linux-stable.git/drivers/usb/typec/Makefile, branch v5.7

usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller

2019-10-04T12:18:48+00:00

Driver for TI HD3SS3220 USB Type-C DRP port controller.

The driver currently registers the port and supports data role swapping.

Signed-off-by: Biju Das 
Acked-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/1567584941-13690-3-git-send-email-biju.das@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: Group all TCPCI/TCPM code together

2018-09-20T11:37:29+00:00

Moving all the drivers that depend on the Port Controller
Manager under a new directory drivers/usb/typec/tcpm/ and
making Guenter Roeck the designated reviewer of that code.

Acked-by: Guenter Roeck 
Signed-off-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

usb: typec: Add driver for DisplayPort alternate mode

2018-07-02T15:42:36+00:00

DisplayPort USB Type-C Alt Mode allows DisplayPort displays
and adapters to be attached to the USB Type-C ports on the
system.

Signed-off-by: Heikki Krogerus 
Tested-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

usb: typec: Bus type for alternate modes

2018-07-02T15:42:36+00:00

Introducing a simple bus for the alternate modes. Bus allows
binding drivers to the discovered alternate modes the
partners support.

Signed-off-by: Heikki Krogerus 
Tested-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

staging: typec: tcpci: move tcpci drivers out of staging

2018-06-28T10:49:48+00:00

Move TCPCI(Typec port controller interface) driver and rt1711h
driver out of staging.

Signed-off-by: Li Jun 
Reviewed-by: Guenter Roeck 
Acked-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

usb: typec: driver for Pericom PI3USB30532 Type-C cross switch

2018-03-22T12:49:28+00:00

Add a driver for the Pericom PI3USB30532 Type-C cross switch /
mux chip found on some devices with a Type-C port.

Signed-off-by: Hans de Goede 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

usb: typec: API for controlling USB Type-C Multiplexers

2018-03-22T12:40:10+00:00

USB Type-C connectors consist of various muxes and switches
that route the pins on the connector to the right locations.
The USB Type-C drivers need to be able to control the muxes,
as they are the ones that know things like the cable plug
orientation, and the current mode that was negotiated with
the partner.

This introduces a small API for registering and controlling
cable plug orientation switches, and separate small API for
registering and controlling pin multiplexer/demultiplexer
switches that are needed with Accessory/Alternate Modes.

Reviewed-by: Hans de Goede 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining Makefiles

2017-11-07T14:53:48+00:00

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

This updates the remaining drivers/usb/*Makefile* that were missing SPDX
identifiers.  They all get the following identifier:
	SPDX-License-Identifier: GPL-2.0

The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.

Cc: Thomas Gleixner 
Cc: Kate Stewart 
Cc: Philippe Ombredanne 
Cc: Peter Korsgaard 
Cc: Thomas Winischhofer 
Cc: Johan Hovold 
Acked-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

usb: typec: driver for TI TPS6598x USB Power Delivery controllers

2017-10-04T07:57:57+00:00

Driver for TI TPS65982, TPS65983 and other TPS6598x family
stand alone USB Power Delivery controllers.

The driver will at this stage only register the port and
partners attached to it, so cables and alternate modes are
not yet registered. Both power and data role swapping is
supported.

Signed-off-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

usb: typec: fusb302: Move out of staging

2017-09-18T08:58:31+00:00

The driver is in good enough shape to be moved out of staging.
Do it.

Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman