linux-stable.git/drivers/usb, branch v6.1.78 Linux kernel stable tree usb: host: xhci-plat: Add support for XHCI_SG_TRB_CACHE_SIZE_QUIRK 2024-02-16T18:06:30+00:00 Prashanth K quic_prashk@quicinc.com 2024-01-16T05:58:16+00:00 8b380ad970d0b0d3dff7451e5c3b540fb9f2e00c commit 520b391e3e813c1dd142d1eebb3ccfa6d08c3995 upstream. Upstream commit bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI which fixes XHC timeout, which was seen on synopsys XHCs while using SG buffers. Currently this quirk can only be set using xhci private data. But there are some drivers like dwc3/host.c which adds adds quirks using software node for xhci device. Hence set this xhci quirk by iterating over device properties. Cc: stable@vger.kernel.org # 5.11 Fixes: bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Link: https://lore.kernel.org/r/20240116055816.1169821-3-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 520b391e3e813c1dd142d1eebb3ccfa6d08c3995 upstream.

Upstream commit bac1ec551434 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. Currently this quirk can only be set using
xhci private data. But there are some drivers like dwc3/host.c
which adds adds quirks using software node for xhci device.
Hence set this xhci quirk by iterating over device properties.

Cc: stable@vger.kernel.org # 5.11
Fixes: bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20240116055816.1169821-3-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: host: Set XHCI_SG_TRB_CACHE_SIZE_QUIRK 2024-02-16T18:06:30+00:00 Prashanth K quic_prashk@quicinc.com 2024-01-16T05:58:15+00:00 f2cf6db28545e999d7ba906c4411e433e27779fb commit 817349b6d26aadd8b38283a05ce0bab106b4c765 upstream. Upstream commit bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI which fixes XHC timeout, which was seen on synopsys XHCs while using SG buffers. But the support for this quirk isn't present in the DWC3 layer. We will encounter this XHCI timeout/hung issue if we run iperf loopback tests using RTL8156 ethernet adaptor on DWC3 targets with scatter-gather enabled. This gets resolved after enabling the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using the xhci device property since its needed for DWC3 controller. In Synopsys DWC3 databook, Table 9-3: xHCI Debug Capability Limitations Chained TRBs greater than TRB cache size: The debug capability driver must not create a multi-TRB TD that describes smaller than a 1K packet that spreads across 8 or more TRBs on either the IN TR or the OUT TR. Cc: stable@vger.kernel.org #5.11 Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240116055816.1169821-2-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 817349b6d26aadd8b38283a05ce0bab106b4c765 upstream.

Upstream commit bac1ec551434 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. But the support for this quirk isn't present
in the DWC3 layer.

We will encounter this XHCI timeout/hung issue if we run iperf
loopback tests using RTL8156 ethernet adaptor on DWC3 targets
with scatter-gather enabled. This gets resolved after enabling
the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using
the xhci device property since its needed for DWC3 controller.

In Synopsys DWC3 databook,
Table 9-3: xHCI Debug Capability Limitations
Chained TRBs greater than TRB cache size: The debug capability
driver must not create a multi-TRB TD that describes smaller
than a 1K packet that spreads across 8 or more TRBs on either
the IN TR or the OUT TR.

Cc: stable@vger.kernel.org #5.11
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240116055816.1169821-2-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: cp210x: add ID for IMST iM871A-USB 2024-02-16T18:06:30+00:00 Leonard Dallmayr leonard.dallmayr@mailbox.org 2024-01-05T12:35:51+00:00 041cb58f54f53f84214a6ce5c902bd420f57863e commit 12b17b4eb82a41977eb848048137b5908d52845c upstream. The device IMST USB-Stick for Smart Meter is a rebranded IMST iM871A-USB Wireless M-Bus USB-adapter. It is used to read wireless water, gas and electricity meters. Signed-off-by: Leonard Dallmayr <leonard.dallmayr@mailbox.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 12b17b4eb82a41977eb848048137b5908d52845c upstream.

The device IMST USB-Stick for Smart Meter is a rebranded IMST iM871A-USB
Wireless M-Bus USB-adapter. It is used to read wireless water, gas and
electricity meters.

Signed-off-by: Leonard Dallmayr <leonard.dallmayr@mailbox.org>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: option: add Fibocom FM101-GL variant 2024-02-16T18:06:29+00:00 Puliang Lu puliang.lu@fibocom.com 2024-01-31T09:12:24+00:00 36ef5b7b4f0ac2ba927139ae9279ac9afa910a88 commit b4a1f4eaf1d798066affc6ad040f76eb1a16e1c9 upstream. Update the USB serial option driver support for the Fibocom FM101-GL LTE modules as there are actually several different variants. - VID:PID 2cb7:01a3, FM101-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS) 0x01a3:mbim,gnss Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a3 Rev=05.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=5ccd5cd4 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Puliang Lu <puliang.lu@fibocom.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b4a1f4eaf1d798066affc6ad040f76eb1a16e1c9 upstream.

Update the USB serial option driver support for the Fibocom
FM101-GL
LTE modules as there are actually several different variants.
- VID:PID 2cb7:01a3, FM101-GL are laptop M.2 cards (with
MBIM interfaces for /Linux/Chrome OS)

0x01a3:mbim,gnss

Here are the outputs of usb-devices:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=01a3 Rev=05.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom FM101-GL Module
S:  SerialNumber=5ccd5cd4
C:  #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

Signed-off-by: Puliang Lu <puliang.lu@fibocom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e 2024-02-16T18:06:29+00:00 JackBB Wu wojackbb@gmail.com 2024-01-23T09:39:48+00:00 234099ab7f8ab0e8a6ba9df24931037bbd0fc21e commit 129690fb229a20b6e563a77a2c85266acecf20bc upstream. Add support for Dell DW5826e with USB-id 0x413c:0x8217 & 0x413c:0x8218. It is 0x413c:0x8217 T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8217 Rev= 5.04 S: Manufacturer=DELL S: Product=COMPAL Electronics EXM-G1A S: SerialNumber=359302940050401 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=qcserial E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms It is 0x413c:0x8218 T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8218 Rev= 0.00 S: Manufacturer=DELL S: Product=COMPAL Electronics EXM-G1A S: SerialNumber=359302940050401 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: JackBB Wu <wojackbb@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 129690fb229a20b6e563a77a2c85266acecf20bc upstream.

Add support for Dell DW5826e with USB-id 0x413c:0x8217 & 0x413c:0x8218.

It is 0x413c:0x8217
T:  Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=413c ProdID=8217 Rev= 5.04
S:  Manufacturer=DELL
S:  Product=COMPAL Electronics EXM-G1A
S:  SerialNumber=359302940050401
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=qcserial
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

It is 0x413c:0x8218
T:  Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=413c ProdID=8218 Rev= 0.00
S:  Manufacturer=DELL
S:  Product=COMPAL Electronics EXM-G1A
S:  SerialNumber=359302940050401
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: JackBB Wu <wojackbb@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hub 2024-02-05T20:12:58+00:00 Hardik Gajjar hgajjar@de.adit-jv.com 2023-12-05T18:18:29+00:00 fa3f6cd20def33e432739924e2046aabe0a002cc [ Upstream commit 855d75cf8311fee156fabb5639bb53757ca83dd4 ] There is a potential delay in notifying Linux USB drivers of downstream USB bus activity when connecting a high-speed or superSpeed device via the Microchip USB491x hub. This delay is due to the fixed bInterval value of 12 in the silicon of the Microchip USB491x hub. Microchip requested to ignore the device descriptor and decrease that value to 9 as it was too late to modify that in silicon. This patch speeds up the USB enummeration process that helps to pass Apple Carplay certifications and improve the User experience when utilizing the USB device via Microchip Multihost USB491x Hub. A new hub quirk HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL speeds up the notification process for Microchip USB491x hub by limiting the maximum bInterval value to 9. Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231205181829.127353-2-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 855d75cf8311fee156fabb5639bb53757ca83dd4 ]

There is a potential delay in notifying Linux USB drivers of downstream
USB bus activity when connecting a high-speed or superSpeed device via the
Microchip USB491x hub. This delay is due to the fixed bInterval value of
12 in the silicon of the Microchip USB491x hub.

Microchip requested to ignore the device descriptor and decrease that
value to 9 as it was too late to modify that in silicon.

This patch speeds up the USB enummeration process that helps to pass
Apple Carplay certifications and improve the User experience when utilizing
the USB device via Microchip Multihost USB491x Hub.

A new hub quirk HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL speeds up
the notification process for Microchip USB491x hub by limiting
the maximum bInterval value to 9.

Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231205181829.127353-2-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: hub: Replace hardcoded quirk value with BIT() macro 2024-02-05T20:12:58+00:00 Hardik Gajjar hgajjar@de.adit-jv.com 2023-12-05T18:18:28+00:00 9cdf5ddb06eef9381b0c4c6e5002a0b1f3ebebae [ Upstream commit 6666ea93d2c422ebeb8039d11e642552da682070 ] This patch replaces the hardcoded quirk value in the macro with BIT(). Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231205181829.127353-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6666ea93d2c422ebeb8039d11e642552da682070 ]

This patch replaces the hardcoded quirk value in the macro with
BIT().

Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231205181829.127353-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: dwc3: gadget: Handle EP0 request dequeuing properly 2024-02-01T00:16:57+00:00 Wesley Cheng quic_wcheng@quicinc.com 2023-12-06T20:18:14+00:00 c519a9054bf7026f308c6a09b29d02fb3a0f39d9 [ Upstream commit 730e12fbec53ab59dd807d981a204258a4cfb29a ] Current EP0 dequeue path will share the same as other EPs. However, there are some special considerations that need to be made for EP0 transfers: - EP0 transfers never transition into the started_list - EP0 only has one active request at a time In case there is a vendor specific control message for a function over USB FFS, then there is no guarantee on the timeline which the DATA/STATUS stage is responded to. While this occurs, any attempt to end transfers on non-control EPs will end up having the DWC3_EP_DELAY_STOP flag set, and defer issuing of the end transfer command. If the USB FFS application decides to timeout the control transfer, or if USB FFS AIO path exits, the USB FFS driver will issue a call to usb_ep_dequeue() for the ep0 request. In case of the AIO exit path, the AIO FS blocks until all pending USB requests utilizing the AIO path is completed. However, since the dequeue of ep0 req does not happen properly, all non-control EPs with the DWC3_EP_DELAY_STOP flag set will not be handled, and the AIO exit path will be stuck waiting for the USB FFS data endpoints to receive a completion callback. Fix is to utilize dwc3_ep0_reset_state() in the dequeue API to ensure EP0 is brought back to the SETUP state, and ensures that any deferred end transfer commands are handled. This also will end any active transfers on EP0, compared to the previous implementation which directly called giveback only. Fixes: fcd2def66392 ("usb: dwc3: gadget: Refactor dwc3_gadget_ep_dequeue") Cc: stable <stable@kernel.org> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20231206201814.32664-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 730e12fbec53ab59dd807d981a204258a4cfb29a ]

Current EP0 dequeue path will share the same as other EPs.  However, there
are some special considerations that need to be made for EP0 transfers:

  - EP0 transfers never transition into the started_list
  - EP0 only has one active request at a time

In case there is a vendor specific control message for a function over USB
FFS, then there is no guarantee on the timeline which the DATA/STATUS stage
is responded to.  While this occurs, any attempt to end transfers on
non-control EPs will end up having the DWC3_EP_DELAY_STOP flag set, and
defer issuing of the end transfer command.  If the USB FFS application
decides to timeout the control transfer, or if USB FFS AIO path exits, the
USB FFS driver will issue a call to usb_ep_dequeue() for the ep0 request.

In case of the AIO exit path, the AIO FS blocks until all pending USB
requests utilizing the AIO path is completed.  However, since the dequeue
of ep0 req does not happen properly, all non-control EPs with the
DWC3_EP_DELAY_STOP flag set will not be handled, and the AIO exit path will
be stuck waiting for the USB FFS data endpoints to receive a completion
callback.

Fix is to utilize dwc3_ep0_reset_state() in the dequeue API to ensure EP0
is brought back to the SETUP state, and ensures that any deferred end
transfer commands are handled.  This also will end any active transfers
on EP0, compared to the previous implementation which directly called
giveback only.

Fixes: fcd2def66392 ("usb: dwc3: gadget: Refactor dwc3_gadget_ep_dequeue")
Cc: stable <stable@kernel.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20231206201814.32664-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: dwc3: gadget: Queue PM runtime idle on disconnect event 2024-02-01T00:16:57+00:00 Wesley Cheng quic_wcheng@quicinc.com 2024-01-03T21:49:46+00:00 c8fe8ce07f1e5616ecb42027a09934748a99e51a [ Upstream commit 3c7af52c7616c3aa6dacd2336ec748d4a65df8f4 ] There is a scenario where DWC3 runtime suspend is blocked due to the dwc->connected flag still being true while PM usage_count is zero after DWC3 giveback is completed and the USB gadget session is being terminated. This leads to a case where nothing schedules a PM runtime idle for the device. The exact condition is seen with the following sequence: 1. USB bus reset is issued by the host 2. Shortly after, or concurrently, a USB PD DR SWAP request is received (sink->source) 3. USB bus reset event handler runs and issues dwc3_stop_active_transfers(), and pending transfer are stopped 4. DWC3 usage_count decremented to 0, and runtime idle occurs while dwc->connected == true, returns -EBUSY 5. DWC3 disconnect event seen, dwc->connected set to false due to DR swap handling 6. No runtime idle after this point Address this by issuing an asynchronous PM runtime idle call after the disconnect event is completed, as it modifies the dwc->connected flag, which is what blocks the initial runtime idle. Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM") Cc: <stable@vger.kernel.org> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20240103214946.2596-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3c7af52c7616c3aa6dacd2336ec748d4a65df8f4 ]

There is a scenario where DWC3 runtime suspend is blocked due to the
dwc->connected flag still being true while PM usage_count is zero after
DWC3 giveback is completed and the USB gadget session is being terminated.
This leads to a case where nothing schedules a PM runtime idle for the
device.

The exact condition is seen with the following sequence:
  1.  USB bus reset is issued by the host
  2.  Shortly after, or concurrently, a USB PD DR SWAP request is received
      (sink->source)
  3.  USB bus reset event handler runs and issues
      dwc3_stop_active_transfers(), and pending transfer are stopped
  4.  DWC3 usage_count decremented to 0, and runtime idle occurs while
      dwc->connected == true, returns -EBUSY
  5.  DWC3 disconnect event seen, dwc->connected set to false due to DR
      swap handling
  6.  No runtime idle after this point

Address this by issuing an asynchronous PM runtime idle call after the
disconnect event is completed, as it modifies the dwc->connected flag,
which is what blocks the initial runtime idle.

Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20240103214946.2596-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API 2024-02-01T00:16:57+00:00 Wesley Cheng quic_wcheng@quicinc.com 2023-04-20T21:27:59+00:00 ce27046883806f77fe351036deb44b90e5803167 [ Upstream commit 8f40fc0808137c157dd408d2632e63bfca2aecdb ] Several sequences utilize the same routine for forcing the control endpoint back into the SETUP phase. This is required, because those operations need to ensure that EP0 is back in the default state. Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20230420212759.29429-3-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 3c7af52c7616 ("usb: dwc3: gadget: Queue PM runtime idle on disconnect event") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8f40fc0808137c157dd408d2632e63bfca2aecdb ]

Several sequences utilize the same routine for forcing the control endpoint
back into the SETUP phase.  This is required, because those operations need
to ensure that EP0 is back in the default state.

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20230420212759.29429-3-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 3c7af52c7616 ("usb: dwc3: gadget: Queue PM runtime idle on disconnect event")
Signed-off-by: Sasha Levin <sashal@kernel.org>