linux-stable.git/drivers/usb, branch v3.18.9 Linux kernel stable tree USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd) 2015-03-06T22:53:00+00:00 Alan Stern stern@rowland.harvard.edu 2015-01-29T20:05:04+00:00 4e5b83d8e80254b1ad0831e4ce1bcb64fbfd830c commit 074f9dd55f9cab1b82690ed7e44bcf38b9616ce0 upstream. Currently the USB stack assumes that all host controller drivers are capable of receiving wakeup requests from downstream devices. However, this isn't true for the isp1760-hcd driver, which means that it isn't safe to do a runtime suspend of any device attached to a root-hub port if the device requires wakeup. This patch adds a "cant_recv_wakeups" flag to the usb_hcd structure and sets the flag in isp1760-hcd. The core is modified to prevent a direct child of the root hub from being put into runtime suspend with wakeup enabled if the flag is set. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 074f9dd55f9cab1b82690ed7e44bcf38b9616ce0 upstream.

Currently the USB stack assumes that all host controller drivers are
capable of receiving wakeup requests from downstream devices.
However, this isn't true for the isp1760-hcd driver, which means that
it isn't safe to do a runtime suspend of any device attached to a
root-hub port if the device requires wakeup.

This patch adds a "cant_recv_wakeups" flag to the usb_hcd structure
and sets the flag in isp1760-hcd.  The core is modified to prevent a
direct child of the root hub from being put into runtime suspend with
wakeup enabled if the flag is set.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: don't cancel queued resets when unbinding drivers 2015-03-06T22:53:00+00:00 Alan Stern stern@rowland.harvard.edu 2015-01-21T19:02:43+00:00 76730c9fb39242f4f46f36ed07024deeaf29cedd commit 524134d422316a59d5464ccbc12036bbe90c5563 upstream. The USB stack provides a mechanism for drivers to request an asynchronous device reset (usb_queue_reset_device()). The mechanism uses a work item (reset_ws) embedded in the usb_interface structure used by the driver, and the reset is carried out by a work queue routine. The asynchronous reset can race with driver unbinding. When this happens, we try to cancel the queued reset before unbinding the driver, on the theory that the driver won't care about any resets once it is unbound. However, thanks to the fact that lockdep now tracks work queue accesses, this can provoke a lockdep warning in situations where the device reset causes another interface's driver to be unbound; see http://marc.info/?l=linux-usb&m=141893165203776&w=2 for an example. The reason is that the work routine for reset_ws in one interface calls cancel_queued_work() for the reset_ws in another interface. Lockdep thinks this might lead to a work routine trying to cancel itself. The simplest solution is not to cancel queued resets when unbinding drivers. This means we now need to acquire a reference to the usb_interface when queuing a reset_ws work item and to drop the reference when the work routine finishes. We also need to make sure that the usb_interface structure doesn't outlive its parent usb_device; this means acquiring and dropping a reference when the interface is created and destroyed. In addition, cancelling a queued reset can fail (if the device is in the middle of an earlier reset), and this can cause usb_reset_device() to try to rebind an interface that has been deallocated (see http://marc.info/?l=linux-usb&m=142175717016628&w=2 for details). Acquiring the extra references prevents this failure. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Reported-by: Olivier Sobrie <olivier@sobrie.be> Tested-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 524134d422316a59d5464ccbc12036bbe90c5563 upstream.

The USB stack provides a mechanism for drivers to request an
asynchronous device reset (usb_queue_reset_device()).  The mechanism
uses a work item (reset_ws) embedded in the usb_interface structure
used by the driver, and the reset is carried out by a work queue
routine.

The asynchronous reset can race with driver unbinding.  When this
happens, we try to cancel the queued reset before unbinding the
driver, on the theory that the driver won't care about any resets once
it is unbound.

However, thanks to the fact that lockdep now tracks work queue
accesses, this can provoke a lockdep warning in situations where the
device reset causes another interface's driver to be unbound; see

	http://marc.info/?l=linux-usb&m=141893165203776&w=2

for an example.  The reason is that the work routine for reset_ws in
one interface calls cancel_queued_work() for the reset_ws in another
interface.  Lockdep thinks this might lead to a work routine trying to
cancel itself.  The simplest solution is not to cancel queued resets
when unbinding drivers.

This means we now need to acquire a reference to the usb_interface
when queuing a reset_ws work item and to drop the reference when the
work routine finishes.  We also need to make sure that the
usb_interface structure doesn't outlive its parent usb_device; this
means acquiring and dropping a reference when the interface is created
and destroyed.

In addition, cancelling a queued reset can fail (if the device is in
the middle of an earlier reset), and this can cause usb_reset_device()
to try to rebind an interface that has been deallocated (see
http://marc.info/?l=linux-usb&m=142175717016628&w=2 for details).
Acquiring the extra references prevents this failure.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk>
Reported-by: Olivier Sobrie <olivier@sobrie.be>
Tested-by: Olivier Sobrie <olivier@sobrie.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: core: buffer: smallest buffer should start at ARCH_DMA_MINALIGN 2015-03-06T22:53:00+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2014-12-05T14:13:54+00:00 482b4b71325978f4ed8af471fddfaa6325b11f80 commit 5efd2ea8c9f4f12916ffc8ba636792ce052f6911 upstream. the following error pops up during "testusb -a -t 10" | musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128, f134e000/be842000 (bad dma) hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in hcd_buffer_alloc() returning memory which is 32 bytes aligned and it might by identified by buffer_offset() as another buffer. This means the buffer which is on a 32 byte boundary will not get freed, instead it tries to free another buffer with the error message. This patch fixes the issue by creating the smallest DMA buffer with the size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is smaller). This might be 32, 64 or even 128 bytes. The next three pools will have the size 128, 512 and 2048. In case the smallest pool is 128 bytes then we have only three pools instead of four (and zero the first entry in the array). The last pool size is always 2048 bytes which is the assumed PAGE_SIZE / 2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where we would end up with 8KiB buffer in case we have 16KiB pages. Instead I think it makes sense to have a common size(s) and extend them if there is need to. There is a BUILD_BUG_ON() now in case someone has a minalign of more than 128 bytes. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5efd2ea8c9f4f12916ffc8ba636792ce052f6911 upstream.

the following error pops up during "testusb -a -t 10"
| musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128,	f134e000/be842000 (bad dma)
hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of
size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in
hcd_buffer_alloc() returning memory which is 32 bytes aligned and it
might by identified by buffer_offset() as another buffer. This means the
buffer which is on a 32 byte boundary will not get freed, instead it
tries to free another buffer with the error message.

This patch fixes the issue by creating the smallest DMA buffer with the
size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is
smaller). This might be 32, 64 or even 128 bytes. The next three pools
will have the size 128, 512 and 2048.
In case the smallest pool is 128 bytes then we have only three pools
instead of four (and zero the first entry in the array).
The last pool size is always 2048 bytes which is the assumed PAGE_SIZE /
2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where
we would end up with 8KiB buffer in case we have 16KiB pages.
Instead I think it makes sense to have a common size(s) and extend them
if there is need to.
There is a BUILD_BUG_ON() now in case someone has a minalign of more than
128 bytes.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: fix use-after-free bug in usb_hcd_unlink_urb() 2015-03-06T22:53:00+00:00 Alan Stern stern@rowland.harvard.edu 2015-01-30T17:58:26+00:00 7a0c5e127978f870250579a7dc46293a0dd249ea commit c99197902da284b4b723451c1471c45b18537cde upstream. The usb_hcd_unlink_urb() routine in hcd.c contains two possible use-after-free errors. The dev_dbg() statement at the end of the routine dereferences urb and urb->dev even though both structures may have been deallocated. This patch fixes the problem by storing urb->dev in a local variable (avoiding the dereference of urb) and moving the dev_dbg() up before the usb_put_dev() call. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c99197902da284b4b723451c1471c45b18537cde upstream.

The usb_hcd_unlink_urb() routine in hcd.c contains two possible
use-after-free errors.  The dev_dbg() statement at the end of the
routine dereferences urb and urb->dev even though both structures may
have been deallocated.

This patch fixes the problem by storing urb->dev in a local variable
(avoiding the dereference of urb) and moving the dev_dbg() up before
the usb_put_dev() call.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cp210x: add ID for RUGGEDCOM USB Serial Console 2015-03-06T22:53:00+00:00 Lennart Sorensen lsorense@csclub.uwaterloo.ca 2015-01-21T20:24:27+00:00 c865d81da776ebb95b8a5949141006665effbe81 commit a6f0331236fa75afba14bbcf6668d42cebb55c43 upstream. Added the USB serial console device ID for Siemens Ruggedcom devices which have a USB port for their serial console. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a6f0331236fa75afba14bbcf6668d42cebb55c43 upstream.

Added the USB serial console device ID for Siemens Ruggedcom devices
which have a USB port for their serial console.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uas: Add no-report-opcodes quirk for Simpletech devices with id 4971:8017 2015-02-06T06:36:04+00:00 Hans de Goede hdegoede@redhat.com 2015-01-12T12:34:33+00:00 f1764f870c6743fa2f308601e1003de58b35b931 commit 8a870880bd6f17b7ccef69a6432ab8df8775fcf6 upstream. Like some other uas devices these devices hang when a report-opcodes scsi command is send to them. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1124119 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8a870880bd6f17b7ccef69a6432ab8df8775fcf6 upstream.

Like some other uas devices these devices hang when a report-opcodes scsi
command is send to them.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1124119
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb-storage/SCSI: blacklist FUA on JMicron 152d:2566 USB-SATA controller 2015-02-06T06:36:04+00:00 Dmitry Nezhevenko dion@dion.org.ua 2015-01-12T17:13:01+00:00 6e340560ac33732816cef0c6b11ed04d1efb3839 commit bf5c4136fa5ce471bdbf4cf59a813e32755fd014 upstream. It looks like FUA support is broken on JMicron 152d:2566 bridge: [223159.885704] sd 7:0:0:0: [sdc] Write Protect is off [223159.885706] sd 7:0:0:0: [sdc] Mode Sense: 47 00 10 08 [223159.885942] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [223283.691677] sd 7:0:0:0: [sdc] [223283.691680] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [223283.691681] sd 7:0:0:0: [sdc] [223283.691682] Sense Key : Illegal Request [current] [223283.691684] sd 7:0:0:0: [sdc] [223283.691685] Add. Sense: Invalid field in cdb [223283.691686] sd 7:0:0:0: [sdc] CDB: [223283.691687] Write(10): 2a 08 15 d0 83 0d 00 00 01 00 [223283.691690] blk_update_request: critical target error, dev sdc, sector 2927892584 This patch adds blacklist flag so that sd will not use FUA Signed-off-by: Dmitry Nezhevenko <dion@dion.org.ua> Cc: Phil Dibowitz <phil@ipom.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bf5c4136fa5ce471bdbf4cf59a813e32755fd014 upstream.

It looks like FUA support is broken on JMicron 152d:2566 bridge:

[223159.885704] sd 7:0:0:0: [sdc] Write Protect is off
[223159.885706] sd 7:0:0:0: [sdc] Mode Sense: 47 00 10 08
[223159.885942] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA

[223283.691677] sd 7:0:0:0: [sdc]
[223283.691680] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[223283.691681] sd 7:0:0:0: [sdc]
[223283.691682] Sense Key : Illegal Request [current]
[223283.691684] sd 7:0:0:0: [sdc]
[223283.691685] Add. Sense: Invalid field in cdb
[223283.691686] sd 7:0:0:0: [sdc] CDB:
[223283.691687] Write(10): 2a 08 15 d0 83 0d 00 00 01 00
[223283.691690] blk_update_request: critical target error, dev sdc, sector 2927892584

This patch adds blacklist flag so that sd will not use FUA

Signed-off-by: Dmitry Nezhevenko <dion@dion.org.ua>
Cc: Phil Dibowitz <phil@ipom.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Add OTG PET device to TPL 2015-02-06T06:36:04+00:00 Macpaul Lin macpaul@gmail.com 2015-01-23T06:39:02+00:00 f97b23ddb479fe44f6f34dd55aa90cf0e8d6312a commit e5dff0e80463cc3fa236e898ef1491b40be70b19 upstream. OTG device shall support this device for allowing compliance automated testing. The modification is derived from Pavankumar and Vijayavardhans' previous work. Signed-off-by: Macpaul Lin <macpaul@gmail.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Vijayavardhan Vennapusa <vvreddy@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e5dff0e80463cc3fa236e898ef1491b40be70b19 upstream.

OTG device shall support this device for allowing compliance automated testing.
The modification is derived from Pavankumar and Vijayavardhans' previous work.

Signed-off-by: Macpaul Lin <macpaul@gmail.com>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: musb: stuff leak of struct usb_hcd 2015-01-27T16:29:43+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2014-12-11T17:14:18+00:00 81699fed3caad746f435824b3130c5c2e957557d commit 68693b8ea4e284c46bff919ac62bd9ccdfdbb6ba upstream. since the split of host+gadget mode in commit 74c2e9360058 ("usb: musb: factor out hcd initalization") we leak the usb_hcd struct. We call now musb_host_cleanup() which does basically usb_remove_hcd() and also sets the hcd variable to NULL. Doing so makes the finall call to musb_host_free() basically a nop and the usb_hcd remains around for ever without anowner. This patch drops that NULL assignment for that reason. Fixes: 74c2e9360058 ("usb: musb: factor out hcd initalization") Cc: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 68693b8ea4e284c46bff919ac62bd9ccdfdbb6ba upstream.

since the split of host+gadget mode in commit 74c2e9360058 ("usb: musb:
factor out hcd initalization") we leak the usb_hcd struct. We call now
musb_host_cleanup() which does basically usb_remove_hcd() and also sets
the hcd variable to NULL. Doing so makes the finall call to
musb_host_free() basically a nop and the usb_hcd remains around for ever
without anowner.
This patch drops that NULL assignment for that reason.

Fixes: 74c2e9360058 ("usb: musb: factor out hcd initalization")
Cc: Daniel Mack <zonque@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: EHCI: fix initialization bug in iso_stream_schedule() 2015-01-27T16:29:43+00:00 Alan Stern stern@rowland.harvard.edu 2014-12-04T15:21:56+00:00 99688ecfbc63e2aa90fab5e704c47c4fd6439197 commit 6d89252a998a695ecb0348fc2d717dc33d90cae9 upstream. Commit c3ee9b76aa93 (EHCI: improved logic for isochronous scheduling) introduced the idea of using ehci->last_iso_frame as the origin (or base) for the circular calculations involved in modifying the isochronous schedule. However, the new code it added used ehci->last_iso_frame before the value was properly initialized. This patch rectifies the mistake by moving the initialization lines earlier in iso_stream_schedule(). This fixes Bugzilla #72891. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: c3ee9b76aa93 Reported-by: Joe Bryant <tenminjoe@yahoo.com> Tested-by: Joe Bryant <tenminjoe@yahoo.com> Tested-by: Martin Long <martin@longhome.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6d89252a998a695ecb0348fc2d717dc33d90cae9 upstream.

Commit c3ee9b76aa93 (EHCI: improved logic for isochronous scheduling)
introduced the idea of using ehci->last_iso_frame as the origin (or
base) for the circular calculations involved in modifying the
isochronous schedule.  However, the new code it added used
ehci->last_iso_frame before the value was properly initialized.  This
patch rectifies the mistake by moving the initialization lines earlier
in iso_stream_schedule().

This fixes Bugzilla #72891.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: c3ee9b76aa93
Reported-by: Joe Bryant <tenminjoe@yahoo.com>
Tested-by: Joe Bryant <tenminjoe@yahoo.com>
Tested-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>