linux-stable.git/drivers/usb/typec/ucsi, branch v6.2 Linux kernel stable tree usb: typec: ucsi: Don't attempt to resume the ports before they exist 2023-02-02T10:27:28+00:00 Heikki Krogerus heikki.krogerus@linux.intel.com 2023-01-31T14:15:18+00:00 f82060da749c611ed427523b6d1605d87338aac1 This will fix null pointer dereference that was caused by the driver attempting to resume ports that were not yet registered. Fixes: e0dced9c7d47 ("usb: typec: ucsi: Resume in separate work") Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216697 Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230131141518.78215-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This will fix null pointer dereference that was caused by
the driver attempting to resume ports that were not yet
registered.

Fixes: e0dced9c7d47 ("usb: typec: ucsi: Resume in separate work")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216697
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230131141518.78215-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: ucsi: Ensure connector delayed work items are flushed 2023-01-17T16:06:18+00:00 Jack Pham quic_jackp@quicinc.com 2023-01-10T07:12:18+00:00 fac4b8633fd682ecc8e9cff61cb3e33374a1c7e5 During ucsi_unregister() when destroying a connector's workqueue, there may still be pending delayed work items that haven't been scheduled yet. Because queue_delayed_work() uses a separate timer to schedule a work item, the destroy_workqueue() call is not aware of any pending items. Hence when a pending item's timer expires it would then try to queue on a dangling workqueue pointer. Fix this by keeping track of all work items in a list, so that prior to destroying the workqueue any pending items can be flushed. Do this by calling mod_delayed_work() as that will cause pending items to get queued immediately, which then allows the ensuing destroy_workqueue() to implicitly drain all currently queued items to completion and free themselves. Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking") Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Co-developed-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Jack Pham <quic_jackp@quicinc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230110071218.26261-1-quic_jackp@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
During ucsi_unregister() when destroying a connector's workqueue, there
may still be pending delayed work items that haven't been scheduled yet.
Because queue_delayed_work() uses a separate timer to schedule a work
item, the destroy_workqueue() call is not aware of any pending items.
Hence when a pending item's timer expires it would then try to queue on
a dangling workqueue pointer.

Fix this by keeping track of all work items in a list, so that prior to
destroying the workqueue any pending items can be flushed.  Do this by
calling mod_delayed_work() as that will cause pending items to get
queued immediately, which then allows the ensuing destroy_workqueue() to
implicitly drain all currently queued items to completion and free
themselves.

Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Co-developed-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Jack Pham <quic_jackp@quicinc.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230110071218.26261-1-quic_jackp@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Resume in separate work 2022-11-29T07:56:08+00:00 Heikki Krogerus heikki.krogerus@linux.intel.com 2022-11-23T09:30:21+00:00 e0dced9c7d4763fd97c86a13902d135f03cc42eb It can take more than one second to check each connector when the system is resumed. So if you have, say, eight connectors, it may take eight seconds for ucsi_resume() to finish. That's a bit too much. This will modify ucsi_resume() so that it schedules a work where the interface is actually resumed instead of checking the connectors directly. The connections will also be checked in separate tasks which are queued for each connector separately. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216706 Fixes: 99f6d4361113 ("usb: typec: ucsi: Check the connection on resume") Cc: <stable@vger.kernel.org> Reported-by: Todd Brandt <todd.e.brandt@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221123093021.25981-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
It can take more than one second to check each connector
when the system is resumed. So if you have, say, eight
connectors, it may take eight seconds for ucsi_resume() to
finish. That's a bit too much.

This will modify ucsi_resume() so that it schedules a work
where the interface is actually resumed instead of checking
the connectors directly. The connections will also be
checked in separate tasks which are queued for each connector
separately.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216706
Fixes: 99f6d4361113 ("usb: typec: ucsi: Check the connection on resume")
Cc: <stable@vger.kernel.org>
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221123093021.25981-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi/ucsi_ccg: Convert to i2c's .probe_new() 2022-11-22T16:33:26+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2022-11-18T22:45:17+00:00 d24182b10cd5c734499c6185e9c63403ee1de5ac The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-584-uwe@kleine-koenig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-584-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: stm32g0: Convert to i2c's .probe_new() 2022-11-22T16:33:26+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2022-11-18T22:45:18+00:00 05b2e347a58385b8b00051fef61f10a512b5aa20 The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-585-uwe@kleine-koenig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-585-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: acpi: Implement resume callback 2022-10-22T10:39:01+00:00 Heikki Krogerus heikki.krogerus@linux.intel.com 2022-10-07T10:09:51+00:00 4e3a50293c2b21961f02e1afa2f17d3a1a90c7c8 The ACPI driver needs to resume the interface by calling ucsi_resume(). Otherwise we may fail to detect connections and disconnections that happen while the system is suspended. Link: https://bugzilla.kernel.org/show_bug.cgi?id=210425 Fixes: a94ecde41f7e ("usb: typec: ucsi: ccg: enable runtime pm support") Cc: <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221007100951.43798-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The ACPI driver needs to resume the interface by calling
ucsi_resume(). Otherwise we may fail to detect connections
and disconnections that happen while the system is
suspended.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=210425
Fixes: a94ecde41f7e ("usb: typec: ucsi: ccg: enable runtime pm support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221007100951.43798-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: ucsi: Check the connection on resume 2022-10-22T10:39:01+00:00 Heikki Krogerus heikki.krogerus@linux.intel.com 2022-10-07T10:09:50+00:00 99f6d43611135bd6f211dec9e88bb41e4167e304 Checking the connection status of every port on resume. This fixes an issue where the partner device is not unregistered properly after resume if it was unplugged while the system was suspended. The function ucsi_check_connection() is also modified so that it can be used also for registering the connection on top of unregistering it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=210425 Fixes: a94ecde41f7e ("usb: typec: ucsi: ccg: enable runtime pm support") Cc: <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221007100951.43798-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Checking the connection status of every port on resume. This
fixes an issue where the partner device is not unregistered
properly after resume if it was unplugged while the system
was suspended.

The function ucsi_check_connection() is also modified so
that it can be used also for registering the connection on
top of unregistering it.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=210425
Fixes: a94ecde41f7e ("usb: typec: ucsi: ccg: enable runtime pm support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221007100951.43798-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2022-10-07T23:48:26+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-10-07T23:48:26+00:00 d3dcbe24a0fc6373ce7e4a65acd5c785aa8e2396 Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ... 
Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.

  Nothing major in here, lots of little things with new devices
  supported and updates for a few drivers. Highlights include:

   - thunderbolt/USB4 devices supported a bit better than before, and
     some new ids to enable new hardware devices

   - USB gadget uvc updates for newer video formats and better v4l
     integration (the v4l portions were acked by those maintainers)

   - typec updates for tiny issues and more typec drivers for new chips.

   - xhci tiny updates for minor issues

   - big usb-serial ftdi_sio driver update to handle new devices better

   - lots of tiny dwc3 fixes and updates for the IP block that is
     showing up everywhere these days

   - dts updates for new devices being supported

   - other tiny janitorial and cleanups fixes for lots of different USB
     drivers. Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
  usb: gadget: uvc: don't put item still in use
  usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video()
  usb: host: ehci-exynos: switch to using gpiod API
  Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
  Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present""
  dt-bindings: usb: Convert FOTG210 to dt schema
  usb: mtu3: fix failed runtime suspend in host only mode
  USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl"
  usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra
  usb: typec: Replace custom implementation of device_match_fwnode()
  usb: typec: ucsi: Don't warn on probe deferral
  usb: add quirks for Lenovo OneLink+ Dock
  MAINTAINERS: switch dwc3 to Thinh
  usb: idmouse: fix an uninit-value in idmouse_open
  USB: PHY: JZ4770: Switch to use dev_err_probe() helper
  usb: phy: generic: Switch to use dev_err_probe() helper
  usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs
  usb: cdns3: remove dead code
  usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair
  usb: musb: sunxi: Switch to use dev_err_probe() helper
  ...
Merge tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 2022-10-05T01:54:33+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-10-05T01:54:33+00:00 b86406d42ae3c41ae0ce332ea24350829b88af51 Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ... 
Pull i2c updates from Wolfram Sang:

 - 'remove' callback converted to return void. Big change with trivial
   fixes all over the tree. Other subsystems depending on this change
   have been asked to pull an immutable topic branch for this.

 - new driver for Microchip PCI1xxxx switch

 - heavy refactoring of the Mellanox BlueField driver

 - we prefer async probe in the i801 driver now

 - the rest is usual driver updates (support for more SoCs, some
   refactoring, some feature additions)

* tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
  i2c: pci1xxxx: prevent signed integer overflow
  i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  i2c: i801: Prefer async probe
  i2c: designware-pci: Use standard pattern for memory allocation
  i2c: designware-pci: Group AMD NAVI quirk parts together
  i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
  docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED
  i2c: mlxbf: remove device tree support
  i2c: mlxbf: support BlueField-3 SoC
  i2c: cadence: Add standard bus recovery support
  i2c: mlxbf: add multi slave functionality
  i2c: mlxbf: support lock mechanism
  macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change
  i2c: riic: Use devm_platform_ioremap_resource()
  i2c: mlxbf: remove IRQF_ONESHOT
  dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c
  dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support
  i2c: tegra: Add GPCDMA support
  i2c: scmi: Convert to be a platform driver
  i2c: rk3x: Add rv1126 support
  ...
usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra 2022-09-30T11:55:32+00:00 Sing-Han Chen singhanc@nvidia.com 2022-09-28T15:08:40+00:00 691f43cbfe631488cc3fe2d01658fd372c9ef0a7 Firmware built for Tegra doesn't support UCSI ALT command and has known issue of reporting wrong capability info. This commit disables UCSI ALT support when reading the capability on Tegra. Signed-off-by: Sing-Han Chen <singhanc@nvidia.com> Signed-off-by: Wayne Chang <waynec@nvidia.com> Link: https://lore.kernel.org/r/20220928150840.3804313-1-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Firmware built for Tegra doesn't support UCSI ALT command and has known
issue of reporting wrong capability info.

This commit disables UCSI ALT support when reading the capability on
Tegra.

Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://lore.kernel.org/r/20220928150840.3804313-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>