linux-stable.git/drivers/usb/typec, branch v6.18.2 Linux kernel stable tree usb: typec: ucsi: fix use-after-free caused by uec->work 2025-12-18T13:03:42+00:00 Duoming Zhou duoming@zju.edu.cn 2025-11-25T10:36:27+00:00 a880ef71a1c8da266b88491213c37893e2126489 commit 2b7a0f47aaf2439d517ba0a6b29c66a535302154 upstream. The delayed work uec->work is scheduled in gaokun_ucsi_probe() but never properly canceled in gaokun_ucsi_remove(). This creates use-after-free scenarios where the ucsi and gaokun_ucsi structure are freed after ucsi_destroy() completes execution, while the gaokun_ucsi_register_worker() might be either currently executing or still pending in the work queue. The already-freed gaokun_ucsi or ucsi structure may then be accessed. Furthermore, the race window is 3 seconds, which is sufficiently long to make this bug easily reproducible. The following is the trace captured by KASAN: ================================================================== BUG: KASAN: slab-use-after-free in __run_timers+0x5ec/0x630 Write of size 8 at addr ffff00000ec28cc8 by task swapper/0/0 ... Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x78/0x90 print_report+0x114/0x580 kasan_report+0xa4/0xf0 __asan_report_store8_noabort+0x20/0x2c __run_timers+0x5ec/0x630 run_timer_softirq+0xe8/0x1cc handle_softirqs+0x294/0x720 __do_softirq+0x14/0x20 ____do_softirq+0x10/0x1c call_on_irq_stack+0x30/0x48 do_softirq_own_stack+0x1c/0x28 __irq_exit_rcu+0x27c/0x364 irq_exit_rcu+0x10/0x1c el1_interrupt+0x40/0x60 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 arch_local_irq_enable+0x4/0x8 (P) do_idle+0x334/0x458 cpu_startup_entry+0x60/0x70 rest_init+0x158/0x174 start_kernel+0x2f8/0x394 __primary_switched+0x8c/0x94 Allocated by task 72 on cpu 0 at 27.510341s: kasan_save_stack+0x2c/0x54 kasan_save_track+0x24/0x5c kasan_save_alloc_info+0x40/0x54 __kasan_kmalloc+0xa0/0xb8 __kmalloc_node_track_caller_noprof+0x1c0/0x588 devm_kmalloc+0x7c/0x1c8 gaokun_ucsi_probe+0xa0/0x840 auxiliary_bus_probe+0x94/0xf8 really_probe+0x17c/0x5b8 __driver_probe_device+0x158/0x2c4 driver_probe_device+0x10c/0x264 __device_attach_driver+0x168/0x2d0 bus_for_each_drv+0x100/0x188 __device_attach+0x174/0x368 device_initial_probe+0x14/0x20 bus_probe_device+0x120/0x150 device_add+0xb3c/0x10fc __auxiliary_device_add+0x88/0x130 ... Freed by task 73 on cpu 1 at 28.910627s: kasan_save_stack+0x2c/0x54 kasan_save_track+0x24/0x5c __kasan_save_free_info+0x4c/0x74 __kasan_slab_free+0x60/0x8c kfree+0xd4/0x410 devres_release_all+0x140/0x1f0 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x344/0x460 device_release_driver+0x18/0x24 bus_remove_device+0x198/0x274 device_del+0x310/0xa84 ... The buggy address belongs to the object at ffff00000ec28c00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 200 bytes inside of freed 512-byte region The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ec28 head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff) page_type: f5(slab) raw: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000 head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 03fffe0000000002 fffffdffc03b0a01 00000000ffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff00000ec28b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff00000ec28c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff00000ec28c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff00000ec28d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff00000ec28d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Add disable_delayed_work_sync() in gaokun_ucsi_remove() to ensure that uec->work is properly canceled and prevented from executing after the ucsi and gaokun_ucsi structure have been deallocated. Fixes: 00327d7f2c8c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver") Cc: stable <stable@kernel.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/cc31e12ef9ffbf86676585b02233165fd33f0d8e.1764065838.git.duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2b7a0f47aaf2439d517ba0a6b29c66a535302154 upstream.

The delayed work uec->work is scheduled in gaokun_ucsi_probe()
but never properly canceled in gaokun_ucsi_remove(). This creates
use-after-free scenarios where the ucsi and gaokun_ucsi structure
are freed after ucsi_destroy() completes execution, while the
gaokun_ucsi_register_worker() might be either currently executing
or still pending in the work queue. The already-freed gaokun_ucsi
or ucsi structure may then be accessed.

Furthermore, the race window is 3 seconds, which is sufficiently
long to make this bug easily reproducible. The following is the
trace captured by KASAN:

==================================================================
BUG: KASAN: slab-use-after-free in __run_timers+0x5ec/0x630
Write of size 8 at addr ffff00000ec28cc8 by task swapper/0/0
...
Call trace:
 show_stack+0x18/0x24 (C)
 dump_stack_lvl+0x78/0x90
 print_report+0x114/0x580
 kasan_report+0xa4/0xf0
 __asan_report_store8_noabort+0x20/0x2c
 __run_timers+0x5ec/0x630
 run_timer_softirq+0xe8/0x1cc
 handle_softirqs+0x294/0x720
 __do_softirq+0x14/0x20
 ____do_softirq+0x10/0x1c
 call_on_irq_stack+0x30/0x48
 do_softirq_own_stack+0x1c/0x28
 __irq_exit_rcu+0x27c/0x364
 irq_exit_rcu+0x10/0x1c
 el1_interrupt+0x40/0x60
 el1h_64_irq_handler+0x18/0x24
 el1h_64_irq+0x6c/0x70
 arch_local_irq_enable+0x4/0x8 (P)
 do_idle+0x334/0x458
 cpu_startup_entry+0x60/0x70
 rest_init+0x158/0x174
 start_kernel+0x2f8/0x394
 __primary_switched+0x8c/0x94

Allocated by task 72 on cpu 0 at 27.510341s:
 kasan_save_stack+0x2c/0x54
 kasan_save_track+0x24/0x5c
 kasan_save_alloc_info+0x40/0x54
 __kasan_kmalloc+0xa0/0xb8
 __kmalloc_node_track_caller_noprof+0x1c0/0x588
 devm_kmalloc+0x7c/0x1c8
 gaokun_ucsi_probe+0xa0/0x840  auxiliary_bus_probe+0x94/0xf8
 really_probe+0x17c/0x5b8
 __driver_probe_device+0x158/0x2c4
 driver_probe_device+0x10c/0x264
 __device_attach_driver+0x168/0x2d0
 bus_for_each_drv+0x100/0x188
 __device_attach+0x174/0x368
 device_initial_probe+0x14/0x20
 bus_probe_device+0x120/0x150
 device_add+0xb3c/0x10fc
 __auxiliary_device_add+0x88/0x130
...

Freed by task 73 on cpu 1 at 28.910627s:
 kasan_save_stack+0x2c/0x54
 kasan_save_track+0x24/0x5c
 __kasan_save_free_info+0x4c/0x74
 __kasan_slab_free+0x60/0x8c
 kfree+0xd4/0x410
 devres_release_all+0x140/0x1f0
 device_unbind_cleanup+0x20/0x190
 device_release_driver_internal+0x344/0x460
 device_release_driver+0x18/0x24
 bus_remove_device+0x198/0x274
 device_del+0x310/0xa84
...

The buggy address belongs to the object at ffff00000ec28c00
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 200 bytes inside of
 freed 512-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ec28
head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff)
page_type: f5(slab)
raw: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 03fffe0000000002 fffffdffc03b0a01 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff00000ec28b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff00000ec28c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff00000ec28c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                              ^
 ffff00000ec28d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff00000ec28d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Add disable_delayed_work_sync() in gaokun_ucsi_remove() to ensure
that uec->work is properly canceled and prevented from executing
after the ucsi and gaokun_ucsi structure have been deallocated.

Fixes: 00327d7f2c8c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/cc31e12ef9ffbf86676585b02233165fd33f0d8e.1764065838.git.duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe() 2025-12-18T13:03:42+00:00 Duoming Zhou duoming@zju.edu.cn 2025-11-25T10:36:26+00:00 a902fc01813a412f60e4b27caa10803f7deb7369 commit 6b120ef99fbcba9e413783561f8cc160719db589 upstream. The gaokun_ucsi_probe() uses ucsi_create() to allocate a UCSI instance. The ucsi_create() validates whether ops->poll_cci is defined, and if not, it directly returns -EINVAL. However, the gaokun_ucsi_ops structure does not define the poll_cci, causing ucsi_create() always fail with -EINVAL. This issue can be observed in the kernel log with the following error: ucsi_huawei_gaokun.ucsi huawei_gaokun_ec.ucsi.0: probe with driver ucsi_huawei_gaokun.ucsi failed with error -22 Fix the issue by adding the missing poll_cci callback to gaokun_ucsi_ops. Fixes: 00327d7f2c8c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver") Cc: stable <stable@kernel.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com> Link: https://patch.msgid.link/4d077d6439d728be68646bb8c8678436a3a0885e.1764065838.git.duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6b120ef99fbcba9e413783561f8cc160719db589 upstream.

The gaokun_ucsi_probe() uses ucsi_create() to allocate a UCSI instance.
The ucsi_create() validates whether ops->poll_cci is defined, and if not,
it directly returns -EINVAL. However, the gaokun_ucsi_ops structure does
not define the poll_cci, causing ucsi_create() always fail with -EINVAL.
This issue can be observed in the kernel log with the following error:

ucsi_huawei_gaokun.ucsi huawei_gaokun_ec.ucsi.0: probe with driver
ucsi_huawei_gaokun.ucsi failed with error -22

Fix the issue by adding the missing poll_cci callback to gaokun_ucsi_ops.

Fixes: 00327d7f2c8c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://patch.msgid.link/4d077d6439d728be68646bb8c8678436a3a0885e.1764065838.git.duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: psy: Set max current to zero when disconnected 2025-11-09T02:11:24+00:00 Jameson Thies jthies@google.com 2025-11-06T01:14:46+00:00 23379a17334fc24c4a9cbd9967d33dcd9323cc7c The ucsi_psy_get_current_max function defaults to 0.1A when it is not clear how much current the partner device can support. But this does not check the port is connected, and will report 0.1A max current when nothing is connected. Update ucsi_psy_get_current_max to report 0A when there is no connection. Fixes: af833e7f7db3 ("usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default") Cc: stable@vger.kernel.org Signed-off-by: Jameson Thies <jthies@google.com> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Rule: add Link: https://lore.kernel.org/stable/20251017000051.2094101-1-jthies%40google.com Link: https://patch.msgid.link/20251106011446.2052583-1-jthies@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The ucsi_psy_get_current_max function defaults to 0.1A when it is not
clear how much current the partner device can support. But this does
not check the port is connected, and will report 0.1A max current when
nothing is connected. Update ucsi_psy_get_current_max to report 0A when
there is no connection.

Fixes: af833e7f7db3 ("usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default")
Cc: stable@vger.kernel.org
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Rule: add
Link: https://lore.kernel.org/stable/20251017000051.2094101-1-jthies%40google.com
Link: https://patch.msgid.link/20251106011446.2052583-1-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcpm: switch check for role_sw device with fw_node 2025-10-22T08:01:42+00:00 Michael Grzeschik m.grzeschik@pengutronix.de 2025-10-13T09:43:40+00:00 2d8713f807a49b8a67c221670e50ae04967e915d When there is no port entry in the tcpci entry itself, the driver will trigger an error message "OF: graph: no port node found in /...../typec" . It is documented that the dts node should contain an connector entry with ports and several port pointing to devices with usb-role-switch property set. Only when those connector entry is missing, it should check for port entries in the main node. We switch the search order for looking after ports, which will avoid the failure message while there are explicit connector entries. Fixes: d56de8c9a17d ("usb: typec: tcpm: try to get role switch from tcpc fwnode") Cc: stable <stable@kernel.org> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://patch.msgid.link/20251013-b4-ml-topic-tcpm-v2-1-63c9b2ab8a0b@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When there is no port entry in the tcpci entry itself, the driver will
trigger an error message "OF: graph: no port node found in /...../typec" .

It is documented that the dts node should contain an connector entry
with ports and several port pointing to devices with usb-role-switch
property set. Only when those connector entry is missing, it should
check for port entries in the main node.

We switch the search order for looking after ports, which will avoid the
failure message while there are explicit connector entries.

Fixes: d56de8c9a17d ("usb: typec: tcpm: try to get role switch from tcpc fwnode")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20251013-b4-ml-topic-tcpm-v2-1-63c9b2ab8a0b@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge 6.17-rc6 into usb-next 2025-09-15T06:18:40+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2025-09-15T06:18:40+00:00 a4d43c1f17b9f143af5868285c513c866e9cf67b We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tipd: Handle mode transitions for CD321x 2025-09-14T14:08:21+00:00 Hector Martin marcan@marcan.st 2025-09-14T12:56:16+00:00 82432bbfb9e83b7e81d04660fe129b99a29b2ac2 On Apple Silicon machines there is no control over which alt mode is chosen. The CD321x' firmware negotiates the target mode on its own and only lets the main CPU know after the mode has already been chosen. Especially after plugging a new cable in this can result to quick mode changes from e.g. power only -> USB3 only -> USB3+DisplayPort in a short time. It is not possile to influence this in any way and we also do not get direct access to the PDOs or VDOs exchanged via USB PD. Additionally, mode changes must be tightly synchronized between DWC3 and the Type C PHY and most mode changes require a full reset of DWC3 to make the port work correctly. This is all done synchronously from the role switch handler inside the DWC3 glue driver on these machines to avoid tripping any failsafes or watchdogs inside the Type-C PHY that may, in the worst case, reset the entire SoC. To be able to control all this we trigger the entire process in the correct order directly from the TIPD driver and de-bounce any mode changes to avoid tearing down and re-setting DWC3 back up multiple times any time a new connection is made. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Co-developed-by: Sven Peter <sven@kernel.org> Signed-off-by: Sven Peter <sven@kernel.org> Reviewed-by: Janne Grunau <j@jannau.net> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-11-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
On Apple Silicon machines there is no control over which alt mode is
chosen. The CD321x' firmware negotiates the target mode on its own and
only lets the main CPU know after the mode has already been chosen.
Especially after plugging a new cable in this can result to quick mode
changes from e.g. power only -> USB3 only -> USB3+DisplayPort in a short
time. It is not possile to influence this in any way and we also do not
get direct access to the PDOs or VDOs exchanged via USB PD.

Additionally, mode changes must be tightly synchronized between DWC3 and
the Type C PHY and most mode changes require a full reset of DWC3 to
make the port work correctly.
This is all done synchronously from the role switch handler inside the
DWC3 glue driver on these machines to avoid tripping any failsafes or
watchdogs inside the Type-C PHY that may, in the worst case, reset the
entire SoC.

To be able to control all this we trigger the entire process in the
correct order directly from the TIPD driver and de-bounce any mode
changes to avoid tearing down and re-setting DWC3 back up multiple times
any time a new connection is made.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Co-developed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-11-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tipd: Read data status in probe and cache its value 2025-09-14T14:08:21+00:00 Hector Martin marcan@marcan.st 2025-09-14T12:56:15+00:00 04041fd7d6ec0bc5c4277711e17b43ffb45e30ba Just like for power status we also need to keep track of data status to be able to detect mode changes once we introduce de-bouncing for CD321x. Read it during probe and keep a cached copy of its value. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sven Peter <sven@kernel.org> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-10-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Just like for power status we also need to keep track of data status to
be able to detect mode changes once we introduce de-bouncing for CD321x.
Read it during probe and keep a cached copy of its value.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-10-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tipd: Use read_power_status function in probe 2025-09-14T14:08:21+00:00 Hector Martin marcan@marcan.st 2025-09-14T12:56:14+00:00 77ed2f4538da7356a1813e9d4e4c13de6e3d5a2a We need the initial power status to be able to reliably detect connector changes once we introduce de-bouncing for CD321x next. read_power_status takes care of this and also forwards the status to the trace subsystem so let's use that instead of open-coding it inside probe. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sven Peter <sven@kernel.org> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-9-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We need the initial power status to be able to reliably detect connector
changes once we introduce de-bouncing for CD321x next. read_power_status
takes care of this and also forwards the status to the trace subsystem
so let's use that instead of open-coding it inside probe.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-9-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tipd: Update partner identity when power status was updated 2025-09-14T14:08:21+00:00 Hector Martin marcan@marcan.st 2025-09-14T12:56:13+00:00 36c791c1996db13d5042960aa5895f777239845b Whenever the power status is changed make sure to also update the partner identity to be able to detect changes once de-bouncing and mode changes are added for CD321x. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sven Peter <sven@kernel.org> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-8-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Whenever the power status is changed make sure to also update the
partner identity to be able to detect changes once de-bouncing and mode
changes are added for CD321x.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-8-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tipd: Register DisplayPort and Thunderbolt altmodes for cd321x 2025-09-14T14:08:21+00:00 Sven Peter sven@kernel.org 2025-09-14T12:56:12+00:00 7b1d318506839ea8b71b258a3e48b1f87f69d1bb Ports equipped with a CD321x are only found on Apple Silicon machines and always support DisplayPort, Thunderbolt and USB4. Register these port modes unconditionally. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sven Peter <sven@kernel.org> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-7-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Ports equipped with a CD321x are only found on Apple Silicon machines
and always support DisplayPort, Thunderbolt and USB4. Register these
port modes unconditionally.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-7-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>