linux-stable.git/drivers/usb, branch v3.4.48 Linux kernel stable tree USB: io_ti: Fix NULL dereference in chase_port() 2013-06-07T19:49:32+00:00 Wolfgang Frisch wfpub@roembden.net 2013-01-17T00:07:02+00:00 e218bfc6e7efe670459128d6483d8bb200351690 commit 1ee0a224bc9aad1de496c795f96bc6ba2c394811 upstream. The tty is NULL when the port is hanging up. chase_port() needs to check for this. This patch is intended for stable series. The behavior was observed and tested in Linux 3.2 and 3.7.1. Johan Hovold submitted a more elaborate patch for the mainline kernel. [ 56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84 [ 56.278811] usb 1-1: USB disconnect, device number 3 [ 56.278856] usb 1-1: edge_bulk_in_callback - stopping read! [ 56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 [ 56.280536] IP: [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0 [ 56.282085] Oops: 0002 [#1] SMP [ 56.282744] Modules linked in: [ 56.283512] CPU 1 [ 56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox [ 56.283512] RIP: 0010:[<ffffffff8144e62a>] [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP: 0018:ffff88001fa99ab0 EFLAGS: 00010046 [ 56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064 [ 56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8 [ 56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000 [ 56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0 [ 56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4 [ 56.283512] FS: 0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000 [ 56.283512] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0 [ 56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80) [ 56.283512] Stack: [ 56.283512] 0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c [ 56.283512] ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001 [ 56.283512] ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296 [ 56.283512] Call Trace: [ 56.283512] [<ffffffff810578ec>] ? add_wait_queue+0x12/0x3c [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff812ffe81>] ? chase_port+0x84/0x2d6 [ 56.283512] [<ffffffff81063f27>] ? try_to_wake_up+0x199/0x199 [ 56.283512] [<ffffffff81263a5c>] ? tty_ldisc_hangup+0x222/0x298 [ 56.283512] [<ffffffff81300171>] ? edge_close+0x64/0x129 [ 56.283512] [<ffffffff810612f7>] ? __wake_up+0x35/0x46 [ 56.283512] [<ffffffff8106135b>] ? should_resched+0x5/0x23 [ 56.283512] [<ffffffff81264916>] ? tty_port_shutdown+0x39/0x44 [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff8125d38c>] ? __tty_hangup+0x307/0x351 [ 56.283512] [<ffffffff812e6ddc>] ? usb_hcd_flush_endpoint+0xde/0xed [ 56.283512] [<ffffffff8144e625>] ? _raw_spin_lock_irqsave+0x14/0x35 [ 56.283512] [<ffffffff812fd361>] ? usb_serial_disconnect+0x57/0xc2 [ 56.283512] [<ffffffff812ea99b>] ? usb_unbind_interface+0x5c/0x131 [ 56.283512] [<ffffffff8128d738>] ? __device_release_driver+0x7f/0xd5 [ 56.283512] [<ffffffff8128d9cd>] ? device_release_driver+0x1a/0x25 [ 56.283512] [<ffffffff8128d393>] ? bus_remove_device+0xd2/0xe7 [ 56.283512] [<ffffffff8128b7a3>] ? device_del+0x119/0x167 [ 56.283512] [<ffffffff812e8d9d>] ? usb_disable_device+0x6a/0x180 [ 56.283512] [<ffffffff812e2ae0>] ? usb_disconnect+0x81/0xe6 [ 56.283512] [<ffffffff812e4435>] ? hub_thread+0x577/0xe82 [ 56.283512] [<ffffffff8144daa7>] ? __schedule+0x490/0x4be [ 56.283512] [<ffffffff8105798f>] ? abort_exclusive_wait+0x79/0x79 [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff810570b4>] ? kthread+0x81/0x89 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] [<ffffffff8145387c>] ? ret_from_fork+0x7c/0xb0 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00 <f0> 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66 [ 56.283512] RIP [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP <ffff88001fa99ab0> [ 56.283512] CR2: 00000000000001c8 [ 56.283512] ---[ end trace 49714df27e1679ce ]--- Signed-off-by: Wolfgang Frisch <wfpub@roembden.net> Cc: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1ee0a224bc9aad1de496c795f96bc6ba2c394811 upstream.

The tty is NULL when the port is hanging up.
chase_port() needs to check for this.

This patch is intended for stable series.
The behavior was observed and tested in Linux 3.2 and 3.7.1.

Johan Hovold submitted a more elaborate patch for the mainline kernel.

[   56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84
[   56.278811] usb 1-1: USB disconnect, device number 3
[   56.278856] usb 1-1: edge_bulk_in_callback - stopping read!
[   56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8
[   56.280536] IP: [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0
[   56.282085] Oops: 0002 [#1] SMP
[   56.282744] Modules linked in:
[   56.283512] CPU 1
[   56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox
[   56.283512] RIP: 0010:[<ffffffff8144e62a>]  [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.283512] RSP: 0018:ffff88001fa99ab0  EFLAGS: 00010046
[   56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064
[   56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8
[   56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000
[   56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0
[   56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4
[   56.283512] FS:  0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000
[   56.283512] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0
[   56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80)
[   56.283512] Stack:
[   56.283512]  0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c
[   56.283512]  ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001
[   56.283512]  ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296
[   56.283512] Call Trace:
[   56.283512]  [<ffffffff810578ec>] ? add_wait_queue+0x12/0x3c
[   56.283512]  [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28
[   56.283512]  [<ffffffff812ffe81>] ? chase_port+0x84/0x2d6
[   56.283512]  [<ffffffff81063f27>] ? try_to_wake_up+0x199/0x199
[   56.283512]  [<ffffffff81263a5c>] ? tty_ldisc_hangup+0x222/0x298
[   56.283512]  [<ffffffff81300171>] ? edge_close+0x64/0x129
[   56.283512]  [<ffffffff810612f7>] ? __wake_up+0x35/0x46
[   56.283512]  [<ffffffff8106135b>] ? should_resched+0x5/0x23
[   56.283512]  [<ffffffff81264916>] ? tty_port_shutdown+0x39/0x44
[   56.283512]  [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28
[   56.283512]  [<ffffffff8125d38c>] ? __tty_hangup+0x307/0x351
[   56.283512]  [<ffffffff812e6ddc>] ? usb_hcd_flush_endpoint+0xde/0xed
[   56.283512]  [<ffffffff8144e625>] ? _raw_spin_lock_irqsave+0x14/0x35
[   56.283512]  [<ffffffff812fd361>] ? usb_serial_disconnect+0x57/0xc2
[   56.283512]  [<ffffffff812ea99b>] ? usb_unbind_interface+0x5c/0x131
[   56.283512]  [<ffffffff8128d738>] ? __device_release_driver+0x7f/0xd5
[   56.283512]  [<ffffffff8128d9cd>] ? device_release_driver+0x1a/0x25
[   56.283512]  [<ffffffff8128d393>] ? bus_remove_device+0xd2/0xe7
[   56.283512]  [<ffffffff8128b7a3>] ? device_del+0x119/0x167
[   56.283512]  [<ffffffff812e8d9d>] ? usb_disable_device+0x6a/0x180
[   56.283512]  [<ffffffff812e2ae0>] ? usb_disconnect+0x81/0xe6
[   56.283512]  [<ffffffff812e4435>] ? hub_thread+0x577/0xe82
[   56.283512]  [<ffffffff8144daa7>] ? __schedule+0x490/0x4be
[   56.283512]  [<ffffffff8105798f>] ? abort_exclusive_wait+0x79/0x79
[   56.283512]  [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f
[   56.283512]  [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f
[   56.283512]  [<ffffffff810570b4>] ? kthread+0x81/0x89
[   56.283512]  [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c
[   56.283512]  [<ffffffff8145387c>] ? ret_from_fork+0x7c/0xb0
[   56.283512]  [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c
[   56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00
<f0> 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66
[   56.283512] RIP  [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.283512]  RSP <ffff88001fa99ab0>
[   56.283512] CR2: 00000000000001c8
[   56.283512] ---[ end trace 49714df27e1679ce ]---

Signed-off-by: Wolfgang Frisch <wfpub@roembden.net>
Cc: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: UHCI: fix for suspend of virtual HP controller 2013-06-07T19:49:12+00:00 Alan Stern stern@rowland.harvard.edu 2013-05-14T17:55:29+00:00 ee4998cca0218751458709c0db61d258adb6a86d commit 997ff893603c6455da4c5e26ba1d0f81adfecdfc upstream. HP's virtual UHCI host controller takes a long time to suspend (several hundred microseconds), even when no devices are attached. This provokes a warning message from uhci-hcd in the auto-stop case. To prevent this from happening, this patch adds a test to avoid performing an auto-stop when the wait_for_hp quirk flag is set. The controller will still suspend through the normal runtime PM mechanism. And since that pathway includes a 1-ms delay, the slowness of the virtual hardware won't matter. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: ZhenHua <zhen-hual@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 997ff893603c6455da4c5e26ba1d0f81adfecdfc upstream.

HP's virtual UHCI host controller takes a long time to suspend
(several hundred microseconds), even when no devices are attached.
This provokes a warning message from uhci-hcd in the auto-stop case.

To prevent this from happening, this patch adds a test to avoid
performing an auto-stop when the wait_for_hp quirk flag is set.  The
controller will still suspend through the normal runtime PM mechanism.
And since that pathway includes a 1-ms delay, the slowness of the
virtual hardware won't matter.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: ZhenHua <zhen-hual@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: xHCI: override bogus bulk wMaxPacketSize values 2013-06-07T19:49:12+00:00 Alan Stern stern@rowland.harvard.edu 2013-05-08T15:18:05+00:00 99d96e8cd47fddbe3170339889440d44181a6f03 commit e4f47e3675e6f1f40906b785b934ce963e9f2eb3 upstream. This patch shortens the logic in xhci_endpoint_init() by moving common calculations involving max_packet and max_burst outside the switch statement, rather than repeating the same code in multiple case-specific statements. It also replaces two usages of max_packet which were clearly intended to be max_burst all along. More importantly, it compensates for a common bug in high-speed bulk endpoint descriptors. In many devices there is a bulk endpoint having a wMaxPacketSize value smaller than 512, which is forbidden by the USB spec. Some xHCI controllers can't handle this and refuse to accept the endpoint. This patch changes the max_packet value to 512, which allows the controller to use the endpoint properly. In practice the bogus maxpacket size doesn't matter, because none of the transfers sent via these endpoints are longer than the maxpacket value anyway. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: "Aurélien Leblond" <blablack@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e4f47e3675e6f1f40906b785b934ce963e9f2eb3 upstream.

This patch shortens the logic in xhci_endpoint_init() by moving common
calculations involving max_packet and max_burst outside the switch
statement, rather than repeating the same code in multiple
case-specific statements.  It also replaces two usages of max_packet
which were clearly intended to be max_burst all along.

More importantly, it compensates for a common bug in high-speed bulk
endpoint descriptors.  In many devices there is a bulk endpoint having
a wMaxPacketSize value smaller than 512, which is forbidden by the USB
spec.  Some xHCI controllers can't handle this and refuse to accept
the endpoint.  This patch changes the max_packet value to 512, which
allows the controller to use the endpoint properly.

In practice the bogus maxpacket size doesn't matter, because none of
the transfers sent via these endpoints are longer than the maxpacket
value anyway.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: "Aurélien Leblond" <blablack@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: reset resume quirk needed by a hub 2013-06-07T19:49:11+00:00 Oliver Neukum oliver@neukum.org 2013-04-30T08:18:04+00:00 50b66a0542f04773803152b9b2cfba37f9c50508 commit bac6b03275184c912ad0818c9a0a736847804dca upstream. Werner Fink has reported problems with this hub. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bac6b03275184c912ad0818c9a0a736847804dca upstream.

Werner Fink has reported problems with this hub.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Blacklisted Cinterion's PLxx WWAN Interface 2013-06-07T19:49:11+00:00 Schemmel Hans-Christoph Hans-Christoph.Schemmel@gemalto.com 2013-05-06T09:05:12+00:00 dd920425bdbd59d9b81b28ea72e74ec9f16c6303 commit 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db upstream. /drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN Interface (USB Interface 4), because it will be handled by QMI WWAN driver. Product IDs renamed. Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db upstream.

/drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN
Interface (USB Interface 4), because it will be handled by QMI WWAN
driver. Product IDs renamed.

Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cxacru: potential underflow in cxacru_cm_get_array() 2013-06-07T19:49:11+00:00 Dan Carpenter dan.carpenter@oracle.com 2013-05-19T18:52:20+00:00 fcaa80f4f20519ee7d432d727b375e7a181e6a50 commit 2a0ebf80aa95cc758d4725f74a7016e992606a39 upstream. The value of "offd" comes off the instance->rcv_buf[] and we used it as the offset into an array. The problem is that we check the upper bound but not for negative values. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2a0ebf80aa95cc758d4725f74a7016e992606a39 upstream.

The value of "offd" comes off the instance->rcv_buf[] and we used it as
the offset into an array.  The problem is that we check the upper bound
but not for negative values.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ftdi_sio: Add support for Newport CONEX motor drivers 2013-06-07T19:49:11+00:00 Gomella, Andrew (NIH/NHLBI) [F] andrew.gomella@nih.gov 2013-05-17T17:39:46+00:00 dc8e739467bb6552d5e8325d5f32e356f48da3b6 commit 7138143972b7c293267c783fc99a194f0ceff7f2 upstream. Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by: Andrew Gomella <andrew.gomella@nih.gov> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7138143972b7c293267c783fc99a194f0ceff7f2 upstream.

Here are two more devices that use FTDI USB-to-serial chips with new product ID's.

The devices are the Newport Conex-AGP and Conex-CC motor controllers.
(http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx)
(http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx)

usb-devices command yields:

P:  Vendor=104d ProdID=3002 Rev=06.00
S:  Manufacturer=Newport
S:  Product=CONEX-CC

as well as

P:  Vendor=104d ProdID=3006 Rev=06.00
S:  Manufacturer=Newport
S:  Product=CONEX-AGP

Signed-off-by: Andrew Gomella <andrew.gomella@nih.gov>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card 2013-06-07T19:49:11+00:00 Dan Williams dcbw@redhat.com 2013-05-06T21:16:44+00:00 a581e4548c542cd57da45d90f2bed66f630fffbd commit 49c6e370dd6400b84897c4100095089b5c13a061 upstream. A rebranded Novatel E371 for AT&T's LTE bands. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 49c6e370dd6400b84897c4100095089b5c13a061 upstream.

A rebranded Novatel E371 for AT&T's LTE bands.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: option: Add Telewell TW-LTE 4G 2013-06-07T19:49:10+00:00 Teppo Kotilainen qubit303@gmail.com 2013-05-03T07:28:12+00:00 b0ed66800bebf267c074bd7ff70daf69950d1698 commit 73c042df6e1bc50544842a04b777b36bbe3630e6 upstream. Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by: Teppo Kotilainen <qubit303@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 73c042df6e1bc50544842a04b777b36bbe3630e6 upstream.

Information from driver description files:

  diag:  VID_19D2&PID_0412&MI_00
  nmea:  VID_19D2&PID_0412&MI_01
  at:    VID_19D2&PID_0412&MI_02
  modem: VID_19D2&PID_0412&MI_03
  net:   VID_19D2&PID_0412&MI_04

Signed-off-by: Teppo Kotilainen <qubit303@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Don't warn on empty ring for suspended devices. 2013-05-11T20:48:08+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-03-18T17:19:51+00:00 8aa9f568094b04d7662d69c9757efae7155c25ac commit a83d6755814e4614ba77e15d82796af0f695c6b8 upstream. When a device attached to the roothub is suspended, the endpoint rings are stopped. The host may generate a completion event with the completion code set to 'Stopped' or 'Stopped Invalid' when the ring is halted. The current xHCI code prints a warning in that case, which can be really annoying if the USB device is coming into and out of suspend. Remove the unnecessary warning. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Stephen Hemminger <stephen@networkplumber.org> Cc: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a83d6755814e4614ba77e15d82796af0f695c6b8 upstream.

When a device attached to the roothub is suspended, the endpoint rings
are stopped.  The host may generate a completion event with the
completion code set to 'Stopped' or 'Stopped Invalid' when the ring is
halted.  The current xHCI code prints a warning in that case, which can
be really annoying if the USB device is coming into and out of suspend.

Remove the unnecessary warning.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Stephen Hemminger <stephen@networkplumber.org>
Cc: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>