linux-stable.git/drivers/usb/typec, branch v6.4.12 Linux kernel stable tree usb: typec: altmodes/displayport: Signal hpd when configuring pin assignment 2023-08-16T16:32:21+00:00 RD Babiera rdbabiera@google.com 2023-07-26T02:09:02+00:00 ce1ebdd6e63930d351e25f7b1cb4745d5ffcdf48 commit 5a5ccd61cfd76156cb3e0373c300c509d05448ce upstream. When connecting to some DisplayPort partners, the initial status update after entering DisplayPort Alt Mode notifies that the DFP_D/UFP_D is not in the connected state. This leads to sending a configure message that keeps the device in USB mode. The port partner then sets DFP_D/UFP_D to the connected state and HPD to high in the same Attention message. Currently, the HPD signal is dropped in order to handle configuration. This patch saves changes to the HPD signal when the device chooses to configure during dp_altmode_status_update, and invokes sysfs_notify if necessary for HPD after configuring. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230726020903.1409072-1-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5a5ccd61cfd76156cb3e0373c300c509d05448ce upstream.

When connecting to some DisplayPort partners, the initial status update
after entering DisplayPort Alt Mode notifies that the DFP_D/UFP_D is not in
the connected state. This leads to sending a configure message that keeps
the device in USB mode. The port partner then sets DFP_D/UFP_D to the
connected state and HPD to high in the same Attention message. Currently,
the HPD signal is dropped in order to handle configuration.

This patch saves changes to the HPD signal when the device chooses to
configure during dp_altmode_status_update, and invokes sysfs_notify if
necessary for HPD after configuring.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230726020903.1409072-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tcpm: Fix response to vsafe0V event 2023-08-16T16:32:21+00:00 Badhri Jagan Sridharan badhri@google.com 2023-07-12T08:57:22+00:00 aba8c65bb9e447682ff2d8f43d789af0541162f0 commit 4270d2b4845e820b274702bfc2a7140f69e4d19d upstream. Do not transition to SNK_UNATTACHED state when receiving vsafe0v event while in SNK_HARD_RESET_WAIT_VBUS. Ignore VBUS off events as well as in some platforms VBUS off can be signalled more than once. [143515.364753] Requesting mux state 1, usb-role 2, orientation 2 [143515.365520] pending state change SNK_HARD_RESET_SINK_OFF -> SNK_HARD_RESET_SINK_ON @ 650 ms [rev3 HARD_RESET] [143515.632281] CC1: 0 -> 0, CC2: 3 -> 0 [state SNK_HARD_RESET_SINK_OFF, polarity 1, disconnected] [143515.637214] VBUS on [143515.664985] VBUS off [143515.664992] state change SNK_HARD_RESET_SINK_OFF -> SNK_HARD_RESET_WAIT_VBUS [rev3 HARD_RESET] [143515.665564] VBUS VSAFE0V [143515.665566] state change SNK_HARD_RESET_WAIT_VBUS -> SNK_UNATTACHED [rev3 HARD_RESET] Fixes: 28b43d3d746b ("usb: typec: tcpm: Introduce vsafe0v for vbus") Cc: <stable@vger.kernel.org> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230712085722.1414743-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4270d2b4845e820b274702bfc2a7140f69e4d19d upstream.

Do not transition to SNK_UNATTACHED state when receiving vsafe0v event
while in SNK_HARD_RESET_WAIT_VBUS. Ignore VBUS off events as well as
in some platforms VBUS off can be signalled more than once.

[143515.364753] Requesting mux state 1, usb-role 2, orientation 2
[143515.365520] pending state change SNK_HARD_RESET_SINK_OFF -> SNK_HARD_RESET_SINK_ON @ 650 ms [rev3 HARD_RESET]
[143515.632281] CC1: 0 -> 0, CC2: 3 -> 0 [state SNK_HARD_RESET_SINK_OFF, polarity 1, disconnected]
[143515.637214] VBUS on
[143515.664985] VBUS off
[143515.664992] state change SNK_HARD_RESET_SINK_OFF -> SNK_HARD_RESET_WAIT_VBUS [rev3 HARD_RESET]
[143515.665564] VBUS VSAFE0V
[143515.665566] state change SNK_HARD_RESET_WAIT_VBUS -> SNK_UNATTACHED [rev3 HARD_RESET]

Fixes: 28b43d3d746b ("usb: typec: tcpm: Introduce vsafe0v for vbus")
Cc: <stable@vger.kernel.org>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230712085722.1414743-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: Use sysfs_emit_at when concatenating the string 2023-08-03T08:26:03+00:00 Kyle Tso kyletso@google.com 2023-06-23T15:10:36+00:00 816569fddc4e93589bbcbc9e0ff5bb1ae56a82cf commit 609fded3f91972ada551c141c5d04a71704f8967 upstream. The buffer address used in sysfs_emit should be aligned to PAGE_SIZE. Use sysfs_emit_at instead to offset the buffer. Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso <kyletso@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230623151036.3955013-4-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 609fded3f91972ada551c141c5d04a71704f8967 upstream.

The buffer address used in sysfs_emit should be aligned to PAGE_SIZE.
Use sysfs_emit_at instead to offset the buffer.

Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230623151036.3955013-4-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: Iterate pds array when showing the pd list 2023-08-03T08:26:03+00:00 Kyle Tso kyletso@google.com 2023-06-23T15:10:35+00:00 bd90eafbacf412c551950bdb75773244d4daed16 commit 4b642dc9829507e4afabc03d32a18abbdb192c5e upstream. The pointers of each usb_power_delivery handles are stored in "pds" array returned from the pd_get ops but not in the adjacent memory calculated from "pd". Get the handles from "pds" array directly instead of deriving them from "pd". Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso <kyletso@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230623151036.3955013-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4b642dc9829507e4afabc03d32a18abbdb192c5e upstream.

The pointers of each usb_power_delivery handles are stored in "pds"
array returned from the pd_get ops but not in the adjacent memory
calculated from "pd". Get the handles from "pds" array directly instead
of deriving them from "pd".

Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230623151036.3955013-3-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: Set port->pd before adding device for typec_port 2023-08-03T08:26:03+00:00 Kyle Tso kyletso@google.com 2023-06-23T15:10:34+00:00 54c6d5fa59d2c800ca09472e4415b12c3ed64107 commit b33ebb2415e7e0a55ee3d049c2890d3a3e3805b6 upstream. When calling device_add in the registration of typec_port, it will do the NULL check on usb_power_delivery handle in typec_port for the visibility of the device attributes. It is always NULL because port->pd is set in typec_port_set_usb_power_delivery which is later than the device_add call. Set port->pd before device_add and only link the device after that. Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso <kyletso@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230623151036.3955013-2-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b33ebb2415e7e0a55ee3d049c2890d3a3e3805b6 upstream.

When calling device_add in the registration of typec_port, it will do
the NULL check on usb_power_delivery handle in typec_port for the
visibility of the device attributes. It is always NULL because port->pd
is set in typec_port_set_usb_power_delivery which is later than the
device_add call.

Set port->pd before device_add and only link the device after that.

Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230623151036.3955013-2-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Mark dGPUs as DEVICE scope 2023-07-19T14:36:55+00:00 Mario Limonciello mario.limonciello@amd.com 2023-05-18T16:11:50+00:00 7e3b21ebfe3302b8ddba8d68e63dfc7a3299d9f2 commit a7fbfd44c0204f0629288edfd0d77829edb4a2f8 upstream. power_supply_is_system_supplied() checks whether any power supplies are present that aren't batteries to decide whether the system is running on DC or AC. Downstream drivers use this to make performance decisions. Navi dGPUs include an UCSI function that has been exported since commit 17631e8ca2d3 ("i2c: designware: Add driver support for AMD NAVI GPU"). This UCSI function registers a power supply since commit 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class") but this is not a system power supply. As the power supply for a dGPU is only for powering devices connected to dGPU, create a device property to indicate that the UCSI endpoint is only for the scope of `POWER_SUPPLY_SCOPE_DEVICE`. Link: https://lore.kernel.org/lkml/20230516182541.5836-2-mario.limonciello@amd.com/ Reviewed-by: Evan Quan <evan.quan@amd.com> Tested-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a7fbfd44c0204f0629288edfd0d77829edb4a2f8 upstream.

power_supply_is_system_supplied() checks whether any power
supplies are present that aren't batteries to decide whether
the system is running on DC or AC.  Downstream drivers use
this to make performance decisions.

Navi dGPUs include an UCSI function that has been exported
since commit 17631e8ca2d3 ("i2c: designware: Add driver
support for AMD NAVI GPU").

This UCSI function registers a power supply since commit
992a60ed0d5e ("usb: typec: ucsi: register with power_supply class")
but this is not a system power supply.

As the power supply for a dGPU is only for powering devices connected
to dGPU, create a device property to indicate that the UCSI endpoint
is only for the scope of `POWER_SUPPLY_SCOPE_DEVICE`.

Link: https://lore.kernel.org/lkml/20230516182541.5836-2-mario.limonciello@amd.com/
Reviewed-by: Evan Quan <evan.quan@amd.com>
Tested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: Fix fast_role_swap_current show function 2023-06-13T10:16:07+00:00 Pavan Holla pholla@chromium.org 2023-06-07T19:33:26+00:00 92c9c3baad6b1fd584fbabeaa4756f9b77926cb5 The current implementation mistakenly performs a & operation on the output of sysfs_emit. This patch performs the & operation before calling sysfs_emit. Fixes: 662a60102c12 ("usb: typec: Separate USB Power Delivery from USB Type-C") Cc: stable <stable@kernel.org> Reported-by: Benson Leung <bleung@chromium.org> Signed-off-by: Pavan Holla <pholla@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Benson Leung <bleung@chromium.org> Message-ID: <20230607193328.3359487-1-pholla@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The current implementation mistakenly performs a & operation on
the output of sysfs_emit. This patch performs the & operation before
calling sysfs_emit.

Fixes: 662a60102c12 ("usb: typec: Separate USB Power Delivery from USB Type-C")
Cc: stable <stable@kernel.org>
Reported-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Pavan Holla <pholla@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Message-ID: <20230607193328.3359487-1-pholla@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Fix command cancellation 2023-06-13T09:52:51+00:00 Heikki Krogerus heikki.krogerus@linux.intel.com 2023-06-06T11:58:02+00:00 c4a8bfabefed706bb9150867db528ceefd5cb5fe The Cancel command was passed to the write callback as the offset instead of as the actual command which caused NULL pointer dereference. Reported-by: Stephan Bolten <stephan.bolten@gmx.net> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217517 Fixes: 094902bc6a3c ("usb: typec: ucsi: Always cancel the command if PPM reports BUSY condition") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Message-ID: <20230606115802.79339-1-heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The Cancel command was passed to the write callback as the
offset instead of as the actual command which caused NULL
pointer dereference.

Reported-by: Stephan Bolten <stephan.bolten@gmx.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217517
Fixes: 094902bc6a3c ("usb: typec: ucsi: Always cancel the command if PPM reports BUSY condition")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Message-ID: <20230606115802.79339-1-heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tps6598x: Fix broken polling mode after system suspend/resume 2023-05-30T14:29:41+00:00 Roger Quadros rogerq@kernel.org 2023-05-30T06:59:26+00:00 fcfe84236ec0974fe92f0578d1d58ed805c4b70f During system resume we need to resume the polling workqueue if client->irq is not set else polling will no longer work. Fixes: 0d6a119cecd7 ("usb: typec: tps6598x: Add support for polling interrupts status") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230530065926.6161-1-rogerq@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
During system resume we need to resume the polling workqueue
if client->irq is not set else polling will no longer work.

Fixes: 0d6a119cecd7 ("usb: typec: tps6598x: Add support for polling interrupts status")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230530065926.6161-1-rogerq@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tps6598x: Fix fault at module removal 2023-05-13T09:51:09+00:00 Roger Quadros rogerq@kernel.org 2023-04-21T10:17:20+00:00 94ea04ec790887b5b0e43429a92c18a1e692ec08 We need to cancel the delayed workqueue if it is being used else it will cause paging request fault during module removal. Fixes: 0d6a119cecd7 ("usb: typec: tps6598x: Add support for polling interrupts status") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230421101720.34318-1-rogerq@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We need to cancel the delayed workqueue if it is being used
else it will cause paging request fault during module removal.

Fixes: 0d6a119cecd7 ("usb: typec: tps6598x: Add support for polling interrupts status")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230421101720.34318-1-rogerq@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>