linux-stable.git/drivers/usb, branch v3.10.30 Linux kernel stable tree usb: core: get config and string descriptors for unauthorized devices 2014-02-06T19:08:17+00:00 Thomas Pugliese thomas.pugliese@gmail.com 2013-12-09T19:40:29+00:00 6f7c6ef181ee93ba87892db997d8474a094b2695 commit 83e83ecb79a8225e79bc8e54e9aff3e0e27658a2 upstream. There is no need to skip querying the config and string descriptors for unauthorized WUSB devices when usb_new_device is called. It is allowed by WUSB spec. The only action that needs to be delayed until authorization time is the set config. This change allows user mode tools to see the config and string descriptors earlier in enumeration which is needed for some WUSB devices to function properly on Android systems. It also reduces the amount of divergent code paths needed for WUSB devices. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 83e83ecb79a8225e79bc8e54e9aff3e0e27658a2 upstream.

There is no need to skip querying the config and string descriptors for
unauthorized WUSB devices when usb_new_device is called.  It is allowed
by WUSB spec.  The only action that needs to be delayed until
authorization time is the set config.  This change allows user mode
tools to see the config and string descriptors earlier in enumeration
which is needed for some WUSB devices to function properly on Android
systems.  It also reduces the amount of divergent code paths needed
for WUSB devices.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: ehci: add freescale imx28 special write register method 2014-02-06T19:08:13+00:00 Peter Chen peter.chen@freescale.com 2014-01-10T05:51:26+00:00 0660fe75b2fcb2d3cf5d27e07104fc09c1e4e814 commit feffe09f510c475df082546815f9e4a573f6a233 upstream. According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB register error issue", All USB register write operations must use the ARM SWP instruction. So, we implement a special ehci_write for imx28. Discussion for it at below: http://marc.info/?l=linux-usb&m=137996395529294&w=2 Without this patcheset, imx28 works unstable at high AHB bus loading. If the bus loading is not high, the imx28 usb can work well at the most of time. There is a IC errata for this problem, usually, we consider IC errata is a problem not a new feature, and this workaround is needed for that, so we need to add them to stable tree 3.11+. Cc: robert.hodaszi@digi.com Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit feffe09f510c475df082546815f9e4a573f6a233 upstream.

According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB
register error issue", All USB register write operations must
use the ARM SWP instruction. So, we implement a special ehci_write
for imx28.

Discussion for it at below:
http://marc.info/?l=linux-usb&m=137996395529294&w=2

Without this patcheset, imx28 works unstable at high AHB bus loading.
If the bus loading is not high, the imx28 usb can work well at the most
of time. There is a IC errata for this problem, usually, we consider
IC errata is a problem not a new feature, and this workaround is needed
for that, so we need to add them to stable tree 3.11+.

Cc: robert.hodaszi@digi.com
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: fix race between hub_disconnect and recursively_mark_NOTATTACHED 2014-02-06T19:08:13+00:00 Alan Stern stern@rowland.harvard.edu 2014-01-07T15:43:02+00:00 356c1be69288990cb10c1969c45566d5ec03fbe6 commit 543d7784b07ffd16cc82a9cb4e1e0323fd0040f1 upstream. There is a race in the hub driver between hub_disconnect() and recursively_mark_NOTATTACHED(). This race can be triggered if the driver is unbound from a device at the same time as the bus's root hub is removed. When the race occurs, it can cause an oops: BUG: unable to handle kernel NULL pointer dereference at 0000015c IP: [<c16d5fb0>] recursively_mark_NOTATTACHED+0x20/0x60 Call Trace: [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d6082>] usb_set_device_state+0x92/0x120 [<c16d862b>] usb_disconnect+0x2b/0x1a0 [<c16dd4c0>] usb_remove_hcd+0xb0/0x160 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50 [<c1704efc>] ehci_mid_remove+0x1c/0x30 [<c1704f26>] ehci_mid_stop_host+0x16/0x30 [<c16f7698>] penwell_otg_work+0xd28/0x3520 [<c19c945b>] ? __schedule+0x39b/0x7f0 [<c19cdb9d>] ? sub_preempt_count+0x3d/0x50 [<c125e97d>] process_one_work+0x11d/0x3d0 [<c19c7f4d>] ? mutex_unlock+0xd/0x10 [<c125e0e5>] ? manage_workers.isra.24+0x1b5/0x270 [<c125f009>] worker_thread+0xf9/0x320 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50 [<c125ef10>] ? rescuer_thread+0x2b0/0x2b0 [<c1264ac4>] kthread+0x94/0xa0 [<c19d0f77>] ret_from_kernel_thread+0x1b/0x28 [<c1264a30>] ? kthread_create_on_node+0xc0/0xc0 One problem is that recursively_mark_NOTATTACHED() uses the intfdata value and hub->hdev->maxchild while hub_disconnect() is clearing them. Another problem is that it uses hub->ports[i] while the port device is being released. To fix this race, we need to hold the device_state_lock while hub_disconnect() changes the values. (Note that usb_disconnect() and hub_port_connect_change() already acquire this lock at similar critical times during a USB device's life cycle.) We also need to remove the port devices after maxchild has been set to 0, instead of before. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: "Du, Changbin" <changbinx.du@intel.com> Tested-by: "Du, Changbin" <changbinx.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 543d7784b07ffd16cc82a9cb4e1e0323fd0040f1 upstream.

There is a race in the hub driver between hub_disconnect() and
recursively_mark_NOTATTACHED().  This race can be triggered if the
driver is unbound from a device at the same time as the bus's root hub
is removed.  When the race occurs, it can cause an oops:

BUG: unable to handle kernel NULL pointer dereference at 0000015c
IP: [<c16d5fb0>] recursively_mark_NOTATTACHED+0x20/0x60
Call Trace:
 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
 [<c16d6082>] usb_set_device_state+0x92/0x120
 [<c16d862b>] usb_disconnect+0x2b/0x1a0
 [<c16dd4c0>] usb_remove_hcd+0xb0/0x160
 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50
 [<c1704efc>] ehci_mid_remove+0x1c/0x30
 [<c1704f26>] ehci_mid_stop_host+0x16/0x30
 [<c16f7698>] penwell_otg_work+0xd28/0x3520
 [<c19c945b>] ? __schedule+0x39b/0x7f0
 [<c19cdb9d>] ? sub_preempt_count+0x3d/0x50
 [<c125e97d>] process_one_work+0x11d/0x3d0
 [<c19c7f4d>] ? mutex_unlock+0xd/0x10
 [<c125e0e5>] ? manage_workers.isra.24+0x1b5/0x270
 [<c125f009>] worker_thread+0xf9/0x320
 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50
 [<c125ef10>] ? rescuer_thread+0x2b0/0x2b0
 [<c1264ac4>] kthread+0x94/0xa0
 [<c19d0f77>] ret_from_kernel_thread+0x1b/0x28
 [<c1264a30>] ? kthread_create_on_node+0xc0/0xc0

One problem is that recursively_mark_NOTATTACHED() uses the intfdata
value and hub->hdev->maxchild while hub_disconnect() is clearing them.
Another problem is that it uses hub->ports[i] while the port device is
being released.

To fix this race, we need to hold the device_state_lock while
hub_disconnect() changes the values.  (Note that usb_disconnect()
and hub_port_connect_change() already acquire this lock at similar
critical times during a USB device's life cycle.)  We also need to
remove the port devices after maxchild has been set to 0, instead of
before.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: "Du, Changbin" <changbinx.du@intel.com>
Tested-by: "Du, Changbin" <changbinx.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: Check for XHCI_PLAT in xhci_cleanup_msix() 2014-02-06T19:08:13+00:00 Jack Pham jackp@codeaurora.org 2013-11-15T22:53:14+00:00 01aca4a70e1d97fac18a563f30d50f4c2e8d3864 commit 9005355af23856c55a5538c9024355785424821b upstream. If CONFIG_PCI is enabled, make sure xhci_cleanup_msix() doesn't try to free a bogus PCI IRQ or dereference an invalid pci_dev when the xHCI device is actually a platform_device. This patch should be backported to kernels as old as 3.9, that contain the commit 52fb61250a7a132b0cfb9f4a1060a1f3c49e5a25 "xhci-plat: Don't enable legacy PCI interrupts." Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9005355af23856c55a5538c9024355785424821b upstream.

If CONFIG_PCI is enabled, make sure xhci_cleanup_msix()
doesn't try to free a bogus PCI IRQ or dereference an invalid
pci_dev when the xHCI device is actually a platform_device.

This patch should be backported to kernels as old as 3.9, that
contain the commit 52fb61250a7a132b0cfb9f4a1060a1f3c49e5a25
"xhci-plat: Don't enable legacy PCI interrupts."

Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Nokia 502 is an unusual device 2014-02-06T19:08:13+00:00 Mikhail Zolotaryov lebon@lebon.org.ua 2013-12-27T23:56:35+00:00 915ad6ec8715b4799b0b0d3529db348a66fe3c9e commit 0e16114f2db4838251fb64f3b550996ad3585890 upstream. The USB storage operation of Nokia Asha 502 Dual SIM smartphone running Asha Platform 1.1.1 is unreliable in respect of data consistency (i.e. transfered files are corrupted). A similar issue is described here: http://discussions.nokia.com/t5/Asha-and-other-Nokia-Series-30/Nokia-301-USB-transfers-and-corrupted-files/td-p/1974170 The workaround is (MAX_SECTORS_64): rmmod usb_storage && modprobe usb_storage quirks=0421:06aa:m The patch adds the tested device to the unusual list permanently. Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0e16114f2db4838251fb64f3b550996ad3585890 upstream.

The USB storage operation of Nokia Asha 502 Dual SIM smartphone running Asha
Platform 1.1.1 is unreliable in respect of data consistency (i.e. transfered
files are corrupted). A similar issue is described here:
http://discussions.nokia.com/t5/Asha-and-other-Nokia-Series-30/Nokia-301-USB-transfers-and-corrupted-files/td-p/1974170

The workaround is (MAX_SECTORS_64):
   rmmod usb_storage && modprobe usb_storage quirks=0421:06aa:m

The patch adds the tested device to the unusual list permanently.

Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ftdi_sio: added CS5 quirk for broken smartcard readers 2014-02-06T19:08:12+00:00 Colin Leitner colin.leitner@googlemail.com 2014-01-06T20:33:54+00:00 1d09b33eb63bf5d4b172b7f13f6010ebe578557d commit c1f15196ac3b541d084dc80a8fbd8a74c6a0bd44 upstream. Genuine FTDI chips support only CS7/8. A previous fix in commit 8704211f65a2 ("USB: ftdi_sio: fixed handling of unsupported CSIZE setting") enforced this limitation and reported it back to userspace. However, certain types of smartcard readers depend on specific driver behaviour that requests 0 data bits (not 5) to change into a different operating mode if CS5 has been set. This patch reenables this behaviour for all FTDI devices. Tagged to be added to stable, because it affects a lot of users of embedded systems which rely on these readers to work properly. Reported-by: Heinrich Siebmanns <H.Siebmanns@t-online.de> Tested-by: Heinrich Siebmanns <H.Siebmanns@t-online.de> Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c1f15196ac3b541d084dc80a8fbd8a74c6a0bd44 upstream.

Genuine FTDI chips support only CS7/8. A previous fix in commit
8704211f65a2 ("USB: ftdi_sio: fixed handling of unsupported CSIZE
setting") enforced this limitation and reported it back to userspace.

However, certain types of smartcard readers depend on specific
driver behaviour that requests 0 data bits (not 5) to change into a
different operating mode if CS5 has been set.

This patch reenables this behaviour for all FTDI devices.

Tagged to be added to stable, because it affects a lot of users of
embedded systems which rely on these readers to work properly.

Reported-by: Heinrich Siebmanns <H.Siebmanns@t-online.de>
Tested-by: Heinrich Siebmanns <H.Siebmanns@t-online.de>
Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cypress_m8: fix ring-indicator detection and reporting 2014-02-06T19:08:12+00:00 Johan Hovold jhovold@gmail.com 2014-01-02T21:49:24+00:00 52793ef05113658e6391230625f8762cc3905c8f commit 440ebadeae9298d7de3d4d105342691841ec88d0 upstream. Fix ring-indicator (RI) status-bit definition, which was defined as CTS, effectively preventing RI-changes from being detected while reporting false RI status. This bug predates git. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 440ebadeae9298d7de3d4d105342691841ec88d0 upstream.

Fix ring-indicator (RI) status-bit definition, which was defined as CTS,
effectively preventing RI-changes from being detected while reporting
false RI status.

This bug predates git.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: add support for iBall 3.5G connect usb modem 2014-02-06T19:08:12+00:00 Rahul Bedarkar rahulbedarkar89@gmail.com 2014-01-02T15:27:56+00:00 bee144583ec7f2857d54423892c46415ed8b9dcb commit 7d5c1b9c7cb5ec8e52b1adc65c484a923a8ea6c3 upstream. Add support for iBall 3.5G connect usb modem. $lsusb Bus 002 Device 006: ID 1c9e:9605 OMEGA TECHNOLOGY $usb-devices T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9605 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7d5c1b9c7cb5ec8e52b1adc65c484a923a8ea6c3 upstream.

Add support for iBall 3.5G connect usb modem.

$lsusb
Bus 002 Device 006: ID 1c9e:9605 OMEGA TECHNOLOGY

$usb-devices
T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=9605 Rev=00.00
S:  Manufacturer=USB Modem
S:  Product=USB Modem
S:  SerialNumber=1234567890ABCDEF
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Suggested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: option: add new zte 3g modem pids to option driver 2014-02-06T19:08:12+00:00 张君 zjn77777@163.com 2013-12-18T07:37:17+00:00 0ed3ff76395951cb0247c4e69cf2247d14ad9fad commit 4d90b819ae4c7ea8fd5e2bb7edc68c0f334be2e4 upstream. Signed-off-by: Jun zhang <zhang.jun92@zte.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4d90b819ae4c7ea8fd5e2bb7edc68c0f334be2e4 upstream.

Signed-off-by: Jun zhang <zhang.jun92@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: pl2303: fix data corruption on termios updates 2014-02-06T19:08:12+00:00 Johan Hovold jhovold@gmail.com 2013-12-29T18:22:53+00:00 6c19cce59684beb17f6d0b4b4917d11f0c4a2e03 commit 623c8263376c0b8a4b0c220232e7313d762cd0cc upstream. Some PL2303 devices are known to lose bytes if you change serial settings even to the same values as before. Avoid this by comparing the encoded settings with the previsouly used ones before configuring the device. The common case was fixed by commit bf5e5834bffc6 ("pl2303: Fix mode switching regression"), but this problem was still possible to trigger, for instance, by using the TCSETS2-interface to repeatedly request 115201 baud, which gets mapped to 115200 and thus always triggers a settings update. Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 623c8263376c0b8a4b0c220232e7313d762cd0cc upstream.

Some PL2303 devices are known to lose bytes if you change serial
settings even to the same values as before. Avoid this by comparing the
encoded settings with the previsouly used ones before configuring the
device.

The common case was fixed by commit bf5e5834bffc6 ("pl2303: Fix mode
switching regression"), but this problem was still possible to trigger,
for instance, by using the TCSETS2-interface to repeatedly request
115201 baud, which gets mapped to 115200 and thus always triggers a
settings update.

Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>