linux-stable.git/drivers/usb/storage, branch v6.15

USB: storage: quirk for ADATA Portable HDD CH94

2025-04-11T14:25:58+00:00

Version 1.60 specifically needs this quirk.
Version 2.00 is known good.

Cc: stable 
Signed-off-by: Oliver Neukum 
Link: https://lore.kernel.org/r/20250403180004.343133-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman

treewide: Switch/rename to timer_delete[_sync]()

2025-04-05T08:30:12+00:00

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner 
Signed-off-by: Ingo Molnar

Merge tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2025-04-03T01:23:31+00:00

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for
  6.15-rc1. Included in here are:

   - Thunderbolt driver and core api updates for new hardware and
     features

   - usb-storage const array cleanups

   - typec driver updates

   - dwc3 driver updates

   - xhci driver updates and bugfixes

   - small USB documentation updates

   - usb cdns3 driver updates

   - usb gadget driver updates

   - other small driver updates and fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
  thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
  thunderbolt: Scan retimers after device router has been enumerated
  usb: host: cdns3: forward lost power information to xhci
  usb: host: xhci-plat: allow upper layers to signal power loss
  usb: xhci: change xhci_resume() parameters to explicit the desired info
  usb: cdns3-ti: run HW init at resume() if HW was reset
  usb: cdns3-ti: move reg writes to separate function
  usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
  usb: cdns3: rename hibernated argument of role->resume() to lost_power
  usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
  usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
  usb: dwc3: Don't use %pK through printk
  usb: core: Don't use %pK through printk
  usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
  dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
  usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
  usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
  usb: xhci: Don't change the status of stalled TDs on failed Stop EP
  xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
  xhci: Handle spurious events on Etron host isoc enpoints
  ...

usb: storage: shuttle_usbat: Use const for constant array

2025-03-03T09:24:41+00:00

This array is only read, not modified.

Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.

Signed-off-by: Jonathan Neuschäfer 
Reviewed-by: Alan Stern 
Link: https://lore.kernel.org/r/20250228-misc-const-v3-9-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman

usb: storage: sddr55: Use const for constant arrays

2025-03-03T09:24:41+00:00

These arrays are only read, not modified.

Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.

Signed-off-by: Jonathan Neuschäfer 
Reviewed-by: Alan Stern 
Link: https://lore.kernel.org/r/20250228-misc-const-v3-8-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman

usb: storage: sddr09: Use const for constant arrays

2025-03-03T09:24:41+00:00

The nand_flash_ids, inquiry_response, and mode_page_01 arrays are only
read, not modified.

Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.

Signed-off-by: Jonathan Neuschäfer 
Reviewed-by: Alan Stern 
Link: https://lore.kernel.org/r/20250228-misc-const-v3-7-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman

usb: storage: realtek_cr: Use const for constant arrays

2025-03-03T09:24:41+00:00

These arrays are only read, never modified.

Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.

Signed-off-by: Jonathan Neuschäfer 
Reviewed-by: Alan Stern 
Link: https://lore.kernel.org/r/20250228-misc-const-v3-6-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman

usb: storage: initializers: Use const for constant array

2025-03-03T09:24:41+00:00

init_string is only read, not modified.

Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.

Signed-off-by: Jonathan Neuschäfer 
Reviewed-by: Alan Stern 
Link: https://lore.kernel.org/r/20250228-misc-const-v3-5-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman

usb: storage: datafab: Use const for constant arrays

2025-03-03T09:24:41+00:00

These arrays are only read, not modified.

Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.

Signed-off-by: Jonathan Neuschäfer 
Reviewed-by: Alan Stern 
Link: https://lore.kernel.org/r/20250228-misc-const-v3-4-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman

usb: storage: alauda: Use const for card ID array

2025-03-03T09:24:41+00:00

The alauda_card_ids array is only read, and not modified.

Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.

Signed-off-by: Jonathan Neuschäfer 
Reviewed-by: Alan Stern 
Link: https://lore.kernel.org/r/20250228-misc-const-v3-3-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman