linux-stable.git/drivers/usb, branch v3.4.9 Linux kernel stable tree usb: feed USB device information to the /dev/random driver 2012-08-15T15:10:28+00:00 Theodore Ts'o tytso@mit.edu 2012-07-04T15:22:20+00:00 76b9be5d7feba335f0bfd4edf0386296cdaf57f2 commit b04b3156a20d395a7faa8eed98698d1e17a36000 upstream. Send the USB device's serial, product, and manufacturer strings to the /dev/random driver to help seed its pools. Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b04b3156a20d395a7faa8eed98698d1e17a36000 upstream.

Send the USB device's serial, product, and manufacturer strings to the
/dev/random driver to help seed its pools.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: echi-dbgp: increase the controller wait time to come out of halt. 2012-08-09T15:31:51+00:00 Colin Ian King colin.king@canonical.com 2012-07-30T15:06:42+00:00 6091e5bc36cc2d74b2c5ab1ae2dcf32cf82e242f commit f96a4216e85050c0a9d41a41ecb0ae9d8e39b509 upstream. The default 10 microsecond delay for the controller to come out of halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond. This is based on emperical testing on various USB debug ports on modern machines such as a Lenovo X220i and an Ivybridge development platform that needed to wait ~450-950 microseconds. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f96a4216e85050c0a9d41a41ecb0ae9d8e39b509 upstream.

The default 10 microsecond delay for the controller to come out of
halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond.

This is based on emperical testing on various USB debug ports on
modern machines such as a Lenovo X220i and an Ivybridge development
platform that needed to wait ~450-950 microseconds.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "usb/uas: make sure data urb is gone if we receive status before that" 2012-08-09T15:31:29+00:00 Gerd Hoffmann kraxel@redhat.com 2012-06-19T07:54:48+00:00 22dacbd152e98dfd627664f5ee3c21d2bd32430b commit c621a81edecdee85da32c566c21836332c764fda upstream. This reverts commit e4d8318a85779b25b880187b1b1c44e797bd7d4b. This patch makes uas.c call usb_unlink_urb on data urbs. The data urbs get freed in the completion callback. This is illegal according to the usb_unlink_urb documentation. This patch also makes the code expect the data completion callback being called before the status completion callback. This isn't guaranteed to be the case, even though the actual data transfer should be finished by the time the status is received. Background: The ehci irq handler for example only know that there are finished transfers, it then has go check the QHs & TDs to see which transfers did actually finish. It has no way to figure in which order the transfers did complete. The xhci driver can call the callbacks in completion order thanks to the event queue. This does nicely explain why the driver is solid on a (usb2) xhci port whereas it goes crazy on ehci in my testing. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c621a81edecdee85da32c566c21836332c764fda upstream.

This reverts commit e4d8318a85779b25b880187b1b1c44e797bd7d4b.

This patch makes uas.c call usb_unlink_urb on data urbs.  The data urbs
get freed in the completion callback.  This is illegal according to the
usb_unlink_urb documentation.

This patch also makes the code expect the data completion callback
being called before the status completion callback.  This isn't
guaranteed to be the case, even though the actual data transfer should
be finished by the time the status is received.

Background:  The ehci irq handler for example only know that there are
finished transfers, it then has go check the QHs & TDs to see which
transfers did actually finish.  It has no way to figure in which order
the transfers did complete.  The xhci driver can call the callbacks in
completion order thanks to the event queue.  This does nicely explain
why the driver is solid on a (usb2) xhci port whereas it goes crazy on
ehci in my testing.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add ZTE MF821D 2012-08-09T15:31:29+00:00 Bjørn Mork bjorn@mork.no 2012-07-12T10:37:32+00:00 11ca5d15e7a84181788c01adc4049a36e387dd84 commit 09110529780890804b22e997ae6b4fe3f0b3b158 upstream. Sold by O2 (telefonica germany) under the name "LTE4G" Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 09110529780890804b22e997ae6b4fe3f0b3b158 upstream.

Sold by O2 (telefonica germany) under the name "LTE4G"

Tested-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: gadget: Fix g_ether interface link status 2012-08-09T15:31:29+00:00 Kevin Cernekee cernekee@gmail.com 2012-06-25T04:11:22+00:00 2cfe89c15298554d5cf9160bf6d8eef290d34041 commit 31bde1ceaa873bcaecd49e829bfabceacc4c512d upstream. A "usb0" interface that has never been connected to a host has an unknown operstate, and therefore the IFF_RUNNING flag is (incorrectly) asserted when queried by ifconfig, ifplugd, etc. This is a result of calling netif_carrier_off() too early in the probe function; it should be called after register_netdev(). Similar problems have been fixed in many other drivers, e.g.: e826eafa6 (bonding: Call netif_carrier_off after register_netdevice) 0d672e9f8 (drivers/net: Call netif_carrier_off at the end of the probe) 6a3c869a6 (cxgb4: fix reported state of interfaces without link) Fix is to move netif_carrier_off() to the end of the function. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 31bde1ceaa873bcaecd49e829bfabceacc4c512d upstream.

A "usb0" interface that has never been connected to a host has an unknown
operstate, and therefore the IFF_RUNNING flag is (incorrectly) asserted
when queried by ifconfig, ifplugd, etc.  This is a result of calling
netif_carrier_off() too early in the probe function; it should be called
after register_netdev().

Similar problems have been fixed in many other drivers, e.g.:

    e826eafa6 (bonding: Call netif_carrier_off after register_netdevice)
    0d672e9f8 (drivers/net: Call netif_carrier_off at the end of the probe)
    6a3c869a6 (cxgb4: fix reported state of interfaces without link)

Fix is to move netif_carrier_off() to the end of the function.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbdevfs: Correct amount of data copied to user in processcompl_compat 2012-08-09T15:31:29+00:00 Hans de Goede hdegoede@redhat.com 2012-07-04T07:18:01+00:00 2af3ad34568307d037dc7ab8f923b51e068b33c4 commit 2102e06a5f2e414694921f23591f072a5ba7db9f upstream. iso data buffers may have holes in them if some packets were short, so for iso urbs we should always copy the entire buffer, just like the regular processcompl does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2102e06a5f2e414694921f23591f072a5ba7db9f upstream.

iso data buffers may have holes in them if some packets were short, so for
iso urbs we should always copy the entire buffer, just like the regular
processcompl does.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix hang on back-to-back Set TR Deq Ptr commands. 2012-07-16T16:04:38+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-06-21T23:28:30+00:00 b62d32b9166b085a487916eca514b59b5ffdf2b7 commit 0d9f78a92ef5e97d9fe51d9215ebe22f6f0d289d upstream. The Microsoft LifeChat 3000 USB headset was causing a very reproducible hang whenever it was plugged in. At first, I thought the host controller was producing bad transfer events, because the log was filled with errors like: xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD However, it turned out to be an xHCI driver bug in the ring expansion patches. The bug is triggered When there are two ring segments, and a TD that ends just before a link TRB, like so: ______________ _____________ | | ---> | setup TRB B | ______________ | _____________ | | | | data TRB B | ______________ | _____________ | setup TRB A | <-- deq | | data TRB B | ______________ | _____________ | data TRB A | | | | <-- enq, deq'' ______________ | _____________ | status TRB A | | | | ______________ | _____________ | link TRB |--------------- | link TRB | _____________ <--- deq' _____________ TD A (the first control transfer) stalls on the data phase. That halts the ring. The xHCI driver moves the hardware dequeue pointer to the first TRB after the stalled transfer, which happens to be the link TRB. Once the Set TR dequeue pointer command completes, the function update_ring_for_set_deq_completion runs. That function is supposed to update the xHCI driver's dequeue pointer to match the internal hardware dequeue pointer. On the first call this would work fine, and the software dequeue pointer would move to deq'. However, if the transfer immediately after that stalled (TD B in this case), another Set TR Dequeue command would be issued. That would move the hardware dequeue pointer to deq''. Once that command completed, update_ring_for_set_deq_completion would run again. The original code would unconditionally increment the software dequeue pointer, which moved the pointer off the ring segment into la-la-land. The while loop would happy increment the dequeue pointer (possibly wrapping it) until it matched the hardware pointer value. The while loop would also access all the memory in between the first ring segment and the second ring segment to determine if it was a link TRB. This could cause general protection faults, although it was unlikely because the ring segments came from a DMA pool, and would often have consecutive memory addresses. If nothing in that space looked like a link TRB, the deq_seg pointer for the ring would remain on the first segment. Thus, the deq_seg and the software dequeue pointer would get out of sync. When the next transfer event came in after the stalled transfer, the xHCI driver code would attempt to convert the software dequeue pointer into a DMA address in order to compare the DMA address for the completed transfer. Since the deq_seg and the dequeue pointer were out of sync, xhci_trb_virt_to_dma would return NULL. The transfer event would get ignored, the transfer would eventually timeout, and we would mistakenly convert the finished transfer to no-op TRBs. Some kernel driver (maybe xHCI?) would then get stuck in an infinite loop in interrupt context, and the whole machine would hang. This patch should be backported to kernels as old as 3.4, that contain the commit b008df60c6369ba0290fa7daa177375407a12e07 "xHCI: count free TRBs on transfer ring" Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0d9f78a92ef5e97d9fe51d9215ebe22f6f0d289d upstream.

The Microsoft LifeChat 3000 USB headset was causing a very reproducible
hang whenever it was plugged in.  At first, I thought the host
controller was producing bad transfer events, because the log was filled
with errors like:

xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD

However, it turned out to be an xHCI driver bug in the ring expansion
patches.  The bug is triggered When there are two ring segments, and a
TD that ends just before a link TRB, like so:

 ______________                     _____________
|              |              ---> | setup TRB B |
 ______________               |     _____________
|              |              |    |  data TRB B |
 ______________               |     _____________
| setup TRB A  | <-- deq      |    |  data TRB B |
 ______________               |     _____________
| data TRB A   |              |    |             | <-- enq, deq''
 ______________               |     _____________
| status TRB A |              |    |             |
 ______________               |     _____________
|  link TRB    |---------------    |  link TRB   |
 _____________  <--- deq'           _____________

TD A (the first control transfer) stalls on the data phase.  That halts
the ring.  The xHCI driver moves the hardware dequeue pointer to the
first TRB after the stalled transfer, which happens to be the link TRB.

Once the Set TR dequeue pointer command completes, the function
update_ring_for_set_deq_completion runs.  That function is supposed to
update the xHCI driver's dequeue pointer to match the internal hardware
dequeue pointer.  On the first call this would work fine, and the
software dequeue pointer would move to deq'.

However, if the transfer immediately after that stalled (TD B in this
case), another Set TR Dequeue command would be issued.  That would move
the hardware dequeue pointer to deq''.  Once that command completed,
update_ring_for_set_deq_completion would run again.

The original code would unconditionally increment the software dequeue
pointer, which moved the pointer off the ring segment into la-la-land.
The while loop would happy increment the dequeue pointer (possibly
wrapping it) until it matched the hardware pointer value.

The while loop would also access all the memory in between the first
ring segment and the second ring segment to determine if it was a link
TRB.  This could cause general protection faults, although it was
unlikely because the ring segments came from a DMA pool, and would often
have consecutive memory addresses.

If nothing in that space looked like a link TRB, the deq_seg pointer for
the ring would remain on the first segment.  Thus, the deq_seg and the
software dequeue pointer would get out of sync.

When the next transfer event came in after the stalled transfer, the
xHCI driver code would attempt to convert the software dequeue pointer
into a DMA address in order to compare the DMA address for the completed
transfer.  Since the deq_seg and the dequeue pointer were out of sync,
xhci_trb_virt_to_dma would return NULL.

The transfer event would get ignored, the transfer would eventually
timeout, and we would mistakenly convert the finished transfer to no-op
TRBs.  Some kernel driver (maybe xHCI?) would then get stuck in an
infinite loop in interrupt context, and the whole machine would hang.

This patch should be backported to kernels as old as 3.4, that contain
the commit b008df60c6369ba0290fa7daa177375407a12e07 "xHCI: count free
TRBs on transfer ring"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: Add support for root hub port status CAS 2012-07-16T16:04:38+00:00 Stanislaw Ledwon staszek.ledwon@linux.jf.intel.com 2012-06-18T13:20:00+00:00 e171ce5cc675f30e226b72eb693cee6832bf0a09 commit 8bea2bd37df08aaa599aa361a9f8b836ba98e554 upstream. The host controller port status register supports CAS (Cold Attach Status) bit. This bit could be set when USB3.0 device is connected when system is in Sx state. When the system wakes to S0 this port status with CAS bit is reported and this port can't be used by any device. When CAS bit is set the port should be reset by warm reset. This was not supported by xhci driver. The issue was found when pendrive was connected to suspended platform. The link state of "Compliance Mode" was reported together with CAS bit. This link state was also not supported by xhci and core/hub.c. The CAS bit is defined only for xhci root hub port and it is not supported on regular hubs. The link status is used to force warm reset on port. Make the USB core issue a warm reset when port is in ether the 'inactive' or 'compliance mode'. Change the xHCI driver to report 'compliance mode' when the CAS is set. This force warm reset on the root hub port. This patch should be backported to stable kernels as old as 3.2, that contain the commit 10d674a82e553cb8a1f41027bb3c3e309b3f6804 "USB: When hot reset for USB3 fails, try warm reset." Signed-off-by: Stanislaw Ledwon <staszek.ledwon@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8bea2bd37df08aaa599aa361a9f8b836ba98e554 upstream.

The host controller port status register supports CAS (Cold Attach
Status) bit. This bit could be set when USB3.0 device is connected
when system is in Sx state. When the system wakes to S0 this port
status with CAS bit is reported and this port can't be used by any
device.

When CAS bit is set the port should be reset by warm reset. This
was not supported by xhci driver.

The issue was found when pendrive was connected to suspended
platform. The link state of "Compliance Mode" was reported together
with CAS bit. This link state was also not supported by xhci and
core/hub.c.

The CAS bit is defined only for xhci root hub port and it is
not supported on regular hubs. The link status is used to force
warm reset on port. Make the USB core issue a warm reset when port
is in ether the 'inactive' or 'compliance mode'. Change the xHCI driver
to report 'compliance mode' when the CAS is set. This force warm reset
on the root hub port.

This patch should be backported to stable kernels as old as 3.2, that
contain the commit 10d674a82e553cb8a1f41027bb3c3e309b3f6804 "USB: When
hot reset for USB3 fails, try warm reset."

Signed-off-by: Stanislaw Ledwon <staszek.ledwon@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: Add MEDIATEK product ids 2012-07-16T16:04:38+00:00 Gaosen Zhang gaosen.zhang@mediatek.com 2012-07-05T13:49:00+00:00 9da79f9050c87ede10fef8a2f723fdf41c5caf57 commit aacef9c561a693341566a6850c451ce3df68cb9a upstream. Signed-off-by: Gaosen Zhang <gaosen.zhang@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit aacef9c561a693341566a6850c451ce3df68cb9a upstream.

Signed-off-by: Gaosen Zhang <gaosen.zhang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add ZTE MF60 2012-07-16T16:04:38+00:00 Bjørn Mork bjorn@mork.no 2012-07-02T17:53:55+00:00 62e4449435b38fbb423f53de5731a18c4d8ddc54 commit 8e16e33c168a6efd0c9f7fa9dd4c1e1db9a74553 upstream. Switches into a composite device by ejecting the initial driver CD. The four interfaces are: QCDM, AT, QMI/wwan and mass storage. Let this driver manage the two serial interfaces: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 28 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1402 Rev= 0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE WCDMA Technologies MSM S: SerialNumber=xxxxx C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8e16e33c168a6efd0c9f7fa9dd4c1e1db9a74553 upstream.

Switches into a composite device by ejecting the initial
driver CD.  The four interfaces are: QCDM, AT, QMI/wwan
and mass storage.  Let this driver manage the two serial
interfaces:

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 28 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=1402 Rev= 0.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE WCDMA Technologies MSM
S:  SerialNumber=xxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>