linux-stable.git/drivers/usb, branch v3.0.42 Linux kernel stable tree usb: serial: mos7840: Fixup mos7840_chars_in_buffer() 2012-08-26T22:12:13+00:00 Mark Ferrell mferrell@uplogix.com 2012-07-24T19:15:13+00:00 edbc37fd3930900161aca75dd3684825179ca091 commit 5c263b92f828af6a8cf54041db45ceae5af8f2ab upstream. * Use the buffer content length as opposed to the total buffer size. This can be a real problem when using the mos7840 as a usb serial-console as all kernel output is truncated during boot. Signed-off-by: Mark Ferrell <mferrell@uplogix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5c263b92f828af6a8cf54041db45ceae5af8f2ab upstream.

 * Use the buffer content length as opposed to the total buffer size.  This can
   be a real problem when using the mos7840 as a usb serial-console as all
   kernel output is truncated during boot.

Signed-off-by: Mark Ferrell <mferrell@uplogix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ftdi_sio: Add VID/PID for Kondo Serial USB 2012-08-26T22:12:12+00:00 Ozan Çağlayan ozancag@gmail.com 2012-08-10T14:25:10+00:00 d0f56add7cd65221d04964de9cc78bddebe2ecae commit 7724a1edbe463b06d4e7831a41149ba095b16c53 upstream. This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter interface: http://www.kondo-robot.com/EN/wp/?cat=28 Tested by controlling an RCB3 board using libRCB3. Signed-off-by: Ozan Çağlayan <ozancag@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7724a1edbe463b06d4e7831a41149ba095b16c53 upstream.

This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter
interface:
http://www.kondo-robot.com/EN/wp/?cat=28

Tested by controlling an RCB3 board using libRCB3.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add ZTE K5006-Z 2012-08-26T22:12:12+00:00 Bjørn Mork bjorn@mork.no 2012-08-15T13:43:33+00:00 bb82df1a3fd0ab9ddab5134abe3e79917cd90954 commit f1b5c997e68533df1f96dcd3068a231bca495603 upstream. The ZTE (Vodafone) K5006-Z use the following interface layout: 00 DIAG 01 secondary 02 modem 03 networkcard 04 storage Ignoring interface #3 which is handled by the qmi_wwan driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f1b5c997e68533df1f96dcd3068a231bca495603 upstream.

The ZTE (Vodafone) K5006-Z use the following
interface layout:

00 DIAG
01 secondary
02 modem
03 networkcard
04 storage

Ignoring interface #3 which is handled by the qmi_wwan
driver.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: support the new interfaces of Huawei Data Card devices in option driver 2012-08-26T22:12:12+00:00 fangxiaozhi huananhu@huawei.com 2012-08-08T09:24:45+00:00 0dfcf2c7d9488159970a9753e15ccb8b0d0cecec commit ee6f827df9107139e8960326e49e1376352ced4d upstream. In this patch, we add new declarations into option.c to support the new interfaces of Huawei Data Card devices. And at the same time, remove the redundant declarations from option.c. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ee6f827df9107139e8960326e49e1376352ced4d upstream.

In this patch, we add new declarations into option.c to support the new
interfaces of Huawei Data Card devices. And at the same time, remove the
redundant declarations from option.c.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Switch PPT ports to EHCI on shutdown. 2012-08-26T22:12:12+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-07-23T15:59:30+00:00 0135372d5c4305a59aee0091847da7ce0cf08ffe commit e95829f474f0db3a4d940cae1423783edd966027 upstream. The Intel desktop boards DH77EB and DH77DF have a hardware issue that can be worked around by BIOS. If the USB ports are switched to xHCI on shutdown, the xHCI host will send a spurious interrupt, which will wake the system. Some BIOS will work around this, but not all. The bug can be avoided if the USB ports are switched back to EHCI on shutdown. The Intel Windows driver switches the ports back to EHCI, so change the Linux xHCI driver to do the same. Unfortunately, we can't tell the two effected boards apart from other working motherboards, because the vendors will change the DMI strings for the DH77EB and DH77DF boards to their own custom names. One example is Compulab's mini-desktop, the Intense-PC. Instead, key off the Panther Point xHCI host PCI vendor and device ID, and switch the ports over for all PPT xHCI hosts. The only impact this will have on non-effected boards is to add a couple hundred milliseconds delay on boot when the BIOS has to switch the ports over from EHCI to xHCI. This patch should be backported to kernels as old as 3.0, that contain the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Denis Turischev <denis@compulab.co.il> Tested-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e95829f474f0db3a4d940cae1423783edd966027 upstream.

The Intel desktop boards DH77EB and DH77DF have a hardware issue that
can be worked around by BIOS.  If the USB ports are switched to xHCI on
shutdown, the xHCI host will send a spurious interrupt, which will wake
the system.  Some BIOS will work around this, but not all.

The bug can be avoided if the USB ports are switched back to EHCI on
shutdown.  The Intel Windows driver switches the ports back to EHCI, so
change the Linux xHCI driver to do the same.

Unfortunately, we can't tell the two effected boards apart from other
working motherboards, because the vendors will change the DMI strings
for the DH77EB and DH77DF boards to their own custom names.  One example
is Compulab's mini-desktop, the Intense-PC.  Instead, key off the
Panther Point xHCI host PCI vendor and device ID, and switch the ports
over for all PPT xHCI hosts.

The only impact this will have on non-effected boards is to add a couple
hundred milliseconds delay on boot when the BIOS has to switch the ports
over from EHCI to xHCI.

This patch should be backported to kernels as old as 3.0, that contain
the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
EHCI/xHCI port switching."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Denis Turischev <denis@compulab.co.il>
Tested-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Increase reset timeout for Renesas 720201 host. 2012-08-26T22:12:12+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-07-23T23:06:08+00:00 b474a496850d10267320b7c2ff7c0ca09d2de8c9 commit 22ceac191211cf6688b1bf6ecd93c8b6bf80ed9b upstream. The NEC/Renesas 720201 xHCI host controller does not complete its reset within 250 milliseconds. In fact, it takes about 9 seconds to reset the host controller, and 1 second for the host to be ready for doorbell rings. Extend the reset and CNR polling timeout to 10 seconds each. This patch should be backported to kernels as old as 2.6.31, that contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci: BIOS handoff and HW initialization." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Edwin Klein Mentink <e.kleinmentink@zonnet.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 22ceac191211cf6688b1bf6ecd93c8b6bf80ed9b upstream.

The NEC/Renesas 720201 xHCI host controller does not complete its reset
within 250 milliseconds.  In fact, it takes about 9 seconds to reset the
host controller, and 1 second for the host to be ready for doorbell
rings.  Extend the reset and CNR polling timeout to 10 seconds each.

This patch should be backported to kernels as old as 2.6.31, that
contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci:
BIOS handoff and HW initialization."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Edwin Klein Mentink <e.kleinmentink@zonnet.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Add Etron XHCI_TRUST_TX_LENGTH quirk. 2012-08-26T22:12:11+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-07-02T20:36:23+00:00 6216cf6ab8e7494da3fda76f9281a228198ce742 commit 5cb7df2b2d3afee7638b3ef23a5bcb89c6f07bd9 upstream. Gary reports that with recent kernels, he notices more xHCI driver warnings: xhci_hcd 0000:03:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? We think his Etron xHCI host controller may have the same buggy behavior as the Fresco Logic xHCI host. When a short transfer is received, the host will mark the transfer as successfully completed when it should be marking it with a short completion. Fix this by turning on the XHCI_TRUST_TX_LENGTH quirk when the Etron host is discovered. Note that Gary has revision 1, but if Etron fixes this bug in future revisions, the quirk will have no effect. This patch should be backported to kernels as old as 2.6.36, that contain a backported version of commit 1530bbc6272d9da1e39ef8e06190d42c13a02733 "xhci: Add new short TX quirk for Fresco Logic host." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Gary E. Miller <gem@rellim.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5cb7df2b2d3afee7638b3ef23a5bcb89c6f07bd9 upstream.

Gary reports that with recent kernels, he notices more xHCI driver
warnings:

xhci_hcd 0000:03:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?

We think his Etron xHCI host controller may have the same buggy behavior
as the Fresco Logic xHCI host.  When a short transfer is received, the
host will mark the transfer as successfully completed when it should be
marking it with a short completion.

Fix this by turning on the XHCI_TRUST_TX_LENGTH quirk when the Etron
host is discovered.  Note that Gary has revision 1, but if Etron fixes
this bug in future revisions, the quirk will have no effect.

This patch should be backported to kernels as old as 2.6.36, that
contain a backported version of commit
1530bbc6272d9da1e39ef8e06190d42c13a02733 "xhci: Add new short TX quirk
for Fresco Logic host."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Gary E. Miller <gem@rellim.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: feed USB device information to the /dev/random driver 2012-08-15T19:04:12+00:00 Theodore Ts'o tytso@mit.edu 2012-07-04T15:22:20+00:00 52d1114f461ad4d33d8bc38987b5991161712e96 commit b04b3156a20d395a7faa8eed98698d1e17a36000 upstream. Send the USB device's serial, product, and manufacturer strings to the /dev/random driver to help seed its pools. Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b04b3156a20d395a7faa8eed98698d1e17a36000 upstream.

Send the USB device's serial, product, and manufacturer strings to the
/dev/random driver to help seed its pools.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: echi-dbgp: increase the controller wait time to come out of halt. 2012-08-09T15:27:53+00:00 Colin Ian King colin.king@canonical.com 2012-07-30T15:06:42+00:00 aeaab8a0fee896fb31f2e5044f86d2a270d65cb6 commit f96a4216e85050c0a9d41a41ecb0ae9d8e39b509 upstream. The default 10 microsecond delay for the controller to come out of halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond. This is based on emperical testing on various USB debug ports on modern machines such as a Lenovo X220i and an Ivybridge development platform that needed to wait ~450-950 microseconds. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f96a4216e85050c0a9d41a41ecb0ae9d8e39b509 upstream.

The default 10 microsecond delay for the controller to come out of
halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond.

This is based on emperical testing on various USB debug ports on
modern machines such as a Lenovo X220i and an Ivybridge development
platform that needed to wait ~450-950 microseconds.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: gadget: Fix g_ether interface link status 2012-08-09T15:27:35+00:00 Kevin Cernekee cernekee@gmail.com 2012-06-25T04:11:22+00:00 f58f16f2039cca9dc58a406593e5f46c6a35e0df commit 31bde1ceaa873bcaecd49e829bfabceacc4c512d upstream. A "usb0" interface that has never been connected to a host has an unknown operstate, and therefore the IFF_RUNNING flag is (incorrectly) asserted when queried by ifconfig, ifplugd, etc. This is a result of calling netif_carrier_off() too early in the probe function; it should be called after register_netdev(). Similar problems have been fixed in many other drivers, e.g.: e826eafa6 (bonding: Call netif_carrier_off after register_netdevice) 0d672e9f8 (drivers/net: Call netif_carrier_off at the end of the probe) 6a3c869a6 (cxgb4: fix reported state of interfaces without link) Fix is to move netif_carrier_off() to the end of the function. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 31bde1ceaa873bcaecd49e829bfabceacc4c512d upstream.

A "usb0" interface that has never been connected to a host has an unknown
operstate, and therefore the IFF_RUNNING flag is (incorrectly) asserted
when queried by ifconfig, ifplugd, etc.  This is a result of calling
netif_carrier_off() too early in the probe function; it should be called
after register_netdev().

Similar problems have been fixed in many other drivers, e.g.:

    e826eafa6 (bonding: Call netif_carrier_off after register_netdevice)
    0d672e9f8 (drivers/net: Call netif_carrier_off at the end of the probe)
    6a3c869a6 (cxgb4: fix reported state of interfaces without link)

Fix is to move netif_carrier_off() to the end of the function.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>