linux-stable.git/drivers/usb, branch v3.2.53 Linux kernel stable tree usb: serial: option: blacklist Olivetti Olicard200 2013-11-28T14:02:04+00:00 Enrico Mioso mrkiko.rs@gmail.com 2013-10-15T13:06:47+00:00 affb0bf19afa81cf004c67e357a33a9693e9ff3e commit fd8573f5828873343903215f203f14dc82de397c upstream. Interface 6 of this device speaks QMI as per tests done by us. Credits go to Antonella for providing the hardware. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Antonella Pellizzari <anto.pellizzari83@gmail.com> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit fd8573f5828873343903215f203f14dc82de397c upstream.

Interface 6 of this device speaks QMI as per tests done by us.
Credits go to Antonella for providing the hardware.

Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Antonella Pellizzari <anto.pellizzari83@gmail.com>
Tested-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: quirks: add touchscreen that is dazzeled by remote wakeup 2013-11-28T14:02:04+00:00 Oliver Neukum oneukum@suse.de 2013-10-16T10:26:07+00:00 b4634b793e79242f151654edef8510e28f4d0d74 commit 614ced91fc6fbb5a1cdd12f0f1b6c9197d9f1350 upstream. The device descriptors are messed up after remote wakeup Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 614ced91fc6fbb5a1cdd12f0f1b6c9197d9f1350 upstream.

The device descriptors are messed up after remote wakeup

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: quirks.c: add one device that cannot deal with suspension 2013-11-28T14:02:04+00:00 Oliver Neukum oneukum@suse.de 2013-10-14T14:22:40+00:00 6c76c2d92d331a029c88355d676cc68982c236d1 commit 4294bca7b423d1a5aa24307e3d112a04075e3763 upstream. The device is not responsive when resumed, unless it is reset. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 4294bca7b423d1a5aa24307e3d112a04075e3763 upstream.

The device is not responsive when resumed, unless it is reset.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: serial: option: add support for Inovia SEW858 device 2013-11-28T14:02:03+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2013-10-06T01:14:18+00:00 135528ae1e8b39dde4590b35138e5bdaaaf7b34b commit f4c19b8e165cff1a6607c21f8809441d61cab7ec upstream. This patch adds the device id for the Inovia SEW858 device to the option driver. Reported-by: Pavel Parkhomenko <ra85551@gmail.com> Tested-by: Pavel Parkhomenko <ra85551@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit f4c19b8e165cff1a6607c21f8809441d61cab7ec upstream.

This patch adds the device id for the Inovia SEW858 device to the option driver.

Reported-by: Pavel Parkhomenko <ra85551@gmail.com>
Tested-by: Pavel Parkhomenko <ra85551@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: support new huawei devices in option.c 2013-11-28T14:02:03+00:00 Fangxiaozhi (Franko) fangxiaozhi@huawei.com 2013-10-11T03:48:21+00:00 d08ec28ed82cd96b717cff22dabcd7011751d375 commit d544db293a44a2a3b09feab7dbd59668b692de71 upstream. Add new supporting declarations to option.c, to support Huawei new devices with new bInterfaceSubClass value. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit d544db293a44a2a3b09feab7dbd59668b692de71 upstream.

Add new supporting declarations to option.c, to support Huawei new
devices with new bInterfaceSubClass value.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: Fix spurious wakeups after S5 on Haswell 2013-11-28T14:02:02+00:00 Takashi Iwai tiwai@suse.de 2013-09-12T06:11:06+00:00 21f58875dda7b00228bba716d48e3e2eafb210f9 commit 638298dc66ea36623dbc2757a24fc2c4ab41b016 upstream. Haswell LynxPoint and LynxPoint-LP with the recent Intel BIOS show mysterious wakeups after shutdown occasionally. After discussing with BIOS engineers, they explained that the new BIOS expects that the wakeup sources are cleared and set to D3 for all wakeup devices when the system is going to sleep or power off, but the current xhci driver doesn't do this properly (partly intentionally). This patch introduces a new quirk, XHCI_SPURIOUS_WAKEUP, for fixing the spurious wakeups at S5 by calling xhci_reset() in the xhci shutdown ops as done in xhci_stop(), and setting the device to PCI D3 at shutdown and remove ops. The PCI D3 call is based on the initial fix patch by Oliver Neukum. [Note: Sarah changed the quirk name from XHCI_HSW_SPURIOUS_WAKEUP to XHCI_SPURIOUS_WAKEUP, since none of the other quirks have system names in them. Sarah also fixed a collision with a quirk submitted around the same time, by changing the xhci->quirks bit from 17 to 18.] This patch should be backported to kernels as old as 3.0, that contain the commit 1c12443ab8eba71a658fae4572147e56d1f84f66 "xhci: Add Lynx Point to list of Intel switchable hosts." Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 638298dc66ea36623dbc2757a24fc2c4ab41b016 upstream.

Haswell LynxPoint and LynxPoint-LP with the recent Intel BIOS show
mysterious wakeups after shutdown occasionally.  After discussing with
BIOS engineers, they explained that the new BIOS expects that the
wakeup sources are cleared and set to D3 for all wakeup devices when
the system is going to sleep or power off, but the current xhci driver
doesn't do this properly (partly intentionally).

This patch introduces a new quirk, XHCI_SPURIOUS_WAKEUP, for
fixing the spurious wakeups at S5 by calling xhci_reset() in the xhci
shutdown ops as done in xhci_stop(), and setting the device to PCI D3
at shutdown and remove ops.

The PCI D3 call is based on the initial fix patch by Oliver Neukum.

[Note: Sarah changed the quirk name from XHCI_HSW_SPURIOUS_WAKEUP to
XHCI_SPURIOUS_WAKEUP, since none of the other quirks have system names
in them.  Sarah also fixed a collision with a quirk submitted around the
same time, by changing the xhci->quirks bit from 17 to 18.]

This patch should be backported to kernels as old as 3.0, that
contain the commit 1c12443ab8eba71a658fae4572147e56d1f84f66 "xhci: Add
Lynx Point to list of Intel switchable hosts."

Cc: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: quirk for extra long delay for S4 2013-11-28T14:02:02+00:00 Oliver Neukum oneukum@suse.de 2013-09-30T13:50:54+00:00 3585a755cec3b70cb10e55ba4a25ae0dfe04c3a2 commit 455f58925247e8a1a1941e159f3636ad6ee4c90b upstream. It has been reported that this chipset really cannot sleep without this extraordinary delay. This patch should be backported, in order to ensure this host functions under stable kernels. The last quirk for Fresco Logic hosts (commit bba18e33f25072ebf70fd8f7f0cdbf8cdb59a746 "xhci: Extend Fresco Logic MSI quirk.") was backported to stable kernels as old as 2.6.36. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> [bwh: Backported to 3.2: - Adjust context - Use xhci_dbg() instead of xhci_dbg_trace()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 455f58925247e8a1a1941e159f3636ad6ee4c90b upstream.

It has been reported that this chipset really cannot
sleep without this extraordinary delay.

This patch should be backported, in order to ensure this host functions
under stable kernels.  The last quirk for Fresco Logic hosts (commit
bba18e33f25072ebf70fd8f7f0cdbf8cdb59a746 "xhci: Extend Fresco Logic MSI
quirk.") was backported to stable kernels as old as 2.6.36.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
[bwh: Backported to 3.2:
 - Adjust context
 - Use xhci_dbg() instead of xhci_dbg_trace()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: Don't enable/disable RWE on bus suspend/resume. 2013-11-28T14:02:02+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-08-05T20:36:00+00:00 dc77997de6b3cbe994ba052653ec8e292af5b627 commit f217c980ca980e3a645b7485ea5eae9a747f4945 upstream. The RWE bit of the USB 2.0 PORTPMSC register is supposed to enable remote wakeup for devices in the lower power link state L1. It has nothing to do with the device suspend remote wakeup from L2. The RWE bit is designed to be set once (when USB 2.0 LPM is enabled for the port) and cleared only when USB 2.0 LPM is disabled for the port. The xHCI bus suspend method was setting the RWE bit erroneously, and the bus resume method was clearing it. The xHCI 1.0 specification with errata up to Aug 12, 2012 says in section 4.23.5.1.1.1 "Hardware Controlled LPM": "While Hardware USB2 LPM is enabled, software shall not modify the HIRDBESL or RWE fields of the USB2 PORTPMSC register..." If we have previously enabled USB 2.0 LPM for a device, that means when the USB 2.0 bus is resumed, we violate the xHCI specification by clearing RWE. It also means that after a bus resume, the host would think remote wakeup is disabled from L1 for ports with USB 2.0 Link PM enabled, which is not what we want. This patch should be backported to kernels as old as 3.2, that contain the commit 65580b4321eb36f16ae8b5987bfa1bb948fc5112 "xHCI: set USB2 hardware LPM". That was the first kernel that supported USB 2.0 Link PM. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> [bwh: Backported to 3.2: deleted code was cosmetically different] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit f217c980ca980e3a645b7485ea5eae9a747f4945 upstream.

The RWE bit of the USB 2.0 PORTPMSC register is supposed to enable
remote wakeup for devices in the lower power link state L1.  It has
nothing to do with the device suspend remote wakeup from L2.  The RWE
bit is designed to be set once (when USB 2.0 LPM is enabled for the
port) and cleared only when USB 2.0 LPM is disabled for the port.

The xHCI bus suspend method was setting the RWE bit erroneously, and the
bus resume method was clearing it.  The xHCI 1.0 specification with
errata up to Aug 12, 2012 says in section 4.23.5.1.1.1 "Hardware
Controlled LPM":

"While Hardware USB2 LPM is enabled, software shall not modify the
HIRDBESL or RWE fields of the USB2 PORTPMSC register..."

If we have previously enabled USB 2.0 LPM for a device, that means when
the USB 2.0 bus is resumed, we violate the xHCI specification by
clearing RWE.  It also means that after a bus resume, the host would
think remote wakeup is disabled from L1 for ports with USB 2.0 Link PM
enabled, which is not what we want.

This patch should be backported to kernels as old as 3.2, that
contain the commit 65580b4321eb36f16ae8b5987bfa1bb948fc5112 "xHCI: set
USB2 hardware LPM".  That was the first kernel that supported USB 2.0
Link PM.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
[bwh: Backported to 3.2: deleted code was cosmetically different]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: Fix race between ep halt and URB cancellation 2013-10-26T20:06:13+00:00 Florian Wolter wolly84@web.de 2013-08-14T08:33:16+00:00 47fa3c9b8352d4f403118b01f8a97fff1353c30b commit 526867c3ca0caa2e3e846cb993b0f961c33c2abb upstream. The halted state of a endpoint cannot be cleared over CLEAR_HALT from a user process, because the stopped_td variable was overwritten in the handle_stopped_endpoint() function. So the xhci_endpoint_reset() function will refuse the reset and communication with device can not run over this endpoint. https://bugzilla.kernel.org/show_bug.cgi?id=60699 Signed-off-by: Florian Wolter <wolly84@web.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 526867c3ca0caa2e3e846cb993b0f961c33c2abb upstream.

The halted state of a endpoint cannot be cleared over CLEAR_HALT from a
user process, because the stopped_td variable was overwritten in the
handle_stopped_endpoint() function. So the xhci_endpoint_reset() function will
refuse the reset and communication with device can not run over this endpoint.
https://bugzilla.kernel.org/show_bug.cgi?id=60699

Signed-off-by: Florian Wolter <wolly84@web.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: core: don't try to reset_device() a port that got just disconnected 2013-10-26T20:06:10+00:00 Julius Werner jwerner@chromium.org 2013-07-31T02:51:20+00:00 38e57772a96d382cc6783f26cb152702f686b25f commit 481f2d4f89f87a0baa26147f323380e31cfa7c44 upstream. The USB hub driver's event handler contains a check to catch SuperSpeed devices that transitioned into the SS.Inactive state and tries to fix them with a reset. It decides whether to do a plain hub port reset or call the usb_reset_device() function based on whether there was a device attached to the port. However, there are device/hub combinations (found with a JetFlash Transcend mass storage stick (8564:1000) on the root hub of an Intel LynxPoint PCH) which can transition to the SS.Inactive state on disconnect (and stay there long enough for the host to notice). In this case, above-mentioned reset check will call usb_reset_device() on the stale device data structure. The kernel will send pointless LPM control messages to the no longer connected device address and can even cause several 5 second khubd stalls on some (buggy?) host controllers, before finally accepting the device's fate amongst a flurry of error messages. This patch makes the choice of reset dependent on the port status that has just been read from the hub in addition to the existence of an in-kernel data structure for the device, and only proceeds with the more extensive reset if both are valid. Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 481f2d4f89f87a0baa26147f323380e31cfa7c44 upstream.

The USB hub driver's event handler contains a check to catch SuperSpeed
devices that transitioned into the SS.Inactive state and tries to fix
them with a reset. It decides whether to do a plain hub port reset or
call the usb_reset_device() function based on whether there was a device
attached to the port.

However, there are device/hub combinations (found with a JetFlash
Transcend mass storage stick (8564:1000) on the root hub of an Intel
LynxPoint PCH) which can transition to the SS.Inactive state on
disconnect (and stay there long enough for the host to notice). In this
case, above-mentioned reset check will call usb_reset_device() on the
stale device data structure. The kernel will send pointless LPM control
messages to the no longer connected device address and can even cause
several 5 second khubd stalls on some (buggy?) host controllers, before
finally accepting the device's fate amongst a flurry of error messages.

This patch makes the choice of reset dependent on the port status that
has just been read from the hub in addition to the existence of an
in-kernel data structure for the device, and only proceeds with the more
extensive reset if both are valid.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>