linux-stable.git/drivers/usb/typec, branch v5.4.232

usb: typec: altmodes/displayport: Fix probe pin assign check

2023-02-22T11:50:33+00:00

commit 54e5c00a4eb0a4c663445b245f641bbfab142430 upstream.

While checking Pin Assignments of the port and partner during probe, we
don't take into account whether the peripheral is a plug or receptacle.

This manifests itself in a mode entry failure on certain docks and
dongles with captive cables. For instance, the Startech.com Type-C to DP
dongle (Model #CDP2DP) advertises its DP VDO as 0x405. This would fail
the Pin Assignment compatibility check, despite it supporting
Pin Assignment C as a UFP.

Update the check to use the correct DP Pin Assign macros that
take the peripheral's receptacle bit into account.

Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles")
Cc: stable@vger.kernel.org
Reported-by: Diana Zigterman 
Signed-off-by: Prashant Malani 
Link: https://lore.kernel.org/r/20230208205318.131385-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: Fix pin assignment calculation

2023-01-24T06:18:00+00:00

commit 9682b41e52cc9f42f5c33caf410464392adaef04 upstream.

Commit c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin
assignment for UFP receptacles") fixed the pin assignment calculation
to take into account whether the peripheral was a plug or a receptacle.

But the "pin_assignments" sysfs logic was not updated. Address this by
using the macros introduced in the aforementioned commit in the sysfs
logic too.

Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles")
Cc: stable@vger.kernel.org
Cc: Heikki Krogerus 
Signed-off-by: Prashant Malani 
Reviewed-by: Benson Leung 
Reviewed-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230111020546.3384569-2-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: Add pin assignment helper

2023-01-24T06:18:00+00:00

commit 582836e3cfab4faafbdc93bbec96fce036a08ee1 upstream.

The code to extract a peripheral's currently supported Pin Assignments
is repeated in a couple of locations. Factor it out into a separate
function.

This will also make it easier to add fixes (we only need to update 1
location instead of 2).

Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles")
Cc: stable@vger.kernel.org
Cc: Heikki Krogerus 
Signed-off-by: Prashant Malani 
Reviewed-by: Benson Leung 
Reviewed-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20230111020546.3384569-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()

2023-01-18T10:41:22+00:00

[ Upstream commit 0384e87e3fec735e47f1c133c796f32ef7a72a9b ]

I got the following report while doing device(mt6370-tcpc) load
test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:

  OF: ERROR: memory leak, expected refcount 1 instead of 2,
  of_node_get()/of_node_put() unbalanced - destroy cset entry:
  attach overlay node /i2c/pmic@34/tcpc/connector

The 'fwnode' set in tcpci_parse_config() which is called
in tcpci_register_port(), its node refcount is increased
in device_get_named_child_node(). It needs be put while
exiting, so call fwnode_handle_put() in the error path of
tcpci_register_port() and in tcpci_unregister_port() to
avoid leak.

Fixes: 5e85a04c8c0d ("usb: typec: add fwnode to tcpc")
Signed-off-by: Yang Yingliang 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20221121062416.1026192-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: typec: Check for ops->exit instead of ops->enter in altmode_exit

2023-01-18T10:41:22+00:00

[ Upstream commit b6ddd180e3d9f92c1e482b3cdeec7dda086b1341 ]

typec_altmode_exit checks if ops->enter is not NULL but then calls
ops->exit a few lines below. Fix that and check for the function
pointer it's about to call instead.

Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Signed-off-by: Sven Peter 
Reviewed-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20221114165924.33487-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles

2022-09-15T10:04:52+00:00

commit c1e5c2f0cb8a22ec2e14af92afc7006491bebabb upstream.

Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.

According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.

For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:

        dp->alt->vdo=0x140045

The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.

This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.

To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Co-developed-by: Pablo Sun 
Co-developed-by: Macpaul Lin 
Reviewed-by: Guillaume Ranquet 
Reviewed-by: Heikki Krogerus 
Signed-off-by: Pablo Sun 
Signed-off-by: Macpaul Lin 
Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: add missing uevent when partner support PD

2022-07-21T18:59:28+00:00

commit 6fb9e1d94789e8ee5a258a23bc588693f743fd6c upstream.

System like Android allow user control power role from UI, it is possible
to implement application base on typec uevent to refresh UI, but found
there is chance that UI show different state from typec attribute file.

In typec_set_pwr_opmode(), when partner support PD, there is no uevent
send to user space which cause the problem.

Fix it by sending uevent notification when change power mode to PD.

Fixes: bdecb33af34f ("usb: typec: API for controlling USB Type-C Multiplexers")
Cc: stable@vger.kernel.org
Signed-off-by: Linyu Yuan 
Link: https://lore.kernel.org/r/1656662934-10226-1-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci: Don't skip cleanup in .remove() on error

2022-05-18T07:47:27+00:00

commit bbc126ae381cf0a27822c1f822d0aeed74cc40d9 upstream.

Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.

In this case the remove callback even returns early without stopping the
tcpm worker thread and various timers. A work scheduled on the work
queue, or a firing timer after tcpci_remove() returned probably results
in a use-after-free situation because the regmap and driver data were
freed. So better make sure that tcpci_unregister_port() is called even
if disabling the irq failed.

Also emit a more specific error message instead of the i2c core's
"remove failed (EIO), will be ignored" and return 0 to suppress the
core's warning.

This patch is (also) a preparation for making i2c remove callbacks
return void.

Fixes: 3ba76256fc4e ("usb: typec: tcpci: mask event interrupts when remove driver")
Signed-off-by: Uwe Kleine-König 
Cc: stable 
Acked-by: Heikki Krogerus 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20220502080456.21568-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: Fix role swapping

2022-05-09T07:03:22+00:00

commit eb5d7ff3cf0d55093c619b5ad107cd5c05ce8134 upstream.

All attempts to swap the roles timed out because the
completion was done without releasing the port lock. Fixing
that by releasing the lock before starting to wait for the
completion.

Link: https://lore.kernel.org/linux-usb/037de7ac-e210-bdf5-ec7a-8c0c88a0be20@gmail.com/
Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Jia-Ju Bai 
Signed-off-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20220405134824.68067-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

ucsi_ccg: Check DEV_INT bit only when starting CCG4

2022-02-01T16:24:35+00:00

commit 825911492eb15bf8bb7fb94bc0c0421fe7a6327d upstream.

CCGx clears Bit 0:Device Interrupt in the INTR_REG
if CCGx is reset successfully. However, there might
be a chance that other bits in INTR_REG are not
cleared due to internal data queued in PPM. This case
misleads the driver that CCGx reset failed.

The commit checks bit 0 in INTR_REG and ignores other
bits. The ucsi driver would reset PPM later.

Fixes: 247c554a14aa ("usb: typec: ucsi: add support for Cypress CCGx")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus 
Signed-off-by: Sing-Han Chen 
Signed-off-by: Wayne Chang 
Link: https://lore.kernel.org/r/20220112094143.628610-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman