linux-stable.git/drivers/usb/typec, branch linux-6.16.y Linux kernel stable tree usb: typec: tcpm: properly deliver cable vdms to altmode drivers 2025-09-19T14:37:39+00:00 RD Babiera rdbabiera@google.com 2025-08-21T20:37:57+00:00 6958b4577438369806006ac4afff1010c6c995f8 commit f34bfcc77b18375a87091c289c2eb53c249787b4 upstream. tcpm_handle_vdm_request delivers messages to the partner altmode or the cable altmode depending on the SVDM response type, which is incorrect. The partner or cable should be chosen based on the received message type instead. Also add this filter to ADEV_NOTIFY_USB_AND_QUEUE_VDM, which is used when the Enter Mode command is responded to by a NAK on SOP or SOP' and when the Exit Mode command is responded to by an ACK on SOP. Fixes: 7e7877c55eb1 ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250821203759.1720841-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f34bfcc77b18375a87091c289c2eb53c249787b4 upstream.

tcpm_handle_vdm_request delivers messages to the partner altmode or the
cable altmode depending on the SVDM response type, which is incorrect.
The partner or cable should be chosen based on the received message type
instead.

Also add this filter to ADEV_NOTIFY_USB_AND_QUEUE_VDM, which is used when
the Enter Mode command is responded to by a NAK on SOP or SOP' and when
the Exit Mode command is responded to by an ACK on SOP.

Fixes: 7e7877c55eb1 ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250821203759.1720841-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: maxim_contaminant: re-enable cc toggle if cc is open and port is clean 2025-08-28T14:34:41+00:00 Amit Sunil Dhamne amitsd@google.com 2025-08-15T18:31:52+00:00 c151e1644d727ad1f90fb30ef6544dfea92128b7 commit a381c6d6f646226924809d0ad01a9465786da463 upstream. Presently in `max_contaminant_is_contaminant()` if there's no contaminant detected previously, CC is open & stopped toggling and no contaminant is currently present, TCPC.RC would be programmed to do DRP toggling. However, it didn't actively look for a connection. This would lead to Type-C not detect *any* new connections. Hence, in the above situation, re-enable toggling & program TCPC to look for a new connection. Also, return early if TCPC was looking for connection as this indicates TCPC has neither detected a potential connection nor a change in contaminant state. In addition, once dry detection is complete (port is dry), restart toggling. Fixes: 02b332a06397e ("usb: typec: maxim_contaminant: Implement check_contaminant callback") Cc: stable <stable@kernel.org> Signed-off-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-2-6c8d6c3adafb@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a381c6d6f646226924809d0ad01a9465786da463 upstream.

Presently in `max_contaminant_is_contaminant()` if there's no
contaminant detected previously, CC is open & stopped toggling and no
contaminant is currently present, TCPC.RC would be programmed to do DRP
toggling. However, it didn't actively look for a connection. This would
lead to Type-C not detect *any* new connections. Hence, in the above
situation, re-enable toggling & program TCPC to look for a new
connection.

Also, return early if TCPC was looking for connection as this indicates
TCPC has neither detected a potential connection nor a change in
contaminant state.

In addition, once dry detection is complete (port is dry), restart
toggling.

Fixes: 02b332a06397e ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-2-6c8d6c3adafb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: maxim_contaminant: disable low power mode when reading comparator values 2025-08-28T14:34:41+00:00 Amit Sunil Dhamne amitsd@google.com 2025-08-15T18:31:51+00:00 90baa40c68f79f79cbd346724825017ade21df95 commit cabb6c5f4d9e7f49bdf8c0a13c74bd93ee35f45a upstream. Low power mode is enabled when reading CC resistance as part of `max_contaminant_read_resistance_kohm()` and left in that state. However, it's supposed to work with 1uA current source. To read CC comparator values current source is changed to 80uA. This causes a storm of CC interrupts as it (falsely) detects a potential contaminant. To prevent this, disable low power mode current sourcing before reading comparator values. Fixes: 02b332a06397 ("usb: typec: maxim_contaminant: Implement check_contaminant callback") Cc: stable <stable@kernel.org> Signed-off-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/stable/20250814-fix-upstream-contaminant-v1-1-801ce8089031%40google.com Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-1-6c8d6c3adafb@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cabb6c5f4d9e7f49bdf8c0a13c74bd93ee35f45a upstream.

Low power mode is enabled when reading CC resistance as part of
`max_contaminant_read_resistance_kohm()` and left in that state.
However, it's supposed to work with 1uA current source. To read CC
comparator values current source is changed to 80uA. This causes a storm
of CC interrupts as it (falsely) detects a potential contaminant. To
prevent this, disable low power mode current sourcing before reading
comparator values.

Fixes: 02b332a06397 ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/stable/20250814-fix-upstream-contaminant-v1-1-801ce8089031%40google.com
Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-1-6c8d6c3adafb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: fusb302: cache PD RX state 2025-08-20T16:41:37+00:00 Sebastian Reichel sebastian.reichel@collabora.com 2025-07-04T17:55:06+00:00 c4264c2aadb38c7382891330f1bc65ffd5a24bd6 commit 1e61f6ab08786d66a11cfc51e13d6f08a6b06c56 upstream. This patch fixes a race condition communication error, which ends up in PD hard resets when losing the race. Some systems, like the Radxa ROCK 5B are powered through USB-C without any backup power source and use a FUSB302 chip to do the PD negotiation. This means it is quite important to avoid hard resets, since that effectively kills the system's power-supply. I've found the following race condition while debugging unplanned power loss during booting the board every now and then: 1. lots of TCPM/FUSB302/PD initialization stuff 2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here) 3. the remote PD source does not send anything, so TCPM does a SOFT RESET 4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time (tcpm_set_pd_rx is enabled again, even though it is still on) At this point I've seen broken CRC good messages being send by the FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like messages are being lost and things generally going haywire with one of the two sides doing a hard reset once a broken CRC good message was send to the bus. I think the system is running into a race condition, that the FIFOs are being cleared and/or the automatic good CRC message generation flag is being updated while a message is already arriving. Let's avoid this by caching the PD RX enabled state, as we have already processed anything in the FIFOs and are in a good state. As a side effect that this also optimizes I2C bus usage :) As far as I can tell the problem theoretically also exists when TCPM enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less critical for the following reason: On devices like the ROCK 5B, which are powered through a TCPM backed USB-C port, the bootloader must have done some prior PD communication (initial communication must happen within 5 seconds after plugging the USB-C plug). This means the first time the kernel TCPM state machine reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages actively. On other devices a hard reset simply adds some extra delay and things should be good afterwards. Fixes: c034a43e72dda ("staging: typec: Fairchild FUSB302 Type-c chip driver") Cc: stable <stable@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250704-fusb302-race-condition-fix-v1-1-239012c0e27a@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1e61f6ab08786d66a11cfc51e13d6f08a6b06c56 upstream.

This patch fixes a race condition communication error, which ends up in
PD hard resets when losing the race. Some systems, like the Radxa ROCK
5B are powered through USB-C without any backup power source and use a
FUSB302 chip to do the PD negotiation. This means it is quite important
to avoid hard resets, since that effectively kills the system's
power-supply.

I've found the following race condition while debugging unplanned power
loss during booting the board every now and then:

1. lots of TCPM/FUSB302/PD initialization stuff
2. TCPM ends up in SNK_WAIT_CAPABILITIES (tcpm_set_pd_rx is enabled here)
3. the remote PD source does not send anything, so TCPM does a SOFT RESET
4. TCPM ends up in SNK_WAIT_CAPABILITIES for the second time
   (tcpm_set_pd_rx is enabled again, even though it is still on)

At this point I've seen broken CRC good messages being send by the
FUSB302 with a logic analyzer sniffing the CC lines. Also it looks like
messages are being lost and things generally going haywire with one of
the two sides doing a hard reset once a broken CRC good message was send
to the bus.

I think the system is running into a race condition, that the FIFOs are
being cleared and/or the automatic good CRC message generation flag is
being updated while a message is already arriving.

Let's avoid this by caching the PD RX enabled state, as we have already
processed anything in the FIFOs and are in a good state. As a side
effect that this also optimizes I2C bus usage :)

As far as I can tell the problem theoretically also exists when TCPM
enters SNK_WAIT_CAPABILITIES the first time, but I believe this is less
critical for the following reason:

On devices like the ROCK 5B, which are powered through a TCPM backed
USB-C port, the bootloader must have done some prior PD communication
(initial communication must happen within 5 seconds after plugging the
USB-C plug). This means the first time the kernel TCPM state machine
reaches SNK_WAIT_CAPABILITIES, the remote side is not sending messages
actively. On other devices a hard reset simply adds some extra delay and
things should be good afterwards.

Fixes: c034a43e72dda ("staging: typec: Fairchild FUSB302 Type-c chip driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704-fusb302-race-condition-fix-v1-1-239012c0e27a@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Update power_supply on power role change 2025-08-20T16:41:37+00:00 Myrrh Periwinkle myrrhperiwinkle@qtmlabs.xyz 2025-07-21T06:32:51+00:00 5dfc6cb297bc763d994fef905a839fbbeb6bab17 commit 7616f006db07017ef5d4ae410fca99279aaca7aa upstream. The current power direction of an USB-C port also influences the power_supply's online status, so a power role change should also update the power_supply. Fixes an issue on some systems where plugging in a normal USB device in for the first time after a reboot will cause upower to erroneously consider the system to be connected to AC power. Cc: stable <stable@kernel.org> Fixes: 0e6371fbfba3 ("usb: typec: ucsi: Report power supply changes") Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250721-fix-ucsi-pwr-dir-notify-v1-1-e53d5340cb38@qtmlabs.xyz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7616f006db07017ef5d4ae410fca99279aaca7aa upstream.

The current power direction of an USB-C port also influences the
power_supply's online status, so a power role change should also update
the power_supply.

Fixes an issue on some systems where plugging in a normal USB device in
for the first time after a reboot will cause upower to erroneously
consider the system to be connected to AC power.

Cc: stable <stable@kernel.org>
Fixes: 0e6371fbfba3 ("usb: typec: ucsi: Report power supply changes")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250721-fix-ucsi-pwr-dir-notify-v1-1-e53d5340cb38@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: intel_pmc_mux: Defer probe if SCU IPC isn't present 2025-08-20T16:41:03+00:00 Tomasz Michalec tmichalec@google.com 2025-06-10T15:40:58+00:00 46ae288b375ff6bcb10214047092330e3027809c [ Upstream commit df9a825f330e76c72d1985bc9bdc4b8981e3d15f ] If pmc_usb_probe is called before SCU IPC is registered, pmc_usb_probe will fail. Return -EPROBE_DEFER when pmc_usb_probe doesn't get SCU IPC device, so the probe function can be called again after SCU IPC is initialized. Signed-off-by: Tomasz Michalec <tmichalec@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250610154058.1859812-1-tmichalec@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit df9a825f330e76c72d1985bc9bdc4b8981e3d15f ]

If pmc_usb_probe is called before SCU IPC is registered, pmc_usb_probe
will fail.

Return -EPROBE_DEFER when pmc_usb_probe doesn't get SCU IPC device, so
the probe function can be called again after SCU IPC is initialized.

Signed-off-by: Tomasz Michalec <tmichalec@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250610154058.1859812-1-tmichalec@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: typec: tcpm/tcpci_maxim: fix irq wake usage 2025-08-20T16:40:58+00:00 André Draszik andre.draszik@linaro.org 2025-07-07T10:50:27+00:00 021934fae309e0ee3ad4058946b5b9be58603f88 [ Upstream commit 31611223fb34a3e9320cdfc4f4395072a13ea78e ] This driver calls enable_irq_wake() during probe() unconditionally, and never issues the required corresponding disable_irq_wake() to disable hardware interrupt wakeup signals. Additionally, whether or not a device should wake-up the system is meant to be a policy decision based on sysfs (.../power/wakeup) in the first place. Update the driver to use the standard approach to enable/disable IRQ wake during the suspend/resume callbacks. This solves both issues described above. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20250707-max77759-irq-wake-v1-1-d367f633e4bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 31611223fb34a3e9320cdfc4f4395072a13ea78e ]

This driver calls enable_irq_wake() during probe() unconditionally, and
never issues the required corresponding disable_irq_wake() to disable
hardware interrupt wakeup signals.

Additionally, whether or not a device should wake-up the system is
meant to be a policy decision based on sysfs (.../power/wakeup) in the
first place.

Update the driver to use the standard approach to enable/disable IRQ
wake during the suspend/resume callbacks. This solves both issues
described above.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250707-max77759-irq-wake-v1-1-d367f633e4bc@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: typec: ucsi: Add poll_cci operation to cros_ec_ucsi 2025-08-20T16:40:58+00:00 Jameson Thies jthies@google.com 2025-07-11T20:20:33+00:00 4c868aa8d5160cec3c5dca949f9d80783164dd09 [ Upstream commit 300386d117a98961fc1d612d1f1a61997d731b8a ] cros_ec_ucsi fails to allocate a UCSI instance in it's probe function because it does not define all operations checked by ucsi_create. Update cros_ec_ucsi operations to use the same function for read_cci and poll_cci. Signed-off-by: Jameson Thies <jthies@google.com> Reviewed-by: Benson Leung <bleung@chromium.org> Link: https://lore.kernel.org/r/20250711202033.2201305-1-jthies@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 300386d117a98961fc1d612d1f1a61997d731b8a ]

cros_ec_ucsi fails to allocate a UCSI instance in it's probe function
because it does not define all operations checked by ucsi_create.
Update cros_ec_ucsi operations to use the same function for read_cci
and poll_cci.

Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20250711202033.2201305-1-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default 2025-08-20T16:40:57+00:00 Benson Leung bleung@chromium.org 2025-07-17T20:08:05+00:00 506964da926268daa140a8e9e41ff10756abc26d [ Upstream commit af833e7f7db3cf4c82f063668e1b52297a30ec18 ] ucsi_psy_get_current_max would return 0mA as the maximum current if UCSI detected a BC or a Default USB Power sporce. The comment in this function is true that we can't tell the difference between DCP/CDP or SDP chargers, but we can guarantee that at least 1-unit of USB 1.1/2.0 power is available, which is 100mA, which is a better fallback value than 0, which causes some userspaces, including the ChromeOS power manager, to regard this as a power source that is not providing any power. In reality, 100mA is guaranteed from all sources in these classes. Signed-off-by: Benson Leung <bleung@chromium.org> Reviewed-by: Jameson Thies <jthies@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20250717200805.3710473-1-bleung@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit af833e7f7db3cf4c82f063668e1b52297a30ec18 ]

ucsi_psy_get_current_max would return 0mA as the maximum current if
UCSI detected a BC or a Default USB Power sporce.

The comment in this function is true that we can't tell the difference
between DCP/CDP or SDP chargers, but we can guarantee that at least 1-unit
of USB 1.1/2.0 power is available, which is 100mA, which is a better
fallback value than 0, which causes some userspaces, including the ChromeOS
power manager, to regard this as a power source that is not providing
any power.

In reality, 100mA is guaranteed from all sources in these classes.

Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250717200805.3710473-1-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: typec: ucsi: yoga-c630: fix error and remove paths 2025-08-15T14:38:28+00:00 Dmitry Baryshkov dmitry.baryshkov@oss.qualcomm.com 2025-06-21T18:12:56+00:00 7f6908189f72e7d832cd332742e6270b05748a64 [ Upstream commit 168c3896f32e78e7b87f6aa9e85af36e47a9f96c ] Fix memory leak and call ucsi_destroy() from the driver's remove function and probe's error path in order to remove debugfs files and free the memory. Also call yoga_c630_ec_unregister_notify() in the probe's error path. Fixes: 2ea6d07efe53 ("usb: typec: ucsi: add Lenovo Yoga C630 glue driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250621-c630-ucsi-v1-1-a86de5e11361@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 168c3896f32e78e7b87f6aa9e85af36e47a9f96c ]

Fix memory leak and call ucsi_destroy() from the driver's remove
function and probe's error path in order to remove debugfs files and
free the memory. Also call yoga_c630_ec_unregister_notify() in the
probe's error path.

Fixes: 2ea6d07efe53 ("usb: typec: ucsi: add Lenovo Yoga C630 glue driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250621-c630-ucsi-v1-1-a86de5e11361@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>