linux-stable.git/drivers/usb/storage, branch v6.0 Linux kernel stable tree uas: ignore UAS for Thinkplus chips 2022-09-27T08:50:29+00:00 Hongling Zeng zenghongling@kylinos.cn 2022-09-23T02:46:35+00:00 0fb9703a3eade0bb84c635705d9c795345e55053 The UAS mode of Thinkplus(0x17ef, 0x3899) is reported to influence performance and trigger kernel panic on several platforms with the following error message: [ 39.702439] xhci_hcd 0000:0c:00.3: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 39.702442] xhci_hcd 0000:0c:00.3: @000000026c61f810 00000000 00000000 1b000000 05038000 [ 720.545894][13] Workqueue: usb_hub_wq hub_event [ 720.550971][13] ffff88026c143c38 0000000000016300 ffff8802755bb900 ffff880 26cb80000 [ 720.559673][13] ffff88026c144000 ffff88026ca88100 0000000000000000 ffff880 26cb80000 [ 720.568374][13] ffff88026cb80000 ffff88026c143c50 ffffffff8186ae25 ffff880 26ca880f8 [ 720.577076][13] Call Trace: [ 720.580201][13] [<ffffffff8186ae25>] schedule+0x35/0x80 [ 720.586137][13] [<ffffffff8186b0ce>] schedule_preempt_disabled+0xe/0x10 [ 720.593623][13] [<ffffffff8186cb94>] __mutex_lock_slowpath+0x164/0x1e0 [ 720.601012][13] [<ffffffff8186cc3f>] mutex_lock+0x2f/0x40 [ 720.607141][13] [<ffffffff8162b8e9>] usb_disconnect+0x59/0x290 Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663902249837086.19.seg@mailgw Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The UAS mode of Thinkplus(0x17ef, 0x3899) is reported to influence
performance and trigger kernel panic on several platforms with the
following error message:

[   39.702439] xhci_hcd 0000:0c:00.3: ERROR Transfer event for disabled
               endpoint or incorrect stream ring
[   39.702442] xhci_hcd 0000:0c:00.3: @000000026c61f810 00000000 00000000
               1b000000 05038000

[  720.545894][13] Workqueue: usb_hub_wq hub_event
[  720.550971][13]  ffff88026c143c38 0000000000016300 ffff8802755bb900 ffff880
                    26cb80000
[  720.559673][13]  ffff88026c144000 ffff88026ca88100 0000000000000000 ffff880
                    26cb80000
[  720.568374][13]  ffff88026cb80000 ffff88026c143c50 ffffffff8186ae25 ffff880
                    26ca880f8
[  720.577076][13] Call Trace:
[  720.580201][13]  [<ffffffff8186ae25>] schedule+0x35/0x80
[  720.586137][13]  [<ffffffff8186b0ce>] schedule_preempt_disabled+0xe/0x10
[  720.593623][13]  [<ffffffff8186cb94>] __mutex_lock_slowpath+0x164/0x1e0
[  720.601012][13]  [<ffffffff8186cc3f>] mutex_lock+0x2f/0x40
[  720.607141][13]  [<ffffffff8162b8e9>] usb_disconnect+0x59/0x290

Falling back to USB mass storage can solve this problem, so ignore UAS
function of this chip.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663902249837086.19.seg@mailgw
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS 2022-09-27T08:50:27+00:00 Hongling Zeng zenghongling@kylinos.cn 2022-09-23T02:46:25+00:00 e00b488e813f0f1ad9f778e771b7cd2fe2877023 The UAS mode of Hiksemi USB_HDD is reported to fail to work on several platforms with the following error message, then after re-connecting the device will be offlined and not working at all. [ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD [ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00 04 00 00 [ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00 00 08 00 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly,so we need to fall-back to usb-storage. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663901185-21067-1-git-send-email-zenghongling@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The UAS mode of Hiksemi USB_HDD is reported to fail to work on several
platforms with the following error message, then after re-connecting the
device will be offlined and not working at all.

[  592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18
                   inflight: CMD
[  592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00
                   04 00 00
[  592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1
                   inflight: CMD
[  592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00
                   00 08 00

These disks have a broken uas implementation, the tag field of the status
iu-s is not set properly,so we need to fall-back to usb-storage.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663901185-21067-1-git-send-email-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uas: add no-uas quirk for Hiksemi usb_disk 2022-09-27T08:50:24+00:00 Hongling Zeng zenghongling@kylinos.cn 2022-09-23T02:46:13+00:00 a625a4b8806cc1e928b7dd2cca1fee709c9de56e The UAS mode of Hiksemi is reported to fail to work on several platforms with the following error message, then after re-connecting the device will be offlined and not working at all. [ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD [ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00 04 00 00 [ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00 00 08 00 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly,so we need to fall-back to usb-storage. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663901173-21020-1-git-send-email-zenghongling@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The UAS mode of Hiksemi is reported to fail to work on several platforms
with the following error message, then after re-connecting the device will
be offlined and not working at all.

[  592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18
                   inflight: CMD
[  592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00
                   04 00 00
[  592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1
                   inflight: CMD
[  592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00
                   00 08 00

These disks have a broken uas implementation, the tag field of the status
iu-s is not set properly,so we need to fall-back to usb-storage.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663901173-21020-1-git-send-email-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: storage: Add ASUS <0x0b05:0x1932> to IGNORE_UAS 2022-09-01T14:06:52+00:00 Hu Xiaoying huxiaoying@kylinos.cn 2022-09-01T04:57:37+00:00 c61feaee68b9735be06f162bc046c7f1959efb0c USB external storage device(0x0b05:1932), use gnome-disk-utility tools to test usb write < 30MB/s. if does not to load module of uas for this device, can increase the write speed from 20MB/s to >40MB/s. Suggested-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hu Xiaoying <huxiaoying@kylinos.cn> Link: https://lore.kernel.org/r/20220901045737.3438046-1-huxiaoying@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
USB external storage device(0x0b05:1932), use gnome-disk-utility tools
to test usb write  < 30MB/s.
if does not to load module of uas for this device, can increase the
write speed from 20MB/s to >40MB/s.

Suggested-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hu Xiaoying <huxiaoying@kylinos.cn>
Link: https://lore.kernel.org/r/20220901045737.3438046-1-huxiaoying@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb-storage: Add ignore-residue quirk for NXP PN7462AU 2022-08-18T15:18:05+00:00 Witold Lipieta witold.lipieta@thaumatec.com 2022-08-09T11:29:11+00:00 2aa48857ad52236a9564c71183d6cc8893becd41 This is USB mass storage primary boot loader for code download on NXP PN7462AU. Without the quirk it is impossible to write whole memory at once as device restarts during the write due to bogus residue values reported. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Witold Lipieta <witold.lipieta@thaumatec.com> Link: https://lore.kernel.org/r/20220809112911.462776-1-witold.lipieta@thaumatec.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This is USB mass storage primary boot loader for code download on
NXP PN7462AU.

Without the quirk it is impossible to write whole memory at once as
device restarts during the write due to bogus residue values reported.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Witold Lipieta <witold.lipieta@thaumatec.com>
Link: https://lore.kernel.org/r/20220809112911.462776-1-witold.lipieta@thaumatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: storage: Fix typo in comment 2022-06-21T14:39:42+00:00 Xiang wangx wangxiang@cdjrlc.com 2022-06-20T10:42:43+00:00 274a12ea4007bf62a3abdc5600f85cd4de678169 Delete the redundant word 'the'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220620104243.4979-1-wangxiang@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Delete the redundant word 'the'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220620104243.4979-1-wangxiang@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: remove third argument of usb_maxpacket() 2022-04-23T08:33:53+00:00 Vincent Mailhol mailhol.vincent@wanadoo.fr 2022-03-17T03:55:11+00:00 dcd2e49b550e928164ccefb5bdf90988ed4df00e The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Duncan Sands <duncan.sands@free.fr> CC: Alan Stern <stern@rowland.harvard.edu> CC: Olav Kongas <ok@artecdesign.ee> CC: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20220317035514.6378-7-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The third argument of usb_maxpacket(): in_out has been deprecated
because it could be derived from the second argument (e.g. using
usb_pipeout(pipe)).

N.B. function usb_maxpacket() was made variadic to accommodate the
transition from the old prototype with three arguments to the new one
with only two arguments (so that no renaming is needed). The variadic
argument is to be removed once all users of usb_maxpacket() get
migrated.

CC: Duncan Sands <duncan.sands@free.fr>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Olav Kongas <ok@artecdesign.ee>
CC: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20220317035514.6378-7-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: storage: karma: fix rio_karma_init return 2022-04-21T17:03:26+00:00 Lin Ma linma@zju.edu.cn 2022-04-12T14:43:59+00:00 b92ffb1eddd9a66a90defc556dcbf65a43c196c7 The function rio_karam_init() should return -ENOMEM instead of value 0 (USB_STOR_TRANSPORT_GOOD) when allocation fails. Similarly, it should return -EIO when rio_karma_send_command() fails. Fixes: dfe0d3ba20e8 ("USB Storage: add rio karma eject support") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20220412144359.28447-1-linma@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The function rio_karam_init() should return -ENOMEM instead of
value 0 (USB_STOR_TRANSPORT_GOOD) when allocation fails.

Similarly, it should return -EIO when rio_karma_send_command() fails.

Fixes: dfe0d3ba20e8 ("USB Storage: add rio karma eject support")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220412144359.28447-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb-storage: isd200: fix initFunction error return 2022-04-21T17:02:42+00:00 Lin Ma linma@zju.edu.cn 2022-04-07T02:21:10+00:00 ba6df3ea68196d54a1e8299cea1bf4565fc755c5 The initFunction is called when probing a new device, its call relation is like: USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources() -> isd200_init_info() That is, the error return of the initFunction should tell USB core what happened instead of using custom error code like ISD200_ERROR. Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20220407022110.3757-1-linma@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The initFunction is called when probing a new device, its call relation
is like:

USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources()
-> isd200_init_info()

That is, the error return of the initFunction should tell USB core what
happened instead of using custom error code like ISD200_ERROR.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220407022110.3757-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb-storage: shuttle_usbat: fix initFunction error return 2022-04-21T17:02:40+00:00 Lin Ma linma@zju.edu.cn 2022-04-07T02:21:15+00:00 1abf67983a4fd74133b3d2b43722704c744621a6 The initFunction is called when probing a new device, its call relation is like: USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources() -> init_usbat_cd() or init_usbat_flash() -> init_usbat() That is, the error return of the initFunction should tell USB core what happened instead of using constant or error code like USB_STOR_TRANSPORT_FAILED. Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20220407022115.3773-1-linma@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The initFunction is called when probing a new device, its call relation
is like:
USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources()
-> init_usbat_cd() or init_usbat_flash() -> init_usbat()

That is, the error return of the initFunction should tell USB core what
happened instead of using constant or error code like
USB_STOR_TRANSPORT_FAILED.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220407022115.3773-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>