linux-stable.git/drivers/usb, branch v3.12.22 Linux kernel stable tree USB: Nokia 5300 should be treated as unusual dev 2014-06-06T10:38:21+00:00 Daniele Forsi dforsi@gmail.com 2014-04-28T15:09:11+00:00 d1dc82b867de4af7be4e345349a43147f41683a5 commit 6ed07d45d09bc2aa60e27b845543db9972e22a38 upstream. Signed-off-by: Daniele Forsi <dforsi@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 6ed07d45d09bc2aa60e27b845543db9972e22a38 upstream.

Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
USB: Nokia 305 should be treated as unusual dev 2014-06-06T10:38:20+00:00 Victor A. Santos victoraur.santos@gmail.com 2014-04-27T02:20:14+00:00 ddf580935a8ca64903aea17da7a323e02d3fbaa7 commit f0ef5d41792a46a1085dead9dfb0bdb2c574638e upstream. Signed-off-by: Victor A. Santos <victoraur.santos@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit f0ef5d41792a46a1085dead9dfb0bdb2c574638e upstream.

Signed-off-by: Victor A. Santos <victoraur.santos@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
usb: storage: shuttle_usbat: fix discs being detected twice 2014-06-06T10:38:20+00:00 Daniele Forsi dforsi@gmail.com 2014-04-29T09:44:03+00:00 c232a4a7d253f8771ebbc9e87a5782aab87b60cc commit df602c2d2358f02c6e49cffc5b49b9daa16db033 upstream. Even if the USB-to-ATAPI converter supported multiple LUNs, this driver would always detect the same physical device or media because it doesn't use srb->device->lun in any way. Tested with an Hewlett-Packard CD-Writer Plus 8200e. Signed-off-by: Daniele Forsi <dforsi@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit df602c2d2358f02c6e49cffc5b49b9daa16db033 upstream.

Even if the USB-to-ATAPI converter supported multiple LUNs, this
driver would always detect the same physical device or media because
it doesn't use srb->device->lun in any way.
Tested with an Hewlett-Packard CD-Writer Plus 8200e.

Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
USB: OHCI: fix problem with global suspend on ATI controllers 2014-06-06T10:38:20+00:00 Alan Stern stern@rowland.harvard.edu 2014-05-01T19:21:42+00:00 ccc5443b40dfe652e86edd421e2164179b5da959 commit c1db30a2a79eb59997b13b8cabf2a50bea9f04e1 upstream. Some OHCI controllers from ATI/AMD seem to have difficulty with "global" USB suspend, that is, suspending an entire USB bus without setting the suspend feature for each port connected to a device. When we try to resume the child devices, the controller gives timeout errors on the unsuspended ports, requiring resets, and can even cause ohci-hcd to hang; see http://marc.info/?l=linux-usb&m=139514332820398&w=2 and the following messages. This patch fixes the problem by adding a new quirk flag to ohci-hcd. The flag causes the ohci_rh_suspend() routine to suspend each unsuspended, enabled port before suspending the root hub. This effectively converts the "global" suspend to an ordinary root-hub suspend. There is no need to unsuspend these ports when the root hub is resumed, because the child devices will be resumed anyway in the course of a normal system resume ("global" suspend is never used for runtime PM). This patch should be applied to all stable kernels which include commit 0aa2832dd0d9 (USB: use "global suspend" for system sleep on USB-2 buses) or a backported version thereof. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Peter Münster <pmlists@free.fr> Tested-by: Peter Münster <pmlists@free.fr> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit c1db30a2a79eb59997b13b8cabf2a50bea9f04e1 upstream.

Some OHCI controllers from ATI/AMD seem to have difficulty with
"global" USB suspend, that is, suspending an entire USB bus without
setting the suspend feature for each port connected to a device.  When
we try to resume the child devices, the controller gives timeout
errors on the unsuspended ports, requiring resets, and can even cause
ohci-hcd to hang; see

	http://marc.info/?l=linux-usb&m=139514332820398&w=2

and the following messages.

This patch fixes the problem by adding a new quirk flag to ohci-hcd.
The flag causes the ohci_rh_suspend() routine to suspend each
unsuspended, enabled port before suspending the root hub.  This
effectively converts the "global" suspend to an ordinary root-hub
suspend.  There is no need to unsuspend these ports when the root hub
is resumed, because the child devices will be resumed anyway in the
course of a normal system resume ("global" suspend is never used for
runtime PM).

This patch should be applied to all stable kernels which include
commit 0aa2832dd0d9 (USB: use "global suspend" for system sleep on
USB-2 buses) or a backported version thereof.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Peter Münster <pmlists@free.fr>
Tested-by: Peter Münster <pmlists@free.fr>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
usb: gadget: at91-udc: fix irq and iomem resource retrieval 2014-06-06T10:38:19+00:00 Jean-Jacques Hiblot jjhiblot@traphandler.com 2014-03-12T16:30:08+00:00 4999a062177c37f7ea1a21c45720cb36d3dbe8cf commit 886c7c426d465732ec9d1b2bbdda5642fc2e7e05 upstream. When using dt resources retrieval (interrupts and reg properties) there is no predefined order for these resources in the platform dev resource table. Also don't expect the number of resource to be always 2. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Acked-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 886c7c426d465732ec9d1b2bbdda5642fc2e7e05 upstream.

When using dt resources retrieval (interrupts and reg properties) there is
no predefined order for these resources in the platform dev resource
table. Also don't expect the number of resource to be always 2.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
fsl-usb: do not test for PHY_CLK_VALID bit on controller version 1.6 2014-06-06T10:38:19+00:00 Nikita Yushchenko nyushchenko@dev.rtsoft.ru 2014-04-28T15:23:44+00:00 9c7d0b459c3d169fd4fbe2f831444c1669cef8c2 commit d183c81929beeba842b74422f754446ef2b8b49c upstream. Per reference manuals of Freescale P1020 and P2020 SoCs, USB controller present in these SoCs has bit 17 of USBx_CONTROL register marked as Reserved - there is no PHY_CLK_VALID bit there. Testing for this bit in ehci_fsl_setup_phy() behaves differently on two P1020RDB boards available here - on one board test passes and fsl-usb init succeeds, but on other board test fails, causing fsl-usb init to fail. This patch changes ehci_fsl_setup_phy() not to test PHY_CLK_VALID on controller version 1.6 that (per manual) does not have this bit. Signed-off-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit d183c81929beeba842b74422f754446ef2b8b49c upstream.

Per reference manuals of Freescale P1020 and P2020 SoCs, USB controller
present in these SoCs has bit 17 of USBx_CONTROL register marked as
Reserved - there is no PHY_CLK_VALID bit there.

Testing for this bit in ehci_fsl_setup_phy() behaves differently on two
P1020RDB boards available here - on one board test passes and fsl-usb
init succeeds, but on other board test fails, causing fsl-usb init to
fail.

This patch changes ehci_fsl_setup_phy() not to test PHY_CLK_VALID on
controller version 1.6 that (per manual) does not have this bit.

Signed-off-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
usb: qcserial: add a number of Dell devices 2014-06-04T15:00:28+00:00 Bjørn Mork bjorn@mork.no 2014-04-27T14:47:42+00:00 5b6e78d1f9e2d9e865c522722b8d54773c11efbe commit 4d7c0136a54f62501f8a34c4d08a5e0258d3d3ca upstream. Dan writes: "The Dell drivers use the same configuration for PIDs: 81A2: Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card 81A3: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card 81A4: Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card 81A8: Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card 81A9: Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card These devices are all clearly Sierra devices, but are also definitely Gobi-based. The A8 might be the MC7700/7710 and A9 is likely a MC7750. >From DellGobi5kSetup.exe from the Dell drivers: usbif0: serial/firmware loader? usbif2: nmea usbif3: modem/ppp usbif8: net/QMI" Cc: <stable@vger.kernel.org> Reported-by: AceLan Kao <acelan.kao@canonical.com> Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 4d7c0136a54f62501f8a34c4d08a5e0258d3d3ca upstream.

Dan writes:

"The Dell drivers use the same configuration for PIDs:

81A2: Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card
81A3: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card
81A4: Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card
81A8: Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card
81A9: Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card

These devices are all clearly Sierra devices, but are also definitely
Gobi-based.  The A8 might be the MC7700/7710 and A9 is likely a MC7750.

>From DellGobi5kSetup.exe from the Dell drivers:

usbif0: serial/firmware loader?
usbif2: nmea
usbif3: modem/ppp
usbif8: net/QMI"

Cc: <stable@vger.kernel.org>
Reported-by: AceLan Kao <acelan.kao@canonical.com>
Reported-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
usb: option: add and update a number of CMOTech devices 2014-05-29T09:38:23+00:00 Bjørn Mork bjorn@mork.no 2014-04-25T16:49:20+00:00 5ba3b1ee9254602486b6a62780d775461a490d4d commit 34f972d6156fe9eea2ab7bb418c71f9d1d5c8e7b upstream. A number of older CMOTech modems are based on Qualcomm chips. The blacklisted interfaces are QMI/wwan. Reported-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 34f972d6156fe9eea2ab7bb418c71f9d1d5c8e7b upstream.

A number of older CMOTech modems are based on Qualcomm
chips.  The blacklisted interfaces are QMI/wwan.

Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
usb: option: add Alcatel L800MA 2014-05-29T09:38:23+00:00 Bjørn Mork bjorn@mork.no 2014-04-25T16:49:19+00:00 42f2c7fb3ea7029dcde2387418b33538440c2a88 commit dd6b48ecec2ea7d15f28d5e5474388681899a5e1 upstream. Device interface layout: 0: ff/ff/ff - serial 1: ff/00/00 - serial AT+PPP 2: ff/ff/ff - QMI/wwan 3: 08/06/50 - storage Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit dd6b48ecec2ea7d15f28d5e5474388681899a5e1 upstream.

Device interface layout:
0: ff/ff/ff - serial
1: ff/00/00 - serial AT+PPP
2: ff/ff/ff - QMI/wwan
3: 08/06/50 - storage

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
usb: option: add Olivetti Olicard 500 2014-05-29T09:38:22+00:00 Bjørn Mork bjorn@mork.no 2014-04-25T16:49:18+00:00 225f31b02e53e533a21922f207ea92f0c1c14a26 commit 533b3994610f316e5cd61b56d0c4daa15c830f89 upstream. Device interface layout: 0: ff/ff/ff - serial 1: ff/ff/ff - serial AT+PPP 2: 08/06/50 - storage 3: ff/ff/ff - serial 4: ff/ff/ff - QMI/wwan Reported-by: Julio Araujo <julio.araujo@wllctel.com.br> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 533b3994610f316e5cd61b56d0c4daa15c830f89 upstream.

Device interface layout:
0: ff/ff/ff - serial
1: ff/ff/ff - serial AT+PPP
2: 08/06/50 - storage
3: ff/ff/ff - serial
4: ff/ff/ff - QMI/wwan

Reported-by: Julio Araujo <julio.araujo@wllctel.com.br>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>