linux-stable.git/drivers/usb/typec, branch v6.6.26 Linux kernel stable tree usb: typec: ucsi: Fix race between typec_switch and role_switch 2024-04-10T14:35:54+00:00 Krishna Kurapati quic_kriskura@quicinc.com 2024-03-01T04:09:14+00:00 113b12e1648881bf3322cfc906392e2314dde781 [ Upstream commit f5e9bda03aa50ffad36eccafe893d004ef213c43 ] When orientation switch is enabled in ucsi glink, there is a xhci probe failure seen when booting up in host mode in reverse orientation. During bootup the following things happen in multiple drivers: a) DWC3 controller driver initializes the core in device mode when the dr_mode is set to DRD. It relies on role_switch call to change role to host. b) QMP driver initializes the lanes to TYPEC_ORIENTATION_NORMAL as a normal routine. It relies on the typec_switch_set call to get notified of orientation changes. c) UCSI core reads the UCSI_GET_CONNECTOR_STATUS via the glink and provides initial role switch to dwc3 controller. When booting up in host mode with orientation TYPEC_ORIENTATION_REVERSE, then we see the following things happening in order: a) UCSI gives initial role as host to dwc3 controller ucsi_register_port. Upon receiving this notification, the dwc3 core needs to program GCTL from PRTCAP_DEVICE to PRTCAP_HOST and as part of this change, it asserts GCTL Core soft reset and waits for it to be completed before shifting it to host. Only after the reset is done will the dwc3_host_init be invoked and xhci is probed. DWC3 controller expects that the usb phy's are stable during this process i.e., the phy init is already done. b) During the 100ms wait for GCTL core soft reset, the actual notification from PPM is received by ucsi_glink via pmic glink for changing role to host. The pmic_glink_ucsi_notify routine first sends the orientation change to QMP and then sends role to dwc3 via ucsi framework. This is happening exactly at the time GCTL core soft reset is being processed. c) When QMP driver receives typec switch to TYPEC_ORIENTATION_REVERSE, it then re-programs the phy at the instant GCTL core soft reset has been asserted by dwc3 controller due to which the QMP PLL lock fails in qmp_combo_usb_power_on. d) After the 100ms of GCTL core soft reset is completed, the dwc3 core goes for initializing the host mode and invokes xhci probe. But at this point the QMP is non-responsive and as a result, the xhci plat probe fails during xhci_reset. Fix this by passing orientation switch to available ucsi instances if their gpio configuration is available before ucsi_register is invoked so that by the time, the pmic_glink_ucsi_notify provides typec_switch to QMP, the lane is already configured and the call would be a NOP thus not racing with role switch. Cc: stable@vger.kernel.org Fixes: c6165ed2f425 ("usb: ucsi: glink: use the connector orientation GPIO to provide switch events") Suggested-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240301040914.458492-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f5e9bda03aa50ffad36eccafe893d004ef213c43 ]

When orientation switch is enabled in ucsi glink, there is a xhci
probe failure seen when booting up in host mode in reverse
orientation.

During bootup the following things happen in multiple drivers:

a) DWC3 controller driver initializes the core in device mode when the
dr_mode is set to DRD. It relies on role_switch call to change role to
host.

b) QMP driver initializes the lanes to TYPEC_ORIENTATION_NORMAL as a
normal routine. It relies on the typec_switch_set call to get notified
of orientation changes.

c) UCSI core reads the UCSI_GET_CONNECTOR_STATUS via the glink and
provides initial role switch to dwc3 controller.

When booting up in host mode with orientation TYPEC_ORIENTATION_REVERSE,
then we see the following things happening in order:

a) UCSI gives initial role as host to dwc3 controller ucsi_register_port.
Upon receiving this notification, the dwc3 core needs to program GCTL from
PRTCAP_DEVICE to PRTCAP_HOST and as part of this change, it asserts GCTL
Core soft reset and waits for it to be  completed before shifting it to
host. Only after the reset is done will the dwc3_host_init be invoked and
xhci is probed. DWC3 controller expects that the usb phy's are stable
during this process i.e., the phy init is already done.

b) During the 100ms wait for GCTL core soft reset, the actual notification
from PPM is received by ucsi_glink via pmic glink for changing role to
host. The pmic_glink_ucsi_notify routine first sends the orientation
change to QMP and then sends role to dwc3 via ucsi framework. This is
happening exactly at the time GCTL core soft reset is being processed.

c) When QMP driver receives typec switch to TYPEC_ORIENTATION_REVERSE, it
then re-programs the phy at the instant GCTL core soft reset has been
asserted by dwc3 controller due to which the QMP PLL lock fails in
qmp_combo_usb_power_on.

d) After the 100ms of GCTL core soft reset is completed, the dwc3 core
goes for initializing the host mode and invokes xhci probe. But at this
point the QMP is non-responsive and as a result, the xhci plat probe fails
during xhci_reset.

Fix this by passing orientation switch to available ucsi instances if
their gpio configuration is available before ucsi_register is invoked so
that by the time, the pmic_glink_ucsi_notify provides typec_switch to QMP,
the lane is already configured and the call would be a NOP thus not racing
with role switch.

Cc: stable@vger.kernel.org
Fixes: c6165ed2f425 ("usb: ucsi: glink: use the connector orientation GPIO to provide switch events")
Suggested-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240301040914.458492-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset 2024-04-03T13:29:01+00:00 Christian A. Ehrhardt lk@c--e.de 2024-03-20T07:39:26+00:00 db4aaf281a5be7d562cdb76926f3e23bf4f8f843 commit 3de4f996a0b5412aa451729008130a488f71563e upstream. Check the UCSI_CCI_RESET_COMPLETE complete flag before starting another reset. Use a UCSI_SET_NOTIFICATION_ENABLE command to clear the flag if it is set. Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Cc: stable <stable@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-6-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3de4f996a0b5412aa451729008130a488f71563e upstream.

Check the UCSI_CCI_RESET_COMPLETE complete flag before starting
another reset. Use a UCSI_SET_NOTIFICATION_ENABLE command to clear
the flag if it is set.

Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-6-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi_acpi: Refactor and fix DELL quirk 2024-04-03T13:29:01+00:00 Christian A. Ehrhardt lk@c--e.de 2024-03-20T07:39:25+00:00 1f510af8dbc36a092f623b6ec1d6aa82d71d71eb commit 6aaceb7d9cd00f3e065dc4b054ecfe52c5253b03 upstream. Some DELL systems don't like UCSI_ACK_CC_CI commands with the UCSI_ACK_CONNECTOR_CHANGE but not the UCSI_ACK_COMMAND_COMPLETE bit set. The current quirk still leaves room for races because it requires two consecutive ACK commands to be sent. Refactor and significantly simplify the quirk to fix this: Send a dummy command and bundle the connector change ack with the command completion ack in a single UCSI_ACK_CC_CI command. This removes the need to probe for the quirk. While there define flag bits for struct ucsi_acpi->flags in ucsi_acpi.c and don't re-use definitions from ucsi.h for struct ucsi->flags. Fixes: f3be347ea42d ("usb: ucsi_acpi: Quirk to ack a connector change ack cmd") Cc: stable@vger.kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-5-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6aaceb7d9cd00f3e065dc4b054ecfe52c5253b03 upstream.

Some DELL systems don't like UCSI_ACK_CC_CI commands with the
UCSI_ACK_CONNECTOR_CHANGE but not the UCSI_ACK_COMMAND_COMPLETE
bit set. The current quirk still leaves room for races because
it requires two consecutive ACK commands to be sent.

Refactor and significantly simplify the quirk to fix this:
Send a dummy command and bundle the connector change ack with the
command completion ack in a single UCSI_ACK_CC_CI command.
This removes the need to probe for the quirk.

While there define flag bits for struct ucsi_acpi->flags in ucsi_acpi.c
and don't re-use definitions from ucsi.h for struct ucsi->flags.

Fixes: f3be347ea42d ("usb: ucsi_acpi: Quirk to ack a connector change ack cmd")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-5-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Ack unsupported commands 2024-04-03T13:29:01+00:00 Christian A. Ehrhardt lk@c--e.de 2024-03-20T07:39:24+00:00 5857494b5056ceaf16d81348108c07acf8617c87 commit 6b5c85ddeea77d18c4b69e3bda60e9374a20c304 upstream. If a command completes the OPM must send an ack. This applies to unsupported commands, too. Send the required ACK for unsupported commands. Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Cc: stable <stable@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-4-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6b5c85ddeea77d18c4b69e3bda60e9374a20c304 upstream.

If a command completes the OPM must send an ack. This applies
to unsupported commands, too.

Send the required ACK for unsupported commands.

Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-4-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Clear EVENT_PENDING under PPM lock 2024-04-03T13:29:01+00:00 Christian A. Ehrhardt lk@c--e.de 2024-03-20T07:39:22+00:00 68f57d01382799227560182d3c9294a84471f604 commit 15b2e71b4653b3e13df34695a29ebeee237c5af2 upstream. Suppose we sleep on the PPM lock after clearing the EVENT_PENDING bit because the thread for another connector is executing a command. In this case the command completion of the other command will still report the connector change for our connector. Clear the EVENT_PENDING bit under the PPM lock to avoid another useless call to ucsi_handle_connector_change() in this case. Fixes: c9aed03a0a68 ("usb: ucsi: Add missing ppm_lock") Cc: stable <stable@kernel.org> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-2-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 15b2e71b4653b3e13df34695a29ebeee237c5af2 upstream.

Suppose we sleep on the PPM lock after clearing the EVENT_PENDING
bit because the thread for another connector is executing a command.
In this case the command completion of the other command will still
report the connector change for our connector.

Clear the EVENT_PENDING bit under the PPM lock to avoid another
useless call to ucsi_handle_connector_change() in this case.

Fixes: c9aed03a0a68 ("usb: ucsi: Add missing ppm_lock")
Cc: stable <stable@kernel.org>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-2-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: Return size of buffer if pd_set operation succeeds 2024-04-03T13:29:01+00:00 Kyle Tso kyletso@google.com 2024-03-19T07:43:09+00:00 c708b704c26d700c38144cb22417a6aae4291121 commit 53f5094fdf5deacd99b8655df692e9278506724d upstream. The attribute writing should return the number of bytes used from the buffer on success. Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso <kyletso@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240319074309.3306579-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 53f5094fdf5deacd99b8655df692e9278506724d upstream.

The attribute writing should return the number of bytes used from the
buffer on success.

Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240319074309.3306579-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group 2024-04-03T13:28:42+00:00 RD Babiera rdbabiera@google.com 2024-02-29T00:11:02+00:00 4a22aeac24d0d5f26ba741408e8b5a4be6dc5dc0 commit 165376f6b23e9a779850e750fb2eb06622e5a531 upstream. The DisplayPort driver's sysfs nodes may be present to the userspace before typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns NULL in those cases. Remove manual sysfs node creation in favor of adding attribute group as default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is not used here otherwise the path to the sysfs nodes is no longer compliant with the ABI. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Link: https://lore.kernel.org/r/20240229001101.3889432-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 165376f6b23e9a779850e750fb2eb06622e5a531 upstream.

The DisplayPort driver's sysfs nodes may be present to the userspace before
typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that
a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in
hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns
NULL in those cases.

Remove manual sysfs node creation in favor of adding attribute group as
default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is
not used here otherwise the path to the sysfs nodes is no longer compliant
with the ABI.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Link: https://lore.kernel.org/r/20240229001101.3889432-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tpcm: Fix PORT_RESET behavior for self powered devices 2024-04-03T13:28:40+00:00 Badhri Jagan Sridharan badhri@google.com 2024-02-28T00:05:12+00:00 0f952b1bb04863e21df53b8b215f33ddc88a6af3 commit 197331b27ac890d0209232d5f669830cd00e8918 upstream. While commit 69f89168b310 ("usb: typec: tpcm: Fix issues with power being removed during reset") fixes the boot issues for bus powered devices such as LibreTech Renegade Elite/Firefly, it trades off the CC pins NOT being Hi-Zed during errory recovery (i.e PORT_RESET) for devices which are NOT bus powered(a.k.a self powered). This change Hi-Zs the CC pins only for self powered devices, thus preventing brown out for bus powered devices Adhering to spec is gaining more importance due to the Common charger initiative enforced by the European Union. Quoting from the spec: 4.5.2.2.2.1 ErrorRecovery State Requirements The port shall not drive VBUS or VCONN, and shall present a high-impedance to ground (above zOPEN) on its CC1 and CC2 pins. Hi-Zing the CC pins is the inteded behavior for PORT_RESET. CC pins are set to default state after tErrorRecovery in PORT_RESET_WAIT_OFF. 4.5.2.2.2.2 Exiting From ErrorRecovery State A Sink shall transition to Unattached.SNK after tErrorRecovery. A Source shall transition to Unattached.SRC after tErrorRecovery. Fixes: 69f89168b310 ("usb: typec: tpcm: Fix issues with power being removed during reset") Cc: stable@vger.kernel.org Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Tested-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240228000512.746252-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 197331b27ac890d0209232d5f669830cd00e8918 upstream.

While commit 69f89168b310 ("usb: typec: tpcm: Fix issues with power being
removed during reset") fixes the boot issues for bus powered devices such
as LibreTech Renegade Elite/Firefly, it trades off the CC pins NOT being
Hi-Zed during errory recovery (i.e PORT_RESET) for devices which are NOT
bus powered(a.k.a self powered). This change Hi-Zs the CC pins only for
self powered devices, thus preventing brown out for bus powered devices

Adhering to spec is gaining more importance due to the Common charger
initiative enforced by the European Union.

Quoting from the spec:
    4.5.2.2.2.1 ErrorRecovery State Requirements
    The port shall not drive VBUS or VCONN, and shall present a
    high-impedance to ground (above zOPEN) on its CC1 and CC2 pins.

Hi-Zing the CC pins is the inteded behavior for PORT_RESET.
CC pins are set to default state after tErrorRecovery in
PORT_RESET_WAIT_OFF.

    4.5.2.2.2.2 Exiting From ErrorRecovery State
    A Sink shall transition to Unattached.SNK after tErrorRecovery.
    A Source shall transition to Unattached.SRC after tErrorRecovery.

Fixes: 69f89168b310 ("usb: typec: tpcm: Fix issues with power being removed during reset")
Cc: stable@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240228000512.746252-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Clean up UCSI_CABLE_PROP macros 2024-04-03T13:28:25+00:00 Jameson Thies jthies@google.com 2024-03-05T02:58:01+00:00 4a1f0678d15e7921f184fe053d733600a45de299 [ Upstream commit 4d0a5a9915793377c0fe1a8d78de6bcd92cea963 ] Clean up UCSI_CABLE_PROP macros by fixing a bitmask shifting error for plug type and updating the modal support macro for consistent naming. Fixes: 3cf657f07918 ("usb: typec: ucsi: Remove all bit-fields") Cc: stable@vger.kernel.org Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jameson Thies <jthies@google.com> Link: https://lore.kernel.org/r/20240305025804.1290919-2-jthies@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4d0a5a9915793377c0fe1a8d78de6bcd92cea963 ]

Clean up UCSI_CABLE_PROP macros by fixing a bitmask shifting error for
plug type and updating the modal support macro for consistent naming.

Fixes: 3cf657f07918 ("usb: typec: ucsi: Remove all bit-fields")
Cc: stable@vger.kernel.org
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jameson Thies <jthies@google.com>
Link: https://lore.kernel.org/r/20240305025804.1290919-2-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role" 2024-03-01T12:35:01+00:00 Ondrej Jirman megi@xff.cz 2024-02-17T16:20:21+00:00 6cf046b3acea853a719c1e8a106144c89323b166 commit 23b1d2d99b0f55326f05e7d757fa197c4a95dc5c upstream. The reverted commit makes the state machine only ever go from SRC_ATTACH_WAIT to SNK_TRY in endless loop when toggling. After revert it goes to SRC_ATTACHED after initially trying SNK_TRY earlier, as it should for toggling to ever detect the power source mode and the port is again able to provide power to attached power sinks. This reverts commit 2d6d80127006ae3da26b1f21a65eccf957f2d1e5. Cc: stable@vger.kernel.org Fixes: 2d6d80127006 ("usb: typec: tcpm: reset counter when enter into unattached state after try role") Signed-off-by: Ondrej Jirman <megi@xff.cz> Link: https://lore.kernel.org/r/20240217162023.1719738-1-megi@xff.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 23b1d2d99b0f55326f05e7d757fa197c4a95dc5c upstream.

The reverted commit makes the state machine only ever go from SRC_ATTACH_WAIT
to SNK_TRY in endless loop when toggling. After revert it goes to SRC_ATTACHED
after initially trying SNK_TRY earlier, as it should for toggling to ever detect
the power source mode and the port is again able to provide power to attached
power sinks.

This reverts commit 2d6d80127006ae3da26b1f21a65eccf957f2d1e5.

Cc: stable@vger.kernel.org
Fixes: 2d6d80127006 ("usb: typec: tcpm: reset counter when enter into unattached state after try role")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20240217162023.1719738-1-megi@xff.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>