linux-stable.git/drivers/usb/typec, branch v6.5.4

usb: typec: bus: verify partner exists in typec_altmode_attention

2023-09-13T07:53:07+00:00

commit f23643306430f86e2f413ee2b986e0773e79da31 upstream.

Some usb hubs will negotiate DisplayPort Alt mode with the device
but will then negotiate a data role swap after entering the alt
mode. The data role swap causes the device to unregister all alt
modes, however the usb hub will still send Attention messages
even after failing to reregister the Alt Mode. type_altmode_attention
currently does not verify whether or not a device's altmode partner
exists, which results in a NULL pointer error when dereferencing
the typec_altmode and typec_altmode_ops belonging to the altmode
partner.

Verify the presence of a device's altmode partner before sending
the Attention message to the Alt Mode driver.

Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera 
Reviewed-by: Heikki Krogerus 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: set initial svdm version based on pd revision

2023-09-13T07:53:07+00:00

commit c97cd0b4b54eb42aed7f6c3c295a2d137f6d2416 upstream.

When sending Discover Identity messages to a Port Partner that uses Power
Delivery v2 and SVDM v1, we currently send PD v2 messages with SVDM v2.0,
expecting the port partner to respond with its highest supported SVDM
version as stated in Section 6.4.4.2.3 in the Power Delivery v3
specification. However, sending SVDM v2 to some Power Delivery v2 port
partners results in a NAK whereas sending SVDM v1 does not.

NAK messages can be handled by the initiator (PD v3 section 6.4.4.2.5.1),
and one solution could be to resend Discover Identity on a lower SVDM
version if possible. But, Section 6.4.4.3 of PD v2 states that "A NAK
response Should be taken as an indication not to retry that particular
Command."

Instead, we can set the SVDM version to the maximum one supported by the
negotiated PD revision. When operating in PD v2, this obeys Section
6.4.4.2.3, which states the SVDM field "Shall be set to zero to indicate
Version 1.0." In PD v3, the SVDM field "Shall be set to 01b to indicate
Version 2.0."

Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera 
Reviewed-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230731165926.1815338-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci: clear the fault status bit

2023-09-06T20:22:25+00:00

commit 23e60c8daf5ec2ab1b731310761b668745fcf6ed upstream.

According the "USB Type-C Port Controller Interface Specification v2.0"
the TCPC sets the fault status register bit-7
(AllRegistersResetToDefault) once the registers have been reset to
their default values.

This triggers an alert(-irq) on PTN5110 devices albeit we do mask the
fault-irq, which may cause a kernel hang. Fix this generically by writing
a one to the corresponding bit-7.

Cc: stable@vger.kernel.org
Fixes: 74e656d6b055 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Reported-by: "Angus Ainslie (Purism)" 
Closes: https://lore.kernel.org/all/20190508002749.14816-2-angus@akkea.ca/
Reported-by: Christian Bach 
Closes: https://lore.kernel.org/regressions/ZR0P278MB07737E5F1D48632897D51AC3EB329@ZR0P278MB0773.CHEP278.PROD.OUTLOOK.COM/t/
Signed-off-by: Marco Felsch 
Signed-off-by: Fabio Estevam 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20230816172502.1155079-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman

tcpm: Avoid soft reset when partner does not support get_status

2023-09-06T20:22:25+00:00

commit 78e0ea4277546debf7e96797ac3b768539cc44f6 upstream.

When partner does not support get_status message, tcpm right now
responds with soft reset message. This causes PD renegotiation to
happen and resets PPS link. Avoid soft resetting the link when
partner does not support get_status message to mitigate PPS resets.

[  208.926752] Setting voltage/current limit 9500 mV 2450 mA
[  208.930407] set_auto_vbus_discharge_threshold mode:3 pps_active:y vbus:9500 ret:0
[  208.930418] state change SNK_TRANSITION_SINK -> SNK_READY [rev3 POWER_NEGOTIATION]
[  208.930455] AMS POWER_NEGOTIATION finished

// ALERT message from the Source
[  213.948442] PD RX, header: 0x19a6 [1]
[  213.948451] state change SNK_READY -> GET_STATUS_SEND [rev3 GETTING_SOURCE_SINK_STATUS]
[  213.948457] PD TX, header: 0x492
[  213.950402] PD TX complete, status: 0
[  213.950427] pending state change GET_STATUS_SEND -> GET_STATUS_SEND_TIMEOUT @ 60 ms [rev3 GETTING_SOURCE_SINK_STATUS]

// NOT_SUPPORTED from the Source
[  213.959954] PD RX, header: 0xbb0 [1]

// sink sends SOFT_RESET
[  213.959958] state change GET_STATUS_SEND -> SNK_SOFT_RESET [rev3 GETTING_SOURCE_SINK_STATUS]
[  213.959962] AMS GETTING_SOURCE_SINK_STATUS finished
[  213.959964] AMS SOFT_RESET_AMS start
[  213.959966] state change SNK_SOFT_RESET -> AMS_START [rev3 SOFT_RESET_AMS]
[  213.959969] state change AMS_START -> SOFT_RESET_SEND [rev3 SOFT_RESET_AMS]

Cc: stable@vger.kernel.org
Fixes: 8dea75e11380 ("usb: typec: tcpm: Protocol Error handling")
Signed-off-by: Badhri Jagan Sridharan 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230820044449.1005889-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: mux: intel: Add dependency on USB_COMMON

2023-08-04T12:56:17+00:00

This fixes an undefined reference to `usb_debug_root' issue
when USB_COMMON is not enabled.

Fixes: 0a453dc9f260 ("usb: typec: intel_pmc_mux: Expose IOM port status to debugfs")
Reported-by: Randy Dunlap 
Closes: https://lore.kernel.org/lkml/c3bb8781-676d-2448-cfbb-62e29f1f570b@infradead.org/
Cc: Rajat Khandelwal 
Signed-off-by: Heikki Krogerus 
Tested-by: Randy Dunlap  # build-tested
Acked-by: Randy Dunlap 
Link: https://lore.kernel.org/r/20230731131210.43158-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: nb7vpq904m: Add an error handling path in nb7vpq904m_probe()

2023-08-04T12:56:07+00:00

In case of error in the nb7vpq904m_probe() probe function, some resources
need to be freed, as already done in the remove function.

Add the missing error handling path and adjust code accordingly.

Fixes: 88d8f3ac9c67 ("usb: typec: add support for the nb7vpq904m Type-C Linear Redriver")
Signed-off-by: Christophe JAILLET 
Reviewed-by: Neil Armstrong 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/9118954765821ea9f1179883602b4eca63e91749.1689716381.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: Signal hpd when configuring pin assignment

2023-08-04T12:54:54+00:00

When connecting to some DisplayPort partners, the initial status update
after entering DisplayPort Alt Mode notifies that the DFP_D/UFP_D is not in
the connected state. This leads to sending a configure message that keeps
the device in USB mode. The port partner then sets DFP_D/UFP_D to the
connected state and HPD to high in the same Attention message. Currently,
the HPD signal is dropped in order to handle configuration.

This patch saves changes to the HPD signal when the device chooses to
configure during dp_altmode_status_update, and invokes sysfs_notify if
necessary for HPD after configuring.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230726020903.1409072-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Fix response to vsafe0V event

2023-08-04T12:54:26+00:00

Do not transition to SNK_UNATTACHED state when receiving vsafe0v event
while in SNK_HARD_RESET_WAIT_VBUS. Ignore VBUS off events as well as
in some platforms VBUS off can be signalled more than once.

[143515.364753] Requesting mux state 1, usb-role 2, orientation 2
[143515.365520] pending state change SNK_HARD_RESET_SINK_OFF -> SNK_HARD_RESET_SINK_ON @ 650 ms [rev3 HARD_RESET]
[143515.632281] CC1: 0 -> 0, CC2: 3 -> 0 [state SNK_HARD_RESET_SINK_OFF, polarity 1, disconnected]
[143515.637214] VBUS on
[143515.664985] VBUS off
[143515.664992] state change SNK_HARD_RESET_SINK_OFF -> SNK_HARD_RESET_WAIT_VBUS [rev3 HARD_RESET]
[143515.665564] VBUS VSAFE0V
[143515.665566] state change SNK_HARD_RESET_WAIT_VBUS -> SNK_UNATTACHED [rev3 HARD_RESET]

Fixes: 28b43d3d746b ("usb: typec: tcpm: Introduce vsafe0v for vbus")
Cc: 
Signed-off-by: Badhri Jagan Sridharan 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230712085722.1414743-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: Use sysfs_emit_at when concatenating the string

2023-07-25T15:45:29+00:00

The buffer address used in sysfs_emit should be aligned to PAGE_SIZE.
Use sysfs_emit_at instead to offset the buffer.

Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230623151036.3955013-4-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: Iterate pds array when showing the pd list

2023-07-25T15:45:29+00:00

The pointers of each usb_power_delivery handles are stored in "pds"
array returned from the pd_get ops but not in the adjacent memory
calculated from "pd". Get the handles from "pds" array directly instead
of deriving them from "pd".

Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230623151036.3955013-3-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman