linux-stable.git/drivers/usb, branch v4.9.243

USB: Add NO_LPM quirk for Kingston flash drive

2020-11-10T09:24:04+00:00

commit afaa2e745a246c5ab95103a65b1ed00101e1bc63 upstream.

In Bugzilla #208257, Julien Humbert reports that a 32-GB Kingston
flash drive spontaneously disconnects and reconnects, over and over.
Testing revealed that disabling Link Power Management for the drive
fixed the problem.

This patch adds a quirk entry for that drive to turn off LPM permanently.

CC: Hans de Goede 
CC: 
Reported-and-tested-by: Julien Humbert 
Signed-off-by: Alan Stern 
Link: https://lore.kernel.org/r/20201102145821.GA1478741@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Telit FN980 composition 0x1055

2020-11-10T09:24:04+00:00

commit db0362eeb22992502764e825c79b922d7467e0eb upstream.

Add the following Telit FN980 composition:

0x1055: tty, adb, tty, tty, tty, tty

Signed-off-by: Daniele Palmas 
Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231

2020-11-10T09:24:04+00:00

commit 489979b4aab490b6b917c11dc02d81b4b742784a upstream.

Add following Telit LE910Cx compositions:

0x1203: rndis, tty, adb, tty, tty, tty, tty
0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty
0x1231: rndis, tty, adb, audio, tty, tty, tty, tty

Signed-off-by: Daniele Palmas 
Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com
[ johan: add comments after entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: cyberjack: fix write-URB completion race

2020-11-10T09:24:04+00:00

commit 985616f0457d9f555fff417d0da56174f70cc14f upstream.

The write-URB busy flag was being cleared before the completion handler
was done with the URB, something which could lead to corrupt transfers
due to a racing write request if the URB is resubmitted.

Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.")
Cc: stable      # 2.6.13
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

usb: host: fsl-mph-dr-of: check return of dma_set_mask()

2020-11-10T09:23:57+00:00

commit 3cd54a618834430a26a648d880dd83d740f2ae30 upstream.

fsl_usb2_device_register() should stop init if dma_set_mask() return
error.

Fixes: cae058610465 ("drivers/usb/host: fsl: Set DMA_MASK of usb platform device")
Reviewed-by: Peter Chen 
Signed-off-by: Ran Wang 
Link: https://lore.kernel.org/r/20201010060308.33693-1-ran.wang_1@nxp.com
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: core: don't trigger runtime pm when remove driver

2020-11-10T09:23:57+00:00

commit 266d0493900ac5d6a21cdbe6b1624ed2da94d47a upstream.

No need to trigger runtime pm in driver removal, otherwise if user
disable auto suspend via sys file, runtime suspend may be entered,
which will call dwc3_core_exit() again and there will be clock disable
not balance warning:

[ 2026.820154] xhci-hcd xhci-hcd.0.auto: remove, state 4
[ 2026.825268] usb usb2: USB disconnect, device number 1
[ 2026.831017] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[ 2026.836806] xhci-hcd xhci-hcd.0.auto: remove, state 4
[ 2026.842029] usb usb1: USB disconnect, device number 1
[ 2026.848029] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
[ 2026.865889] ------------[ cut here ]------------
[ 2026.870506] usb2_ctrl_root_clk already disabled
[ 2026.875082] WARNING: CPU: 0 PID: 731 at drivers/clk/clk.c:958
clk_core_disable+0xa0/0xa8
[ 2026.883170] Modules linked in: dwc3(-) phy_fsl_imx8mq_usb [last
unloaded: dwc3]
[ 2026.890488] CPU: 0 PID: 731 Comm: rmmod Not tainted
5.8.0-rc7-00280-g9d08cca-dirty #245
[ 2026.898489] Hardware name: NXP i.MX8MQ EVK (DT)
[ 2026.903020] pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
[ 2026.908594] pc : clk_core_disable+0xa0/0xa8
[ 2026.912777] lr : clk_core_disable+0xa0/0xa8
[ 2026.916958] sp : ffff8000121b39a0
[ 2026.920271] x29: ffff8000121b39a0 x28: ffff0000b11f3700
[ 2026.925583] x27: 0000000000000000 x26: ffff0000b539c700
[ 2026.930895] x25: 000001d7e44e1232 x24: ffff0000b76fa800
[ 2026.936208] x23: ffff0000b76fa6f8 x22: ffff800008d01040
[ 2026.941520] x21: ffff0000b539ce00 x20: ffff0000b7105000
[ 2026.946832] x19: ffff0000b7105000 x18: 0000000000000010
[ 2026.952144] x17: 0000000000000001 x16: 0000000000000000
[ 2026.957456] x15: ffff0000b11f3b70 x14: ffffffffffffffff
[ 2026.962768] x13: ffff8000921b36f7 x12: ffff8000121b36ff
[ 2026.968080] x11: ffff8000119e1000 x10: ffff800011bf26d0
[ 2026.973392] x9 : 0000000000000000 x8 : ffff800011bf3000
[ 2026.978704] x7 : ffff800010695d68 x6 : 0000000000000252
[ 2026.984016] x5 : ffff0000bb9881f0 x4 : 0000000000000000
[ 2026.989327] x3 : 0000000000000027 x2 : 0000000000000023
[ 2026.994639] x1 : ac2fa471aa7cab00 x0 : 0000000000000000
[ 2026.999951] Call trace:
[ 2027.002401]  clk_core_disable+0xa0/0xa8
[ 2027.006238]  clk_core_disable_lock+0x20/0x38
[ 2027.010508]  clk_disable+0x1c/0x28
[ 2027.013911]  clk_bulk_disable+0x34/0x50
[ 2027.017758]  dwc3_core_exit+0xec/0x110 [dwc3]
[ 2027.022122]  dwc3_suspend_common+0x84/0x188 [dwc3]
[ 2027.026919]  dwc3_runtime_suspend+0x74/0x9c [dwc3]
[ 2027.031712]  pm_generic_runtime_suspend+0x28/0x40
[ 2027.036419]  genpd_runtime_suspend+0xa0/0x258
[ 2027.040777]  __rpm_callback+0x88/0x140
[ 2027.044526]  rpm_callback+0x20/0x80
[ 2027.048015]  rpm_suspend+0xd0/0x418
[ 2027.051503]  __pm_runtime_suspend+0x58/0xa0
[ 2027.055693]  dwc3_runtime_idle+0x7c/0x90 [dwc3]
[ 2027.060224]  __rpm_callback+0x88/0x140
[ 2027.063973]  rpm_idle+0x78/0x150
[ 2027.067201]  __pm_runtime_idle+0x58/0xa0
[ 2027.071130]  dwc3_remove+0x64/0xc0 [dwc3]
[ 2027.075140]  platform_drv_remove+0x28/0x48
[ 2027.079239]  device_release_driver_internal+0xf4/0x1c0
[ 2027.084377]  driver_detach+0x4c/0xd8
[ 2027.087954]  bus_remove_driver+0x54/0xa8
[ 2027.091877]  driver_unregister+0x2c/0x58
[ 2027.095799]  platform_driver_unregister+0x10/0x18
[ 2027.100509]  dwc3_driver_exit+0x14/0x1408 [dwc3]
[ 2027.105129]  __arm64_sys_delete_module+0x178/0x218
[ 2027.109922]  el0_svc_common.constprop.0+0x68/0x160
[ 2027.114714]  do_el0_svc+0x20/0x80
[ 2027.118031]  el0_sync_handler+0x88/0x190
[ 2027.121953]  el0_sync+0x140/0x180
[ 2027.125267] ---[ end trace 027f4f8189958f1f ]---
[ 2027.129976] ------------[ cut here ]------------

Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM")
Cc: 
Signed-off-by: Li Jun 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: core: add phy cleanup for probe error handling

2020-11-10T09:23:57+00:00

commit 03c1fd622f72c7624c81b64fdba4a567ae5ee9cb upstream.

Add the phy cleanup if dwc3 mode init fail, which is the missing part of
de-init for dwc3 core init.

Fixes: c499ff71ff2a ("usb: dwc3: core: re-factor init and exit paths")
Cc: 
Signed-off-by: Li Jun 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

USB: adutux: fix debugging

2020-11-10T09:23:53+00:00

[ Upstream commit c56150c1bc8da5524831b1dac2eec3c67b89f587 ]

Handling for removal of the controller was missing at one place.
Add it.

Signed-off-by: Oliver Neukum 
Link: https://lore.kernel.org/r/20200917112600.26508-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: gadget: f_ncm: allow using NCM in SuperSpeed Plus gadgets.

2020-10-29T08:05:46+00:00

[ Upstream commit 7974ecd7d3c0f42a98566f281e44ea8573a2ad88 ]

Currently, enabling f_ncm at SuperSpeed Plus speeds results in an
oops in config_ep_by_speed because ncm_set_alt passes in NULL
ssp_descriptors. Fix this by re-using the SuperSpeed descriptors.
This is safe because usb_assign_descriptors calls
usb_copy_descriptors.

Tested: enabled f_ncm on a dwc3 gadget and 10Gbps link, ran iperf
Reviewed-by: Maciej Żenczykowski 
Signed-off-by: Lorenzo Colitti 
Signed-off-by: Felipe Balbi 
Signed-off-by: Sasha Levin

USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().

2020-10-29T08:05:46+00:00

commit 37d2a36394d954413a495da61da1b2a51ecd28ab upstream.

syzbot is reporting hung task at wdm_flush() [1], for there is a circular
dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever
waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget
cannot be called unless close() for /dev/cdc-wdm0 completes.

Tetsuo Handa considered that such circular dependency is an usage error [2]
which corresponds to an unresponding broken hardware [3]. But Alan Stern
responded that we should be prepared for such hardware [4]. Therefore,
this patch changes wdm_flush() to use wait_event_interruptible_timeout()
which gives up after 30 seconds, for hardware that remains silent must be
ignored. The 30 seconds are coming out of thin air.

Changing wait_event() to wait_event_interruptible_timeout() makes error
reporting from close() syscall less reliable. To compensate it, this patch
also implements wdm_fsync() which does not use timeout. Those who want to
be very sure that data has gone out to the device are now advised to call
fsync(), with a caveat that fsync() can return -EINVAL when running on
older kernels which do not implement wdm_fsync().

This patch also fixes three more problems (listed below) found during
exhaustive discussion and testing.

  Since multiple threads can concurrently call wdm_write()/wdm_flush(),
  we need to use wake_up_all() whenever clearing WDM_IN_USE in order to
  make sure that all waiters are woken up. Also, error reporting needs
  to use fetch-and-clear approach in order not to report same error for
  multiple times.

  Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well
  check WDM_DISCONNECTING.

  In wdm_flush(), since locks are not held, it is not safe to dereference
  desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus,
  remove dev_err() from wdm_flush().

[1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186
[2] https://lkml.kernel.org/r/27b7545e-8f41-10b8-7c02-e35a08eb1611@i-love.sakura.ne.jp
[3] https://lkml.kernel.org/r/79ba410f-e0ef-2465-b94f-6b9a4a82adf5@i-love.sakura.ne.jp
[4] https://lkml.kernel.org/r/20200530011040.GB12419@rowland.harvard.edu
[5] https://lkml.kernel.org/r/c85331fc-874c-6e46-a77f-0ef1dc075308@i-love.sakura.ne.jp

Reported-by: syzbot 
Cc: stable 
Co-developed-by: Tetsuo Handa 
Signed-off-by: Tetsuo Handa 
Signed-off-by: Oliver Neukum 
Cc: Alan Stern 
Link: https://lore.kernel.org/r/20200928141755.3476-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman