linux-stable.git/drivers/usb, branch v3.18.92

uas: ignore UAS for Norelsys NS1068(X) chips

2018-01-17T08:29:31+00:00

commit 928afc85270753657b5543e052cc270c279a3fe9 upstream.

The UAS mode of Norelsys NS1068(X) is reported to fail to work on
several platforms with the following error message:

xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 1 ep 8
xhci-hcd xhci-hcd.0.auto: @00000000bf04a400 00000000 00000000 1b000000 01098001

And when trying to mount a partition on the disk the disk will
disconnect from the USB controller, then after re-connecting the device
will be offlined and not working at all.

Falling back to USB mass storage can solve this problem, so ignore UAS
function of this chip.

Signed-off-by: Icenowy Zheng 
Acked-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

usbip: remove kernel addresses from usb device and urb debug msgs

2018-01-17T08:29:31+00:00

commit e1346fd87c71a1f61de1fe476ec8df1425ac931c upstream.

usbip_dump_usb_device() and usbip_dump_urb() print kernel addresses.
Remove kernel addresses from usb device and urb debug msgs and improve
the message content.

Instead of printing parent device and bus addresses, print parent device
and bus names.

Signed-off-by: Shuah Khan 
Signed-off-by: Greg Kroah-Hartman

USB: fix usbmon BUG trigger

2018-01-17T08:29:31+00:00

commit 46eb14a6e1585d99c1b9f58d0e7389082a5f466b upstream.

Automated tests triggered this by opening usbmon and accessing the
mmap while simultaneously resizing the buffers. This bug was with
us since 2006, because typically applications only size the buffers
once and thus avoid racing. Reported by Kirill A. Shutemov.

Reported-by: 
Signed-off-by: Pete Zaitcev 
Signed-off-by: Greg Kroah-Hartman

usb: misc: usb3503: make sure reset is low for at least 100us

2018-01-17T08:29:31+00:00

commit b8626f1dc29d3eee444bfaa92146ec7b291ef41c upstream.

When using a GPIO which is high by default, and initialize the
driver in USB Hub mode, initialization fails with:
  [  111.757794] usb3503 0-0008: SP_ILOCK failed (-5)

The reason seems to be that the chip is not properly reset.
Probe does initialize reset low, however some lines later the
code already set it back high, which is not long enouth.

Make sure reset is asserted for at least 100us by inserting a
delay after initializing the reset pin during probe.

Signed-off-by: Stefan Agner 
Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: add new device ID ELV ALC 8xxx

2018-01-17T08:29:31+00:00

commit d14ac576d10f865970bb1324d337e5e24d79aaf4 upstream.

This adds the ELV ALC 8xxx Battery Charging device
to the list of USB IDs of drivers/usb/serial/cp210x.c

Signed-off-by: Christian Holl 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ

2018-01-17T08:29:31+00:00

commit 4307413256ac1e09b8f53e8715af3df9e49beec3 upstream.

Add IDs for the OneTouch Verio IQ that comes with an embedded
USB-to-serial converter.

Signed-off-by: Diego Elio Pettenò 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201

2018-01-02T19:04:59+00:00

commit da99706689481717998d1d48edd389f339eea979 upstream.

When plugging in a USB webcam I see the following message:
xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs
XHCI_TRUST_TX_LENGTH quirk?
handle_tx_event: 913 callbacks suppressed

All is quiet again with this patch (and I've done a fair but of soak
testing with the camera since).

Signed-off-by: Daniel Thompson 
Acked-by: Ard Biesheuvel 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

usb: add RESET_RESUME for ELSA MicroLink 56K

2018-01-02T19:04:59+00:00

commit b9096d9f15c142574ebebe8fbb137012bb9d99c2 upstream.

This modem needs this quirk to operate. It produces timeouts when
resumed without reset.

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

usb: Add device quirk for Logitech HD Pro Webcam C925e

2018-01-02T19:04:59+00:00

commit 7f038d256c723dd390d2fca942919573995f4cfd upstream.

Commit e0429362ab15
("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e")
introduced quirk to workaround an issue with some Logitech webcams.

There is one more model that has the same issue - C925e, so applying
the same quirk as well.

See aforementioned commit message for detailed explanation of the problem.

Signed-off-by: Dmitry Fleytman 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add support for Telit ME910 PID 0x1101

2018-01-02T19:04:59+00:00

commit 08933099e6404f588f81c2050bfec7313e06eeaf upstream.

This patch adds support for PID 0x1101 of Telit ME910.

Signed-off-by: Daniele Palmas 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman