linux-stable.git/drivers/usb, branch v3.4.36 Linux kernel stable tree USB: Fix connected device switch to Inactive state. 2013-03-14T18:29:52+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-03-13T17:59:21+00:00 8420d82e3a25e0f64526db253056945b1585dc08 [This is upstream commit d3b9d7a9051d7024a93c76a84b2f84b3b66ad6d5. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm reset failure on empty port."] A USB 3.0 device can transition to the Inactive state if a U1 or U2 exit transition fails. The current code in hub_events simply issues a warm reset, but does not call any pre-reset or post-reset driver methods (or unbind/rebind drivers without them). Therefore the drivers won't know their device has just been reset. hub_events should instead call usb_reset_device. This means hub_port_reset now needs to figure out whether it should issue a warm reset or a hot reset. Remove the FIXME note about needing disconnect() for a NOTATTACHED device. This patch fixes that. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[This is upstream commit d3b9d7a9051d7024a93c76a84b2f84b3b66ad6d5.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

A USB 3.0 device can transition to the Inactive state if a U1 or U2 exit
transition fails.  The current code in hub_events simply issues a warm
reset, but does not call any pre-reset or post-reset driver methods (or
unbind/rebind drivers without them).  Therefore the drivers won't know
their device has just been reset.

hub_events should instead call usb_reset_device.  This means
hub_port_reset now needs to figure out whether it should issue a warm
reset or a hot reset.

Remove the FIXME note about needing disconnect() for a NOTATTACHED
device.  This patch fixes that.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Rip out recursive call on warm port reset. 2013-03-14T18:29:52+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-03-08T00:24:24+00:00 beabe20445c60322719d8f58e9eb9dd4660c1b3e [This is upstream commit 24a6078754f28528bc91e7e7b3e6ae86bd936d8. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm reset failure on empty port."] When a hot reset fails on a USB 3.0 port, the current port reset code recursively calls hub_port_reset inside hub_port_wait_reset. This isn't ideal, since we should avoid recursive calls in the kernel, and it also doesn't allow us to issue multiple warm resets on reset failures. Rip out the recursive call. Instead, add code to hub_port_reset to issue a warm reset if the hot reset fails, and try multiple warm resets before giving up on the port. In hub_port_wait_reset, remove the recursive call and re-indent. The code is basically the same, except: 1. It bails out early if the port has transitioned to Inactive or Compliance Mode after the reset completed. 2. It doesn't consider a connect status change to be a failed reset. If multiple warm resets needed to be issued, the connect status may have changed, so we need to ignore that and look at the port link state instead. hub_port_reset will now do that. 3. It unconditionally sets udev->speed on all types of successful resets. The old recursive code would set the port speed when the second hub_port_reset returned. The old code did not handle connected devices needing a warm reset well. There were only two situations that the old code handled correctly: an empty port needing a warm reset, and a hot reset that migrated to a warm reset. When an empty port needed a warm reset, hub_port_reset was called with the warm variable set. The code in hub_port_finish_reset would skip telling the USB core and the xHC host that the device was reset, because otherwise that would result in a NULL pointer dereference. When a USB 3.0 device reset migrated to a warm reset, the recursive call made the call stack look like this: hub_port_reset(warm = false) hub_wait_port_reset(warm = false) hub_port_reset(warm = true) hub_wait_port_reset(warm = true) hub_port_finish_reset(warm = true) (return up the call stack to the first wait) hub_port_finish_reset(warm = false) The old code didn't want to notify the USB core or the xHC host of device reset twice, so it only did it in the second call to hub_port_finish_reset, when warm was set to false. This was necessary because before patch two ("USB: Ignore xHCI Reset Device status."), the USB core would pay attention to the xHC Reset Device command error status, and the second call would always fail. Now that we no longer have the recursive call, and warm can change from false to true in hub_port_reset, we need to have hub_port_finish_reset unconditionally notify the USB core and the xHC of the device reset. In hub_port_finish_reset, unconditionally clear the connect status change (CSC) bit for USB 3.0 hubs when the port reset is done. If we had to issue multiple warm resets for a device, that bit may have been set if the device went into SS.Inactive and then was successfully warm reset. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[This is upstream commit 24a6078754f28528bc91e7e7b3e6ae86bd936d8.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

When a hot reset fails on a USB 3.0 port, the current port reset code
recursively calls hub_port_reset inside hub_port_wait_reset.  This isn't
ideal, since we should avoid recursive calls in the kernel, and it also
doesn't allow us to issue multiple warm resets on reset failures.

Rip out the recursive call.  Instead, add code to hub_port_reset to
issue a warm reset if the hot reset fails, and try multiple warm resets
before giving up on the port.

In hub_port_wait_reset, remove the recursive call and re-indent.  The
code is basically the same, except:

1. It bails out early if the port has transitioned to Inactive or
Compliance Mode after the reset completed.

2. It doesn't consider a connect status change to be a failed reset.  If
multiple warm resets needed to be issued, the connect status may have
changed, so we need to ignore that and look at the port link state
instead.  hub_port_reset will now do that.

3. It unconditionally sets udev->speed on all types of successful
resets.  The old recursive code would set the port speed when the second
hub_port_reset returned.

The old code did not handle connected devices needing a warm reset well.
There were only two situations that the old code handled correctly: an
empty port needing a warm reset, and a hot reset that migrated to a warm
reset.

When an empty port needed a warm reset, hub_port_reset was called with
the warm variable set.  The code in hub_port_finish_reset would skip
telling the USB core and the xHC host that the device was reset, because
otherwise that would result in a NULL pointer dereference.

When a USB 3.0 device reset migrated to a warm reset, the recursive call
made the call stack look like this:

hub_port_reset(warm = false)
        hub_wait_port_reset(warm = false)
                hub_port_reset(warm = true)
                        hub_wait_port_reset(warm = true)
                        hub_port_finish_reset(warm = true)
                        (return up the call stack to the first wait)

        hub_port_finish_reset(warm = false)

The old code didn't want to notify the USB core or the xHC host of device reset
twice, so it only did it in the second call to hub_port_finish_reset,
when warm was set to false.  This was necessary because
before patch two ("USB: Ignore xHCI Reset Device status."), the USB core
would pay attention to the xHC Reset Device command error status, and
the second call would always fail.

Now that we no longer have the recursive call, and warm can change from
false to true in hub_port_reset, we need to have hub_port_finish_reset
unconditionally notify the USB core and the xHC of the device reset.

In hub_port_finish_reset, unconditionally clear the connect status
change (CSC) bit for USB 3.0 hubs when the port reset is done.  If we
had to issue multiple warm resets for a device, that bit may have been
set if the device went into SS.Inactive and then was successfully warm
reset.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Prepare for refactoring by adding extra udev checks. 2013-03-14T18:29:51+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-03-08T00:24:22+00:00 e850004e595d6322c6b7ccbfe21a4582051ad56b [This is upstream commit 2d4fa940f99663c82ba55b2244638833b388e4e2. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm reset failure on empty port."] The next patch will refactor the hub port code to rip out the recursive call to hub_port_reset on a failed hot reset. In preparation for that, make sure all code paths can deal with being called with a NULL udev. The usb_device will not be valid if warm reset was issued because a port transitioned to the Inactive or Compliance Mode on a device connect. This patch should have no effect on current behavior. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[This is upstream commit 2d4fa940f99663c82ba55b2244638833b388e4e2.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

The next patch will refactor the hub port code to rip out the recursive
call to hub_port_reset on a failed hot reset.  In preparation for that,
make sure all code paths can deal with being called with a NULL udev.
The usb_device will not be valid if warm reset was issued because a port
transitioned to the Inactive or Compliance Mode on a device connect.

This patch should have no effect on current behavior.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Don't use EHCI port sempahore for USB 3.0 hubs. 2013-03-14T18:29:51+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-03-08T00:24:19+00:00 ac79dc9b4a929bd8c0d9e4a2fccd3b7215cbaee4 [This is upstream commit 0fe51aa5eee51db7c7ecd201d42a977ad79c58b6. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm reset failure on empty port."] The EHCI host controller needs to prevent EHCI initialization when the UHCI or OHCI companion controller is in the middle of a port reset. It uses ehci_cf_port_reset_rwsem to do this. USB 3.0 hubs can't be under an EHCI host controller, so it makes no sense to down the semaphore for USB 3.0 hubs. It also makes the warm port reset code more complex. Don't down ehci_cf_port_reset_rwsem for USB 3.0 hubs. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[This is upstream commit 0fe51aa5eee51db7c7ecd201d42a977ad79c58b6.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

The EHCI host controller needs to prevent EHCI initialization when the
UHCI or OHCI companion controller is in the middle of a port reset.  It
uses ehci_cf_port_reset_rwsem to do this.  USB 3.0 hubs can't be under
an EHCI host controller, so it makes no sense to down the semaphore for
USB 3.0 hubs.  It also makes the warm port reset code more complex.

Don't down ehci_cf_port_reset_rwsem for USB 3.0 hubs.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: usb-storage: unusual_devs update for Super TOP SATA bridge 2013-02-28T14:59:07+00:00 Josh Boyer jwboyer@redhat.com 2013-02-14T14:39:09+00:00 616dd23b2e475e61a2974eb112cc88d3cb94d47f commit 18e03310b5caa6d11c1a8c61b982c37047693fba upstream. The current entry in unusual_cypress.h for the Super TOP SATA bridge devices seems to be causing corruption on newer revisions of this device. This has been reported in Arch Linux and Fedora. The original patch was tested on devices with bcdDevice of 1.60, whereas the newer devices report bcdDevice as 2.20. Limit the UNUSUAL_DEV entry to devices less than 2.20. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=909591 The Arch Forum post on this is here: https://bbs.archlinux.org/viewtopic.php?id=152011 Reported-by: Carsten S. <carsteniq@yahoo.com> Tested-by: Carsten S. <carsteniq@yahoo.com> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 18e03310b5caa6d11c1a8c61b982c37047693fba upstream.

The current entry in unusual_cypress.h for the Super TOP SATA bridge devices
seems to be causing corruption on newer revisions of this device.  This has
been reported in Arch Linux and Fedora.  The original patch was tested on
devices with bcdDevice of 1.60, whereas the newer devices report bcdDevice
as 2.20.  Limit the UNUSUAL_DEV entry to devices less than 2.20.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=909591

The Arch Forum post on this is here:
	https://bbs.archlinux.org/viewtopic.php?id=152011

Reported-by: Carsten S. <carsteniq@yahoo.com>
Tested-by: Carsten S. <carsteniq@yahoo.com>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: storage: properly handle the endian issues of idProduct 2013-02-28T14:59:07+00:00 fangxiaozhi huananhu@huawei.com 2013-02-07T07:32:07+00:00 12b64a247ef45dcd865a98d63bbae7355e51633b commit cd060956c5e97931c3909e4a808508469c0bb9f6 upstream. 1. The idProduct is little endian, so make sure its value to be compatible with the current CPU. Make no break on big endian processors. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cd060956c5e97931c3909e4a808508469c0bb9f6 upstream.

1. The idProduct is little endian, so make sure its value to be
compatible with the current CPU. Make no break on big endian processors.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ehci-omap: Fix autoloading of module 2013-02-28T14:59:06+00:00 Roger Quadros rogerq@ti.com 2013-02-14T15:08:09+00:00 30361160bc12da86b9ce4c7c60bd68ff930eda76 commit 04753523266629b1cd0518091da1658755787198 upstream. The module alias should be "ehci-omap" and not "omap-ehci" to match the platform device name. The omap-ehci module should now autoload correctly. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 04753523266629b1cd0518091da1658755787198 upstream.

The module alias should be "ehci-omap" and not
"omap-ehci" to match the platform device name.
The omap-ehci module should now autoload correctly.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add Huawei "ACM" devices using protocol = vendor 2013-02-28T14:59:06+00:00 Bjørn Mork bjorn@mork.no 2013-02-13T22:41:34+00:00 9c5879c55ecc7c5b0e54809e011561bde4926d14 commit 1f3f687722fd9b29a0c2a85b4844e3b2a3585c63 upstream. The USB device descriptor of one identity presented by a few Huawei morphing devices have serial functions with class codes 02/02/ff, indicating CDC ACM with a vendor specific protocol. This combination is often used for MSFT RNDIS functions, and the CDC ACM class driver will therefore ignore such functions. The CDC ACM class driver cannot support functions with only 2 endpoints. The underlying serial functions of these modems are also believed to be the same as for alternate device identities already supported by the option driver. Letting the same driver handle these functions independently of the current identity ensures consistent handling and user experience. There is no need to blacklist these devices in the rndis_host driver. Huawei serial functions will either have only 2 endpoints or a CDC ACM functional descriptor with bmCapabilities != 0, making them correctly ignored as "non RNDIS" by that driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1f3f687722fd9b29a0c2a85b4844e3b2a3585c63 upstream.

The USB device descriptor of one identity presented by a few
Huawei morphing devices have serial functions with class codes
02/02/ff, indicating CDC ACM with a vendor specific protocol. This
combination is often used for MSFT RNDIS functions, and the CDC
ACM class driver will therefore ignore such functions.

The CDC ACM class driver cannot support functions with only 2
endpoints.  The underlying serial functions of these modems are
also believed to be the same as for alternate device identities
already supported by the option driver. Letting the same driver
handle these functions independently of the current identity
ensures consistent handling and user experience.

There is no need to blacklist these devices in the rndis_host
driver. Huawei serial functions will either have only 2 endpoints
or a CDC ACM functional descriptor with bmCapabilities != 0, making
them correctly ignored as "non RNDIS" by that driver.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add Yota / Megafon M100-1 4g modem 2013-02-28T14:59:06+00:00 Bjørn Mork bjorn@mork.no 2013-02-12T12:42:24+00:00 0457c05d7f770e5b1581ecc1357b4c2b7b336808 commit cd565279e51bedee1b2988e84f9b3bef485adeb6 upstream. Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cd565279e51bedee1b2988e84f9b3bef485adeb6 upstream.

Interface layout:

 00 CD-ROM
 01 debug COM port
 02 AP control port
 03 modem
 04 usb-ethernet

Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0408 ProdID=ea42 Rev= 0.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=Qualcomm CDMA Technologies MSM
S:  SerialNumber=353568051xxxxxx
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add and update Alcatel modems 2013-02-28T14:59:06+00:00 Bjørn Mork bjorn@mork.no 2013-01-23T09:44:36+00:00 78b42978accff2b4ccc45f399c47841d697e166f commit f8f0302bbcbd1b14655bef29f6996a2152be559d upstream. Adding three currently unsupported modems based on information from .inf driver files: Diag VID_1BBB&PID_0052&MI_00 AGPS VID_1BBB&PID_0052&MI_01 VOICE VID_1BBB&PID_0052&MI_02 AT VID_1BBB&PID_0052&MI_03 Modem VID_1BBB&PID_0052&MI_05 wwan VID_1BBB&PID_0052&MI_06 Diag VID_1BBB&PID_00B6&MI_00 AT VID_1BBB&PID_00B6&MI_01 Modem VID_1BBB&PID_00B6&MI_02 wwan VID_1BBB&PID_00B6&MI_03 Diag VID_1BBB&PID_00B7&MI_00 AGPS VID_1BBB&PID_00B7&MI_01 VOICE VID_1BBB&PID_00B7&MI_02 AT VID_1BBB&PID_00B7&MI_03 Modem VID_1BBB&PID_00B7&MI_04 wwan VID_1BBB&PID_00B7&MI_05 Updating the blacklist info for the X060S_X200 and X220_X500D, reserving interfaces for a wwan driver, based on wwan VID_1BBB&PID_0000&MI_04 wwan VID_1BBB&PID_0017&MI_06 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f8f0302bbcbd1b14655bef29f6996a2152be559d upstream.

Adding three currently unsupported modems based on information
from .inf driver files:

  Diag  VID_1BBB&PID_0052&MI_00
  AGPS  VID_1BBB&PID_0052&MI_01
  VOICE VID_1BBB&PID_0052&MI_02
  AT    VID_1BBB&PID_0052&MI_03
  Modem VID_1BBB&PID_0052&MI_05
  wwan  VID_1BBB&PID_0052&MI_06

  Diag  VID_1BBB&PID_00B6&MI_00
  AT    VID_1BBB&PID_00B6&MI_01
  Modem VID_1BBB&PID_00B6&MI_02
  wwan  VID_1BBB&PID_00B6&MI_03

  Diag  VID_1BBB&PID_00B7&MI_00
  AGPS  VID_1BBB&PID_00B7&MI_01
  VOICE VID_1BBB&PID_00B7&MI_02
  AT    VID_1BBB&PID_00B7&MI_03
  Modem VID_1BBB&PID_00B7&MI_04
  wwan  VID_1BBB&PID_00B7&MI_05

Updating the blacklist info for the X060S_X200 and X220_X500D,
reserving interfaces for a wwan driver, based on

  wwan VID_1BBB&PID_0000&MI_04
  wwan VID_1BBB&PID_0017&MI_06

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>