linux-stable.git/drivers/usb, branch v3.10.97 Linux kernel stable tree USB: option: fix Cinterion AHxx enumeration 2016-02-19T22:22:40+00:00 John Ernberg john.ernberg@actia.se 2016-01-25T12:27:17+00:00 4478e2240dfbbd5491d5aaf9c92e5fb603f1bfdd commit 4152b387da81617c80cb2946b2d56e3958906b3e upstream. In certain kernel configurations where the cdc_ether and option drivers are compiled as modules there can occur a race condition in enumeration. This causes the option driver to enumerate the ethernet(wwan) interface as usb-serial interfaces. usb-devices output for the modem: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=0055 Rev=00.00 S: Manufacturer=Cinterion S: Product=AHx C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: John Ernberg <john.ernberg@actia.se> Fixes: 1941138e1c02 ("USB: added support for Cinterion's products...") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4152b387da81617c80cb2946b2d56e3958906b3e upstream.

In certain kernel configurations where the cdc_ether and option drivers
are compiled as modules there can occur a race condition in enumeration.
This causes the option driver to enumerate the ethernet(wwan) interface
as usb-serial interfaces.

usb-devices output for the modem:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=0055 Rev=00.00
S:  Manufacturer=Cinterion
S:  Product=AHx
C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether

Signed-off-by: John Ernberg <john.ernberg@actia.se>
Fixes: 1941138e1c02 ("USB: added support for Cinterion's products...")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: option: Adding support for Telit LE922 2016-02-19T22:22:40+00:00 Daniele Palmas dnlplm@gmail.com 2016-01-12T16:22:06+00:00 3bee9e6e206d990619cdb3a62df7cef89eb919b4 commit ff4e2494dc17b173468e1713fdf6237fd8578bc7 upstream. This patch adds support for two PIDs of LE922. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ff4e2494dc17b173468e1713fdf6237fd8578bc7 upstream.

This patch adds support for two PIDs of LE922.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cp210x: add ID for IAI USB to RS485 adaptor 2016-02-19T22:22:40+00:00 Peter Dedecker peter.dedecker@hotmail.com 2016-01-08T11:34:41+00:00 e193199af5199c771e1d38e03349d94969759d3b commit f487c54ddd544e1c9172cd510954f697b77b76e3 upstream. Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by: Peter Dedecker <peter.dedecker@hotmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f487c54ddd544e1c9172cd510954f697b77b76e3 upstream.

Added the USB serial console device ID for IAI Corp. RCB-CV-USB
USB to RS485 adaptor.

Signed-off-by: Peter Dedecker <peter.dedecker@hotmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable 2016-02-19T22:22:40+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2016-01-20T07:43:13+00:00 03b987cbcf2d1b012e95f9530a2652237a721326 commit e03cdf22a2727c60307be6a729233edab3bfda9c upstream. Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by: Harald Linden <harald.linden@7183.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e03cdf22a2727c60307be6a729233edab3bfda9c upstream.

Harald Linden reports that the ftdi_sio driver works properly for the
Yaesu SCU-18 cable if the device ids are added to the driver.  So let's
add them.

Reported-by: Harald Linden <harald.linden@7183.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: visor: fix null-deref at probe 2016-02-19T22:22:40+00:00 Johan Hovold johan@kernel.org 2016-01-12T11:05:20+00:00 f1a9ca0d6949ec920c7e34a1eb48dbf55e84f8ed commit cac9b50b0d75a1d50d6c056ff65c005f3224c8e0 upstream. Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cac9b50b0d75a1d50d6c056ff65c005f3224c8e0 upstream.

Fix null-pointer dereference at probe should a (malicious) Treo device
lack the expected endpoints.

Specifically, the Treo port-setup hack was dereferencing the bulk-in and
interrupt-in urbs without first making sure they had been allocated by
core.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: visor: fix crash on detecting device without write_urbs 2016-02-19T22:22:40+00:00 Vladis Dronov vdronov@redhat.com 2016-01-12T14:10:50+00:00 3b079e37731a962211c65e9aff9928f3ac2e6840 commit cb3232138e37129e88240a98a1d2aba2187ff57c upstream. The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Fixes: cfb8da8f69b8 ("USB: visor: fix initialisation of UX50/TH55 devices") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cb3232138e37129e88240a98a1d2aba2187ff57c upstream.

The visor driver crashes in clie_5_attach() when a specially crafted USB
device without bulk-out endpoint is detected. This fix adds a check that
the device has proper configuration expected by the driver.

Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Fixes: cfb8da8f69b8 ("USB: visor: fix initialisation of UX50/TH55 devices")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ti_usb_3410_502: Fix ID table size 2016-02-19T22:22:40+00:00 Ben Hutchings ben@decadent.org.uk 2015-12-23T13:25:54+00:00 24e1fdb327b97cde4ff92e7ceca86f9882a723e6 Commit 35a2fbc941ac ("USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable") failed to update the size of the ti_id_table_3410 array. This doesn't need to be fixed upstream following commit d7ece6515e12 ("USB: ti_usb_3410_5052: remove vendor/product module parameters") but should be fixed in stable branches older than 3.12. Backports of commit c9d09dc7ad10 ("USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well.") similarly failed to update the size of the ti_id_table_combined array. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Commit 35a2fbc941ac ("USB: serial: ti_usb_3410_5052: new device id for
Abbot strip port cable") failed to update the size of the
ti_id_table_3410 array.  This doesn't need to be fixed upstream
following commit d7ece6515e12 ("USB: ti_usb_3410_5052: remove
vendor/product module parameters") but should be fixed in stable
branches older than 3.12.

Backports of commit c9d09dc7ad10 ("USB: serial: ti_usb_3410_5052: add
Abbott strip port ID to combined table as well.") similarly failed to
update the size of the ti_id_table_combined array.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: fix placement of call to usb_disabled() 2016-02-19T22:22:37+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2016-01-31T19:11:58+00:00 12c1515f4aae559359aec9d9381c2657fb19498a In the backport of 1eaf35e4dd592c59041bc1ed3248c46326da1f5f, the call to usb_disabled() was too late, after we had already done some allocation. Move that call to the top of the function instead, making the logic match what is intended and is in the original patch. Reported-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
In the backport of 1eaf35e4dd592c59041bc1ed3248c46326da1f5f, the call to
usb_disabled() was too late, after we had already done some allocation.
Move that call to the top of the function instead, making the logic
match what is intended and is in the original patch.

Reported-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: refuse loading if nousb is used 2016-01-29T05:49:32+00:00 Oliver Neukum oneukum@suse.com 2015-12-03T14:03:34+00:00 ad55109f9261ff8f317a7df54eb12f842df326f6 commit 1eaf35e4dd592c59041bc1ed3248c46326da1f5f upstream. The module should fail to load. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1eaf35e4dd592c59041bc1ed3248c46326da1f5f upstream.

The module should fail to load.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cp210x: add ID for ELV Marble Sound Board 1 2016-01-29T05:49:32+00:00 Oliver Freyermuth o.freyermuth@googlemail.com 2015-12-28T17:37:38+00:00 c4924b5c530a9fdd4df55868e0bbb593d91fe444 commit f7d7f59ab124748156ea551edf789994f05da342 upstream. Add the USB device ID for ELV Marble Sound Board 1. Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f7d7f59ab124748156ea551edf789994f05da342 upstream.

Add the USB device ID for ELV Marble Sound Board 1.

Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>