linux-stable.git/drivers/usb, branch v3.5.2 Linux kernel stable tree usb: feed USB device information to the /dev/random driver 2012-08-15T14:52:48+00:00 Theodore Ts'o tytso@mit.edu 2012-07-04T15:22:20+00:00 13789430b1125b638c1546d248784b18ca589aaa commit b04b3156a20d395a7faa8eed98698d1e17a36000 upstream. Send the USB device's serial, product, and manufacturer strings to the /dev/random driver to help seed its pools. Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b04b3156a20d395a7faa8eed98698d1e17a36000 upstream.

Send the USB device's serial, product, and manufacturer strings to the
/dev/random driver to help seed its pools.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: echi-dbgp: increase the controller wait time to come out of halt. 2012-08-09T15:23:14+00:00 Colin Ian King colin.king@canonical.com 2012-07-30T15:06:42+00:00 df665bff98f8b26731343193dd741c458455b57b commit f96a4216e85050c0a9d41a41ecb0ae9d8e39b509 upstream. The default 10 microsecond delay for the controller to come out of halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond. This is based on emperical testing on various USB debug ports on modern machines such as a Lenovo X220i and an Ivybridge development platform that needed to wait ~450-950 microseconds. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f96a4216e85050c0a9d41a41ecb0ae9d8e39b509 upstream.

The default 10 microsecond delay for the controller to come out of
halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond.

This is based on emperical testing on various USB debug ports on
modern machines such as a Lenovo X220i and an Ivybridge development
platform that needed to wait ~450-950 microseconds.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Fix LPM disable count mismatch on driver unbind. 2012-08-09T15:22:50+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-07-05T21:09:30+00:00 7d9d6c8657eb8542dbe2d22a9135883c0cc4663c commit 249719121bc2b841bdfcab5eb21b10d8b871743b upstream. When a user runs `echo 0 > bConfigurationValue` for a USB 3.0 device, usb_disable_device() is called. This function disables all drivers, deallocates interfaces, and sets the device configuration value to 0 (unconfigured). With the new scheme to ensure that unconfigured devices have LPM disabled, usb_disable_device() must call usb_unlocked_disable_lpm() once it unconfigures the device. This commit should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 249719121bc2b841bdfcab5eb21b10d8b871743b upstream.

When a user runs `echo 0 > bConfigurationValue` for a USB 3.0 device,
usb_disable_device() is called.  This function disables all drivers,
deallocates interfaces, and sets the device configuration value to 0
(unconfigured).

With the new scheme to ensure that unconfigured devices have LPM
disabled, usb_disable_device() must call usb_unlocked_disable_lpm() once
it unconfigures the device.

This commit should be backported to kernels as old as 3.5, that contain
the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB
3.0 LPM in critical sections."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Fix LPM disable/enable during device reset. 2012-08-09T15:22:50+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-07-04T05:49:04+00:00 04947ee17649afcaf53fe40ae74c79c2e81b0615 commit 6d1d051330ee096f575523647fbd8ffe703600b5 upstream. The USB 3.0 specification says that sending a Set Feature or Clear Feature for U1/U2 Enable is not a valid request when the device is in the Default or Addressed state. It is only valid when the device is in the Configured state. The original LPM patch attempted to disable LPM after the device had been reset by hub_port_init(), before it had the configuration reinstalled. The TI hub I tested with did not fail the Clear Feature U1/U2 Enable request that khubd sent while it was in the addressed state, which is why I didn't catch it. Move the LPM disable before the device reset, so that we can send the Clear Feature U1/U2 Enable successfully, and balance the LPM disable count. Also delete any calls to usb_enable_lpm() on error paths that lead to re-enumeration. The calls will fail because the device isn't configured, and it's not useful to balance the LPM disable count because the usb_device is about to be destroyed before re-enumeration. Fix the early exit path ("done" label) to call usb_enable_lpm() to balance the LPM disable count. Note that calling usb_reset_and_verify_device() with an unconfigured device may fail on the first call to usb_disable_lpm(). That's because the LPM disable count is initialized to 0 (LPM enabled), and usb_disable_lpm() will attempt to send a Clear Feature U1/U2 request to a device in the Addressed state. The next patch will fix that. This commit should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6d1d051330ee096f575523647fbd8ffe703600b5 upstream.

The USB 3.0 specification says that sending a Set Feature or Clear
Feature for U1/U2 Enable is not a valid request when the device is in
the Default or Addressed state.  It is only valid when the device is in
the Configured state.

The original LPM patch attempted to disable LPM after the device had
been reset by hub_port_init(), before it had the configuration
reinstalled.  The TI hub I tested with did not fail the Clear Feature
U1/U2 Enable request that khubd sent while it was in the addressed
state, which is why I didn't catch it.

Move the LPM disable before the device reset, so that we can send the
Clear Feature U1/U2 Enable successfully, and balance the LPM disable
count.

Also delete any calls to usb_enable_lpm() on error paths that lead to
re-enumeration.  The calls will fail because the device isn't
configured, and it's not useful to balance the LPM disable count because
the usb_device is about to be destroyed before re-enumeration.

Fix the early exit path ("done" label) to call usb_enable_lpm() to
balance the LPM disable count.

Note that calling usb_reset_and_verify_device() with an unconfigured
device may fail on the first call to usb_disable_lpm().  That's because
the LPM disable count is initialized to 0 (LPM enabled), and
usb_disable_lpm() will attempt to send a Clear Feature U1/U2 request to
a device in the Addressed state.  The next patch will fix that.

This commit should be backported to kernels as old as 3.5, that contain
the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB
3.0 LPM in critical sections."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Disable LPM while the device is unconfigured. 2012-08-09T15:22:50+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-07-04T06:22:38+00:00 9d8d9322bf9445bc2a9241a5c64fcd98f1cb41cd commit 9cf65991dd93ac3d5f97f536171c388918b7c1a9 upstream. The USB 3.0 Set/Clear Feature U1/U2 Enable cannot be sent to a device in the Default or Addressed state. It can only be sent to a configured device. Change the USB core to initialize the LPM disable count to 1 (disabled), which reflects this limitation. Change usb_set_configuration() to ensure that if the device is unconfigured on entry, usb_lpm_disable() is not called. This avoids sending the Clear Feature U1/U2 when the device is in the Addressed state. When usb_set_configuration() exits with a successfully installed configuration, usb_lpm_enable() will be called. Once the new configuration is installed, make sure usb_set_configuration() only calls usb_enable_lpm() if the device moved to the Configured state. If we have unconfigured the device by sending it a Set Configuration for config 0, don't enable LPM. This commit should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9cf65991dd93ac3d5f97f536171c388918b7c1a9 upstream.

The USB 3.0 Set/Clear Feature U1/U2 Enable cannot be sent to a device in
the Default or Addressed state.  It can only be sent to a configured
device.  Change the USB core to initialize the LPM disable count to 1
(disabled), which reflects this limitation.

Change usb_set_configuration() to ensure that if the device is
unconfigured on entry, usb_lpm_disable() is not called.  This avoids
sending the Clear Feature U1/U2 when the device is in the Addressed
state.  When usb_set_configuration() exits with a successfully installed
configuration, usb_lpm_enable() will be called.

Once the new configuration is installed, make sure
usb_set_configuration() only calls usb_enable_lpm() if the device moved
to the Configured state.  If we have unconfigured the device by sending
it a Set Configuration for config 0, don't enable LPM.

This commit should be backported to kernels as old as 3.5, that contain
the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB
3.0 LPM in critical sections."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "usb/uas: make sure data urb is gone if we receive status before that" 2012-08-09T15:22:50+00:00 Gerd Hoffmann kraxel@redhat.com 2012-06-19T07:54:48+00:00 4d86eca2853bfc96b7644b00a18236876984c732 commit c621a81edecdee85da32c566c21836332c764fda upstream. This reverts commit e4d8318a85779b25b880187b1b1c44e797bd7d4b. This patch makes uas.c call usb_unlink_urb on data urbs. The data urbs get freed in the completion callback. This is illegal according to the usb_unlink_urb documentation. This patch also makes the code expect the data completion callback being called before the status completion callback. This isn't guaranteed to be the case, even though the actual data transfer should be finished by the time the status is received. Background: The ehci irq handler for example only know that there are finished transfers, it then has go check the QHs & TDs to see which transfers did actually finish. It has no way to figure in which order the transfers did complete. The xhci driver can call the callbacks in completion order thanks to the event queue. This does nicely explain why the driver is solid on a (usb2) xhci port whereas it goes crazy on ehci in my testing. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c621a81edecdee85da32c566c21836332c764fda upstream.

This reverts commit e4d8318a85779b25b880187b1b1c44e797bd7d4b.

This patch makes uas.c call usb_unlink_urb on data urbs.  The data urbs
get freed in the completion callback.  This is illegal according to the
usb_unlink_urb documentation.

This patch also makes the code expect the data completion callback
being called before the status completion callback.  This isn't
guaranteed to be the case, even though the actual data transfer should
be finished by the time the status is received.

Background:  The ehci irq handler for example only know that there are
finished transfers, it then has go check the QHs & TDs to see which
transfers did actually finish.  It has no way to figure in which order
the transfers did complete.  The xhci driver can call the callbacks in
completion order thanks to the event queue.  This does nicely explain
why the driver is solid on a (usb2) xhci port whereas it goes crazy on
ehci in my testing.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add ZTE MF821D 2012-08-09T15:22:50+00:00 Bjørn Mork bjorn@mork.no 2012-07-12T10:37:32+00:00 ba8d80173baddb3ff4926c320b78fd07b5277185 commit 09110529780890804b22e997ae6b4fe3f0b3b158 upstream. Sold by O2 (telefonica germany) under the name "LTE4G" Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 09110529780890804b22e997ae6b4fe3f0b3b158 upstream.

Sold by O2 (telefonica germany) under the name "LTE4G"

Tested-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: gadget: Fix g_ether interface link status 2012-08-09T15:22:47+00:00 Kevin Cernekee cernekee@gmail.com 2012-06-25T04:11:22+00:00 70264a590873e34ee57e3dff9e8962d4516fe6ba commit 31bde1ceaa873bcaecd49e829bfabceacc4c512d upstream. A "usb0" interface that has never been connected to a host has an unknown operstate, and therefore the IFF_RUNNING flag is (incorrectly) asserted when queried by ifconfig, ifplugd, etc. This is a result of calling netif_carrier_off() too early in the probe function; it should be called after register_netdev(). Similar problems have been fixed in many other drivers, e.g.: e826eafa6 (bonding: Call netif_carrier_off after register_netdevice) 0d672e9f8 (drivers/net: Call netif_carrier_off at the end of the probe) 6a3c869a6 (cxgb4: fix reported state of interfaces without link) Fix is to move netif_carrier_off() to the end of the function. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 31bde1ceaa873bcaecd49e829bfabceacc4c512d upstream.

A "usb0" interface that has never been connected to a host has an unknown
operstate, and therefore the IFF_RUNNING flag is (incorrectly) asserted
when queried by ifconfig, ifplugd, etc.  This is a result of calling
netif_carrier_off() too early in the probe function; it should be called
after register_netdev().

Similar problems have been fixed in many other drivers, e.g.:

    e826eafa6 (bonding: Call netif_carrier_off after register_netdevice)
    0d672e9f8 (drivers/net: Call netif_carrier_off at the end of the probe)
    6a3c869a6 (cxgb4: fix reported state of interfaces without link)

Fix is to move netif_carrier_off() to the end of the function.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbdevfs: Correct amount of data copied to user in processcompl_compat 2012-08-09T15:22:40+00:00 Hans de Goede hdegoede@redhat.com 2012-07-04T07:18:01+00:00 98b8cee65f67067befa26159b1feeba2251659b5 commit 2102e06a5f2e414694921f23591f072a5ba7db9f upstream. iso data buffers may have holes in them if some packets were short, so for iso urbs we should always copy the entire buffer, just like the regular processcompl does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2102e06a5f2e414694921f23591f072a5ba7db9f upstream.

iso data buffers may have holes in them if some packets were short, so for
iso urbs we should always copy the entire buffer, just like the regular
processcompl does.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'mfd-for-linus-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 2012-07-13T16:54:26+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-07-13T16:54:26+00:00 7801dc33bec3ad33f0de2c4138eeb6f785ada8dc Pull MFD Fixes from Samuel Ortiz: - Three Palmas fixes, One of them being a build error fix. - Two mc13xx fixes. One for fixing an SPI regmap configuration and another one for working around an i.Mx hardware bug. - One omap-usb regression fix. - One twl6040 build breakage fix. - One file deletion (ab5500-core.h) that was overlooked during the last merge window. * tag 'mfd-for-linus-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Add missing hunk to change palmas irq to clear on read mfd: Fix palmas regulator pdata missing mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. mfd: Update twl6040 Kconfig to avoid build breakage mfd: Delete ab5500-core.h mfd: mc13xxx workaround SPI hardware bug on i.Mx mfd: Fix mc13xxx SPI regmap mfd: Add terminating entry for i2c_device_id palmas table 
Pull MFD Fixes from Samuel Ortiz:
 - Three Palmas fixes, One of them being a build error fix.
 - Two mc13xx fixes.  One for fixing an SPI regmap configuration and
   another one for working around an i.Mx hardware bug.
 - One omap-usb regression fix.
 - One twl6040 build breakage fix.
 - One file deletion (ab5500-core.h) that was overlooked during the last
   merge window.

* tag 'mfd-for-linus-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Add missing hunk to change palmas irq to clear on read
  mfd: Fix palmas regulator pdata missing
  mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues.
  mfd: Update twl6040 Kconfig to avoid build breakage
  mfd: Delete ab5500-core.h
  mfd: mc13xxx workaround SPI hardware bug on i.Mx
  mfd: Fix mc13xxx SPI regmap
  mfd: Add terminating entry for i2c_device_id palmas table