linux-stable.git/drivers/usb, branch v3.4.112 Linux kernel stable tree usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message 2016-04-27T10:55:30+00:00 Ben Hutchings ben@decadent.org.uk 2015-11-18T02:01:21+00:00 e08cc94c26fab53cf0d2c655ecdcaf39d31dd18a commit 5377adb092664d336ac212499961cac5e8728794 upstream. usb_parse_ss_endpoint_companion() now decodes the burst multiplier correctly in order to check that it's <= 3, but still uses the wrong expression if warning that it's > 3. Fixes: ff30cbc8da42 ("usb: Use the USB_SS_MULT() macro to get the ...") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 5377adb092664d336ac212499961cac5e8728794 upstream.

usb_parse_ss_endpoint_companion() now decodes the burst multiplier
correctly in order to check that it's <= 3, but still uses the wrong
expression if warning that it's > 3.

Fixes: ff30cbc8da42 ("usb: Use the USB_SS_MULT() macro to get the ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
xhci: Add spurious wakeup quirk for LynxPoint-LP controllers 2016-04-27T10:55:28+00:00 Laura Abbott labbott@fedoraproject.org 2015-10-12T08:30:13+00:00 4333b97f9ab15347378efda6370f9eea974ad94a commit fd7cd061adcf5f7503515ba52b6a724642a839c8 upstream. We received several reports of systems rebooting and powering on after an attempted shutdown. Testing showed that setting XHCI_SPURIOUS_WAKEUP quirk in addition to the XHCI_SPURIOUS_REBOOT quirk allowed the system to shutdown as expected for LynxPoint-LP xHCI controllers. Set the quirk back. Note that the quirk was originally introduced for LynxPoint and LynxPoint-LP just for this same reason. See: commit 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell") It was later limited to only concern HP machines as it caused regression on some machines, see both bug and commit: Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66171 commit 6962d914f317 ("xhci: Limit the spurious wakeup fix only to HP machines") Later it was discovered that the powering on after shutdown was limited to LynxPoint-LP (Haswell-ULT) and that some non-LP HP machine suffered from spontaneous resume from S3 (which should not be related to the SPURIOUS_WAKEUP quirk at all). An attempt to fix this then removed the SPURIOUS_WAKEUP flag usage completely. commit b45abacde3d5 ("xhci: no switching back on non-ULT Haswell") Current understanding is that LynxPoint-LP (Haswell ULT) machines need the SPURIOUS_WAKEUP quirk, otherwise they will restart, and plain Lynxpoint (Haswell) machines may _not_ have the quirk set otherwise they again will restart. Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Oliver Neukum <oneukum@suse.com> [Added more history to commit message -Mathias] Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit fd7cd061adcf5f7503515ba52b6a724642a839c8 upstream.

We received several reports of systems rebooting and powering on
after an attempted shutdown. Testing showed that setting
XHCI_SPURIOUS_WAKEUP quirk in addition to the XHCI_SPURIOUS_REBOOT
quirk allowed the system to shutdown as expected for LynxPoint-LP
xHCI controllers. Set the quirk back.

Note that the quirk was originally introduced for LynxPoint and
LynxPoint-LP just for this same reason. See:

commit 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell")

It was later limited to only concern HP machines as it caused
regression on some machines, see both bug and commit:

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66171
commit 6962d914f317 ("xhci: Limit the spurious wakeup fix only to HP machines")

Later it was discovered that the powering on after shutdown
was limited to LynxPoint-LP (Haswell-ULT) and that some non-LP HP
machine suffered from spontaneous resume from S3 (which should
not be related to the SPURIOUS_WAKEUP quirk at all). An attempt
to fix this then removed the SPURIOUS_WAKEUP flag usage completely.

commit b45abacde3d5 ("xhci: no switching back on non-ULT Haswell")

Current understanding is that LynxPoint-LP (Haswell ULT) machines
need the SPURIOUS_WAKEUP quirk, otherwise they will restart, and
plain Lynxpoint (Haswell) machines may _not_ have the quirk
set otherwise they again will restart.

Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Oliver Neukum <oneukum@suse.com>
[Added more history to commit message -Mathias]
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
xhci: handle no ping response error properly 2016-04-27T10:55:28+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2015-10-12T08:30:12+00:00 720083a9e3257eee6efa05eae310d3250f5270a5 commit 3b4739b8951d650becbcd855d7d6f18ac98a9a85 upstream. If a host fails to wake up a isochronous SuperSpeed device from U1/U2 in time for a isoch transfer it will generate a "No ping response error" Host will then move to the next transfer descriptor. Handle this case in the same way as missed service errors, tag the current TD as skipped and handle it on the next transfer event. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 3b4739b8951d650becbcd855d7d6f18ac98a9a85 upstream.

If a host fails to wake up a isochronous SuperSpeed device from U1/U2
in time for a isoch transfer it will generate a "No ping response error"
Host will then move to the next transfer descriptor.

Handle this case in the same way as missed service errors, tag the
current TD as skipped and handle it on the next transfer event.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
usb: Add device quirk for Logitech PTZ cameras 2016-04-27T10:55:26+00:00 Vincent Palatin vpalatin@chromium.org 2015-10-01T21:10:22+00:00 d6706f05d3d4246d94fc126a3632072a4c8daef6 commit 72194739f54607bbf8cfded159627a2015381557 upstream. Add a device quirk for the Logitech PTZ Pro Camera and its sibling the ConferenceCam CC3000e Camera. This fixes the failed camera enumeration on some boot, particularly on machines with fast CPU. Tested by connecting a Logitech PTZ Pro Camera to a machine with a Haswell Core i7-4600U CPU @ 2.10GHz, and doing thousands of reboot cycles while recording the kernel logs and taking camera picture after each boot. Before the patch, more than 7% of the boots show some enumeration transfer failures and in a few of them, the kernel is giving up before actually enumerating the webcam. After the patch, the enumeration has been correct on every reboot. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 72194739f54607bbf8cfded159627a2015381557 upstream.

Add a device quirk for the Logitech PTZ Pro Camera and its sibling the
ConferenceCam CC3000e Camera.
This fixes the failed camera enumeration on some boot, particularly on
machines with fast CPU.

Tested by connecting a Logitech PTZ Pro Camera to a machine with a
Haswell Core i7-4600U CPU @ 2.10GHz, and doing thousands of reboot cycles
while recording the kernel logs and taking camera picture after each boot.
Before the patch, more than 7% of the boots show some enumeration transfer
failures and in a few of them, the kernel is giving up before actually
enumerating the webcam. After the patch, the enumeration has been correct
on every reboot.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
USB: Add reset-resume quirk for two Plantronics usb headphones. 2016-04-27T10:55:25+00:00 Yao-Wen Mao yaowen@google.com 2015-08-31T06:24:09+00:00 18316131ccdd4cba57f2f96239143e2a8754ece2 commit 8484bf2981b3d006426ac052a3642c9ce1d8d980 upstream. These two headphones need a reset-resume quirk to properly resume to original volume level. Signed-off-by: Yao-Wen Mao <yaowen@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 8484bf2981b3d006426ac052a3642c9ce1d8d980 upstream.

These two headphones need a reset-resume quirk to properly resume to
original volume level.

Signed-off-by: Yao-Wen Mao <yaowen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
xhci: change xhci 1.0 only restrictions to support xhci 1.1 2016-04-27T10:55:24+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2015-09-21T14:46:16+00:00 276a6c94ded4ad29a4f86381c5f80b840b8a7030 commit dca7794539eff04b786fb6907186989e5eaaa9c2 upstream. Some changes between xhci 0.96 and xhci 1.0 specifications forced us to check the hci version in code, some of these checks were implemented as hci_version == 1.0, which will not work with new xhci 1.1 controllers. xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these checks to hci_version >= 1.0 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit dca7794539eff04b786fb6907186989e5eaaa9c2 upstream.

Some changes between xhci 0.96 and xhci 1.0 specifications forced us to
check the hci version in code, some of these checks were implemented as
hci_version == 1.0, which will not work with new xhci 1.1 controllers.

xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these
checks to hci_version >= 1.0

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
usb: xhci: Clear XHCI_STATE_DYING on start 2016-04-27T10:55:23+00:00 Roger Quadros rogerq@ti.com 2015-09-21T14:46:13+00:00 fa8600fa40e5ca152b8ece604579535b4296145f commit e5bfeab0ad515b4f6df39fe716603e9dc6d3dfd0 upstream. For whatever reason if XHCI died in the previous instant then it will never recover on the next xhci_start unless we clear the DYING flag. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit e5bfeab0ad515b4f6df39fe716603e9dc6d3dfd0 upstream.

For whatever reason if XHCI died in the previous instant
then it will never recover on the next xhci_start unless we
clear the DYING flag.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
xhci: give command abortion one more chance before killing xhci 2016-04-27T10:55:23+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2015-09-21T14:46:10+00:00 63a2bddd9e9d605149860e819cca40f79835eeed commit a6809ffd1687b3a8c192960e69add559b9d32649 upstream. We want to give the command abortion an additional try to stop the command ring before we completely hose xhci. Tested-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [lizf: Backported to 3.4: call handshake() instead of xhci_handshake()] Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit a6809ffd1687b3a8c192960e69add559b9d32649 upstream.

We want to give the command abortion an additional try to stop
the command ring before we completely hose xhci.

Tested-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[lizf: Backported to 3.4: call handshake() instead of xhci_handshake()]
Signed-off-by: Zefan Li <lizefan@huawei.com>
usb: Use the USB_SS_MULT() macro to get the burst multiplier. 2016-04-27T10:55:23+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2015-09-21T14:46:09+00:00 40dba0fdd43511ea6f24b432c39edb39479eff59 commit ff30cbc8da425754e8ab96904db1d295bd034f27 upstream. Bits 1:0 of the bmAttributes are used for the burst multiplier. The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7 into use. Use the existing USB_SS_MULT() macro instead to make sure the mult value and hence max packet calculations are correct for USB3.1 devices. Note that burst multiplier in bmAttributes is zero based and that the USB_SS_MULT() macro adds one. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit ff30cbc8da425754e8ab96904db1d295bd034f27 upstream.

Bits 1:0 of the bmAttributes are used for the burst multiplier.
The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7
into use.

Use the existing USB_SS_MULT() macro instead to make sure the mult value
and hence max packet calculations are correct for USB3.1 devices.

Note that burst multiplier in bmAttributes is zero based and that
the USB_SS_MULT() macro adds one.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
USB: ftdi_sio: Added custom PID for CustomWare products 2016-04-27T10:55:15+00:00 Matthijs Kooijman matthijs@stdin.nl 2015-08-18T08:33:56+00:00 f150995233209f9bf6364196f3e21cbe3dae454e commit 1fb8dc36384ae1140ee6ccc470de74397606a9d5 upstream. CustomWare uses the FTDI VID with custom PIDs for their ShipModul MiniPlex products. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 1fb8dc36384ae1140ee6ccc470de74397606a9d5 upstream.

CustomWare uses the FTDI VID with custom PIDs for their ShipModul MiniPlex
products.

Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>