linux-stable.git/drivers/usb, branch v4.9.77 Linux kernel stable tree uas: ignore UAS for Norelsys NS1068(X) chips 2018-01-17T08:38:56+00:00 Icenowy Zheng icenowy@aosc.io 2018-01-05T16:56:44+00:00 3ba5d3a2cf40c4ebdc1f702af3b5dea405a6a11e commit 928afc85270753657b5543e052cc270c279a3fe9 upstream. The UAS mode of Norelsys NS1068(X) is reported to fail to work on several platforms with the following error message: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 1 ep 8 xhci-hcd xhci-hcd.0.auto: @00000000bf04a400 00000000 00000000 1b000000 01098001 And when trying to mount a partition on the disk the disk will disconnect from the USB controller, then after re-connecting the device will be offlined and not working at all. Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 928afc85270753657b5543e052cc270c279a3fe9 upstream.

The UAS mode of Norelsys NS1068(X) is reported to fail to work on
several platforms with the following error message:

xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 1 ep 8
xhci-hcd xhci-hcd.0.auto: @00000000bf04a400 00000000 00000000 1b000000 01098001

And when trying to mount a partition on the disk the disk will
disconnect from the USB controller, then after re-connecting the device
will be offlined and not working at all.

Falling back to USB mass storage can solve this problem, so ignore UAS
function of this chip.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip: vudc_tx: fix v_send_ret_submit() vulnerability to null xfer buffer 2018-01-17T08:38:56+00:00 Shuah Khan shuahkh@osg.samsung.com 2017-12-23T02:23:47+00:00 8ab8c6e6607a14ebd54319535b17e384d2872df9 commit 5fd77a3a0e408c23ab4002a57db980e46bc16e72 upstream. v_send_ret_submit() handles urb with a null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5fd77a3a0e408c23ab4002a57db980e46bc16e72 upstream.

v_send_ret_submit() handles urb with a null transfer_buffer, when it
replays a packet with potential malicious data that could contain a
null buffer.

Add a check for the condition when actual_length > 0 and transfer_buffer
is null.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input 2018-01-17T08:38:56+00:00 Shuah Khan shuahkh@osg.samsung.com 2017-12-23T02:23:46+00:00 86c8d58fc7538d0f44367f49d24568e925049c0d commit b78d830f0049ef1966dc1e0ebd1ec2a594e2cf25 upstream. Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b78d830f0049ef1966dc1e0ebd1ec2a594e2cf25 upstream.

Harden CMD_SUBMIT path to handle malicious input that could trigger
large memory allocations. Add checks to validate transfer_buffer_length
and number_of_packets to protect against bad input requesting for
unbounded memory allocations.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip: remove kernel addresses from usb device and urb debug msgs 2018-01-17T08:38:55+00:00 Shuah Khan shuahkh@osg.samsung.com 2017-12-23T00:00:06+00:00 6851ec74bfe44e8aa568fd00603759c4a2918752 commit e1346fd87c71a1f61de1fe476ec8df1425ac931c upstream. usbip_dump_usb_device() and usbip_dump_urb() print kernel addresses. Remove kernel addresses from usb device and urb debug msgs and improve the message content. Instead of printing parent device and bus addresses, print parent device and bus names. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e1346fd87c71a1f61de1fe476ec8df1425ac931c upstream.

usbip_dump_usb_device() and usbip_dump_urb() print kernel addresses.
Remove kernel addresses from usb device and urb debug msgs and improve
the message content.

Instead of printing parent device and bus addresses, print parent device
and bus names.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: fix usbmon BUG trigger 2018-01-17T08:38:55+00:00 Pete Zaitcev zaitcev@redhat.com 2018-01-08T21:46:41+00:00 435db24bb91f7dd16940d8ddedc3b5ca75547fb5 commit 46eb14a6e1585d99c1b9f58d0e7389082a5f466b upstream. Automated tests triggered this by opening usbmon and accessing the mmap while simultaneously resizing the buffers. This bug was with us since 2006, because typically applications only size the buffers once and thus avoid racing. Reported by Kirill A. Shutemov. Reported-by: <syzbot+f9831b881b3e849829fc@syzkaller.appspotmail.com> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 46eb14a6e1585d99c1b9f58d0e7389082a5f466b upstream.

Automated tests triggered this by opening usbmon and accessing the
mmap while simultaneously resizing the buffers. This bug was with
us since 2006, because typically applications only size the buffers
once and thus avoid racing. Reported by Kirill A. Shutemov.

Reported-by: <syzbot+f9831b881b3e849829fc@syzkaller.appspotmail.com>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: misc: usb3503: make sure reset is low for at least 100us 2018-01-17T08:38:55+00:00 Stefan Agner stefan@agner.ch 2018-01-11T13:47:40+00:00 9f6ca0ea7a7a21963e73d69be42026e5c5954bc4 commit b8626f1dc29d3eee444bfaa92146ec7b291ef41c upstream. When using a GPIO which is high by default, and initialize the driver in USB Hub mode, initialization fails with: [ 111.757794] usb3503 0-0008: SP_ILOCK failed (-5) The reason seems to be that the chip is not properly reset. Probe does initialize reset low, however some lines later the code already set it back high, which is not long enouth. Make sure reset is asserted for at least 100us by inserting a delay after initializing the reset pin during probe. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b8626f1dc29d3eee444bfaa92146ec7b291ef41c upstream.

When using a GPIO which is high by default, and initialize the
driver in USB Hub mode, initialization fails with:
  [  111.757794] usb3503 0-0008: SP_ILOCK failed (-5)

The reason seems to be that the chip is not properly reset.
Probe does initialize reset low, however some lines later the
code already set it back high, which is not long enouth.

Make sure reset is asserted for at least 100us by inserting a
delay after initializing the reset pin during probe.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: cp210x: add new device ID ELV ALC 8xxx 2018-01-17T08:38:55+00:00 Christian Holl cyborgx1@gmail.com 2018-01-03T18:53:02+00:00 11632d079e9e36a5bbfca8e581dba4db305eff10 commit d14ac576d10f865970bb1324d337e5e24d79aaf4 upstream. This adds the ELV ALC 8xxx Battery Charging device to the list of USB IDs of drivers/usb/serial/cp210x.c Signed-off-by: Christian Holl <cyborgx1@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d14ac576d10f865970bb1324d337e5e24d79aaf4 upstream.

This adds the ELV ALC 8xxx Battery Charging device
to the list of USB IDs of drivers/usb/serial/cp210x.c

Signed-off-by: Christian Holl <cyborgx1@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ 2018-01-17T08:38:55+00:00 Diego Elio Pettenò flameeyes@flameeyes.eu 2017-12-29T09:54:25+00:00 4abe275c2deeab918601ce6f520cf514b8738607 commit 4307413256ac1e09b8f53e8715af3df9e49beec3 upstream. Add IDs for the OneTouch Verio IQ that comes with an embedded USB-to-serial converter. Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4307413256ac1e09b8f53e8715af3df9e49beec3 upstream.

Add IDs for the OneTouch Verio IQ that comes with an embedded
USB-to-serial converter.

Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix ring leak in failure path of xhci_alloc_virt_device() 2018-01-17T08:38:52+00:00 Ben Hutchings ben.hutchings@codethink.co.uk 2018-01-11T17:01:36+00:00 66bb6c2c4445d39f4086637d425da77dcc3364ae This is a stable-only fix for the backport of commit 5d9b70f7d52e ("xhci: Don't add a virt_dev to the devs array before it's fully allocated"). In branches that predate commit c5628a2af83a ("xhci: remove endpoint ring cache") there is an additional failure path in xhci_alloc_virt_device() where ring cache allocation fails, in which case we need to free the ring allocated for endpoint 0. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Mathias Nyman <mathias.nyman@intel.com> 
This is a stable-only fix for the backport of commit 5d9b70f7d52e
("xhci: Don't add a virt_dev to the devs array before it's fully
allocated").

In branches that predate commit c5628a2af83a ("xhci: remove endpoint
ring cache") there is an additional failure path in
xhci_alloc_virt_device() where ring cache allocation fails, in
which case we need to free the ring allocated for endpoint 0.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Mathias Nyman <mathias.nyman@intel.com>
usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 2018-01-02T19:35:16+00:00 Daniel Thompson daniel.thompson@linaro.org 2017-12-21T13:06:15+00:00 09d3e69305b32a43de75d36430f9856df8055022 commit da99706689481717998d1d48edd389f339eea979 upstream. When plugging in a USB webcam I see the following message: xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? handle_tx_event: 913 callbacks suppressed All is quiet again with this patch (and I've done a fair but of soak testing with the camera since). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit da99706689481717998d1d48edd389f339eea979 upstream.

When plugging in a USB webcam I see the following message:
xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs
XHCI_TRUST_TX_LENGTH quirk?
handle_tx_event: 913 callbacks suppressed

All is quiet again with this patch (and I've done a fair but of soak
testing with the camera since).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>