linux-stable.git/drivers/usb, branch linux-2.6.33.y Linux kernel stable tree Revert "usb: musb: restore INDEX register in resume path" 2011-11-07T21:47:35+00:00 Greg Kroah-Hartman gregkh@suse.de 2011-11-02T21:04:11+00:00 948ed3ced0bab3d89267b7d02b6a4a2b25ce0133 This reverts commit 5aa8a93b5d44724f1f63357b300eca208fb069d0. Turns out this breaks the build, and as such, really isn't needed for the 2.6.33-stable branch at all. Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
This reverts commit 5aa8a93b5d44724f1f63357b300eca208fb069d0.

Turns out this breaks the build, and as such, really isn't needed for
the 2.6.33-stable branch at all.

Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
QE/FHCI: fixed the CONTROL bug 2011-11-07T21:47:21+00:00 Jerry Huang r66093@freescale.com 2011-10-18T05:09:48+00:00 fc94e7993593e0594524c8bef4616d38b1be9206 commit 273d23574f9dacd9c63c80e7d63639a669aad441 upstream. For USB CONTROL transaction, when the data length is zero, the IN package is needed to finish this transaction in status stage. Signed-off-by: Jerry Huang <r66093@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 273d23574f9dacd9c63c80e7d63639a669aad441 upstream.

For USB CONTROL transaction, when the data length is zero,
the IN package is needed to finish this transaction in status stage.

Signed-off-by: Jerry Huang <r66093@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board 2011-11-07T21:47:20+00:00 Peter Stuge peter@stuge.se 2011-10-10T01:34:54+00:00 77447121fe52022de89494cc59631d9a5b58cdd8 commit 3687f641307eeff6f7fe31a88dc39db88e89238b upstream. Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard, and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger Interface Board. The ICDI board can also be used stand-alone, for other boards and chips than the kit it came with. The ICDI has both old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm pitch connector. Tested with EK-LM3S9B90, where the BD-ICDI board is included. Signed-off-by: Peter Stuge <peter@stuge.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 3687f641307eeff6f7fe31a88dc39db88e89238b upstream.

Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard,
and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger
Interface Board. The ICDI board can also be used stand-alone, for
other boards and chips than the kit it came with. The ICDI has both
old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm
pitch connector.

Tested with EK-LM3S9B90, where the BD-ICDI board is included.

Signed-off-by: Peter Stuge <peter@stuge.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: ftdi_sio: add PID for Sony Ericsson Urban 2011-11-07T21:47:19+00:00 Hakan Kvist hakan.kvist@sonyericsson.com 2011-10-03T11:41:15+00:00 01776c3d004bf5595bf27474c324b496a0b14652 commit 74bdf22b5c3858b06af46f19d05c23e76c40a3bb upstream. Add PID 0xfc8a, 0xfc8b for device Sony Ericsson Urban Signed-off-by: Hakan Kvist <hakan.kvist@sonyericsson.com> Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 74bdf22b5c3858b06af46f19d05c23e76c40a3bb upstream.

Add PID 0xfc8a, 0xfc8b for device Sony Ericsson Urban

Signed-off-by: Hakan Kvist <hakan.kvist@sonyericsson.com>
Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: pl2303: add id for SMART device 2011-11-07T21:47:18+00:00 Eric Benoit eric@ecks.ca 2011-09-24T06:04:50+00:00 4ca9c2db667698a8bcfd065a81711648a83a1e0c commit 598f0b703506da841d3459dc0c48506be14d1778 upstream. Add vendor and product ID for the SMART USB to serial adapter. These were meant to be used with their SMART Board whiteboards, but can be re-purposed for other tasks. Tested and working (at at least 9600 bps). Signed-off-by: Eric Benoit <eric@ecks.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 598f0b703506da841d3459dc0c48506be14d1778 upstream.

Add vendor and product ID for the SMART USB to serial adapter. These
were meant to be used with their SMART Board whiteboards, but can be
re-purposed for other tasks. Tested and working (at at least 9600 bps).

Signed-off-by: Eric Benoit <eric@ecks.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
usb: cdc-acm: Owen SI-30 support 2011-11-07T21:47:18+00:00 Denis Pershin dyp@perchine.com 2011-09-04T10:37:21+00:00 f7e1f927886e0f16d76490e5cab7fa906728e396 commit 65e52f41fa944cef2e6d4222b8c54f46cc575214 upstream. here is the patch to support Owen SI-30 device. This is a pulse counter controller. http://www.owen.ru/en/catalog/93788515 usb-drivers output: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03eb ProdID=0030 Rev=01.01 C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=00 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm This patch is installed on my home system which receives data from this controller connected to cold water counter. Signed-off-by: Denis Pershin <dyp@perchine.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 65e52f41fa944cef2e6d4222b8c54f46cc575214 upstream.

here is the patch to support Owen SI-30 device.
This is a pulse counter controller.
http://www.owen.ru/en/catalog/93788515

usb-drivers output:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03eb ProdID=0030 Rev=01.01
C:  #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=00 Driver=cdc_acm
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm

This patch is installed on my home system which receives data from this
controller connected to cold water counter.

Signed-off-by: Denis Pershin <dyp@perchine.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: pid_ns: ensure pid is not freed during kill_pid_info_as_uid 2011-11-07T21:47:17+00:00 Serge Hallyn serge.hallyn@canonical.com 2011-09-26T15:18:29+00:00 03c47d73c14c9859e092a2c6346c278942876caa commit aec01c5895051849ed842dc5b8794017a7751f28 upstream. Alan Stern points out that after spin_unlock(&ps->lock) there is no guarantee that ps->pid won't be freed. Since kill_pid_info_as_uid() is called after the spin_unlock(), the pid passed to it must be pinned. Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit aec01c5895051849ed842dc5b8794017a7751f28 upstream.

Alan Stern points out that after spin_unlock(&ps->lock) there is no
guarantee that ps->pid won't be freed.  Since kill_pid_info_as_uid() is
called after the spin_unlock(), the pid passed to it must be pinned.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
usb/core/devio.c: Check for printer class specific request 2011-11-07T21:47:16+00:00 Matthias Dellweg 2500@gmx.de 2011-09-25T12:26:25+00:00 edd9f053b52d5882c9c37432939e03db8634ebc0 commit 393cbb5151ecda9f9e14e3082d048dd27a1ff9f6 upstream. In the usb printer class specific request get_device_id the value of wIndex is (interface << 8 | altsetting) instead of just interface. This enables the detection of some printers with libusb. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Matthias Dellweg <2500@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 393cbb5151ecda9f9e14e3082d048dd27a1ff9f6 upstream.

In the usb printer class specific request get_device_id the value of
wIndex is (interface << 8 | altsetting) instead of just interface.
This enables the detection of some printers with libusb.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthias Dellweg <2500@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: storage: Use normalized sense when emulating autosense 2011-11-07T21:47:16+00:00 Luben Tuikov ltuikov@yahoo.com 2010-11-11T23:43:11+00:00 f28e8a981f6e7fe867866d00ba0468cb7a82bbd3 commit e16da02fcdf1c5e824432f88abf42623dafdf191 upstream. This patch solves two things: 1) Enables autosense emulation code to correctly interpret descriptor format sense data, and 2) Fixes a bug whereby the autosense emulation code would overwrite descriptor format sense data with SENSE KEY HARDWARE ERROR in fixed format, to incorrectly look like this: Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor] Oct 21 14:11:07 localhost kernel: Descriptor sense data with sense descriptors (in hex): Oct 21 14:11:07 localhost kernel: 72 01 04 1d 00 00 00 0e 09 0c 00 00 00 00 00 00 Oct 21 14:11:07 localhost kernel: 00 4f 00 c2 00 50 Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc] ASC=0x4 ASCQ=0x1d Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit e16da02fcdf1c5e824432f88abf42623dafdf191 upstream.

This patch solves two things:
1) Enables autosense emulation code to correctly
interpret descriptor format sense data, and
2) Fixes a bug whereby the autosense emulation
code would overwrite descriptor format sense data
with SENSE KEY HARDWARE ERROR in fixed format, to
incorrectly look like this:

Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc]  Sense Key : Recovered Error [current] [descriptor]
Oct 21 14:11:07 localhost kernel: Descriptor sense data with sense descriptors (in hex):
Oct 21 14:11:07 localhost kernel:        72 01 04 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
Oct 21 14:11:07 localhost kernel:        00 4f 00 c2 00 50
Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc]  ASC=0x4 ASCQ=0x1d

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
usbmon vs. tcpdump: fix dropped packet count 2011-11-07T21:47:15+00:00 Johannes Stezenbach js@sig21.net 2011-09-08T13:39:15+00:00 d01f24effa7cc7e480ef08291fa3359179ddff0e commit 236c448cb6e7f82096101e1ace4b77f8b38f82c8 upstream. Report the number of dropped packets instead of zero when using the binary usbmon interface with tcpdump. # tcpdump -i usbmon1 -w dump tcpdump: listening on usbmon1, link-type USB_LINUX_MMAPPED (USB with padded Linux header), capture size 65535 bytes ^C2155 packets captured 2155 packets received by filter 1019 packets dropped by kernel Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 236c448cb6e7f82096101e1ace4b77f8b38f82c8 upstream.

Report the number of dropped packets instead of zero
when using the binary usbmon interface with tcpdump.

# tcpdump -i usbmon1 -w dump
tcpdump: listening on usbmon1, link-type USB_LINUX_MMAPPED (USB with padded Linux header), capture size 65535 bytes
^C2155 packets captured
2155 packets received by filter
1019 packets dropped by kernel

Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>