linux-stable.git/drivers/usb/storage, branch v4.14.166

USB: uas: heed CAPACITY_HEURISTICS

2019-12-17T19:39:03+00:00

commit 335cbbd5762d5e5c67a8ddd6e6362c2aa42a328f upstream.

There is no need to ignore this flag. We should be as close
to storage in that regard as makes sense, so honor flags whose
cost is tiny.

Signed-off-by: Oliver Neukum 
Cc: stable 
Link: https://lore.kernel.org/r/20191114112758.32747-3-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman

USB: uas: honor flag to avoid CAPACITY16

2019-12-17T19:39:03+00:00

commit bff000cae1eec750d62e265c4ba2db9af57b17e1 upstream.

Copy the support over from usb-storage to get feature parity

Signed-off-by: Oliver Neukum 
Cc: stable 
Link: https://lore.kernel.org/r/20191114112758.32747-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman

usb-storage: Revert commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")

2019-11-06T11:43:29+00:00

commit 9a976949613132977098fc49510b46fa8678d864 upstream.

Commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG
overflows") attempted to solve a problem involving scatter-gather I/O
and USB/IP by setting the virt_boundary_mask for mass-storage devices.

However, it now turns out that this interacts badly with commit
09324d32d2a0 ("block: force an unlimited segment size on queues with a
virt boundary"), which was added later.  A typical error message is:

	ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes),
	total 32768 (slots), used 97 (slots)

There is no longer any reason to keep the virt_boundary_mask setting
for usb-storage.  It was needed in the first place only for handling
devices with a block size smaller than the maxpacket size and where
the host controller was not capable of fully general scatter-gather
operation (that is, able to merge two SG segments into a single USB
packet).  But:

	High-speed or slower connections never use a bulk maxpacket
	value larger than 512;

	The SCSI layer does not handle block devices with a block size
	smaller than 512 bytes;

	All the host controllers capable of SuperSpeed operation can
	handle fully general SG;

	Since commit ea44d190764b ("usbip: Implement SG support to
	vhci-hcd and stub driver") was merged, the USB/IP driver can
	also handle SG.

Therefore all supported device/controller combinations should be okay
with no need for any special virt_boundary_mask.  So in order to fix
the swiotlb problem, this patch reverts commit 747668dbc061.

Reported-and-tested-by: Piergiorgio Sartor 
Link: https://marc.info/?l=linux-usb&m=157134199501202&w=2
Signed-off-by: Alan Stern 
CC: Seth Bollinger 
CC: 
Fixes: 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")
Acked-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910211145520.1673-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman

UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")

2019-11-06T11:43:28+00:00

commit 1186f86a71130a7635a20843e355bb880c7349b2 upstream.

Commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments"),
copying a similar commit for usb-storage, attempted to solve a problem
involving scatter-gather I/O and USB/IP by setting the
virt_boundary_mask for mass-storage devices.

However, it now turns out that the analogous change in usb-storage
interacted badly with commit 09324d32d2a0 ("block: force an unlimited
segment size on queues with a virt boundary"), which was added later.
A typical error message is:

	ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes),
	total 32768 (slots), used 97 (slots)

There is no longer any reason to keep the virt_boundary_mask setting
in the uas driver.  It was needed in the first place only for
handling devices with a block size smaller than the maxpacket size and
where the host controller was not capable of fully general
scatter-gather operation (that is, able to merge two SG segments into
a single USB packet).  But:

	High-speed or slower connections never use a bulk maxpacket
	value larger than 512;

	The SCSI layer does not handle block devices with a block size
	smaller than 512 bytes;

	All the host controllers capable of SuperSpeed operation can
	handle fully general SG;

	Since commit ea44d190764b ("usbip: Implement SG support to
	vhci-hcd and stub driver") was merged, the USB/IP driver can
	also handle SG.

Therefore all supported device/controller combinations should be okay
with no need for any special virt_boundary_mask.  So in order to head
off potential problems similar to those affecting usb-storage, this
patch reverts commit 3ae62a42090f.

Signed-off-by: Alan Stern 
CC: Oliver Neukum 
CC: 
Acked-by: Christoph Hellwig 
Fixes: 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910231132470.1878-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman

USB: storage: ums-realtek: Whitelist auto-delink support

2019-09-06T08:20:57+00:00

commit 1902a01e2bcc3abd7c9a18dc05e78c7ab4a53c54 upstream.

Auto-delink requires writing special registers to ums-realtek devices.
Unconditionally enable auto-delink may break newer devices.

So only enable auto-delink by default for the original three IDs,
0x0138, 0x0158 and 0x0159.

Realtek is working on a patch to properly support auto-delink for other
IDs.

BugLink: https://bugs.launchpad.net/bugs/1838886
Signed-off-by: Kai-Heng Feng 
Acked-by: Alan Stern 
Cc: stable 
Link: https://lore.kernel.org/r/20190827173450.13572-2-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman

USB: storage: ums-realtek: Update module parameter description for auto_delink_en

2019-09-06T08:20:57+00:00

commit f6445b6b2f2bb1745080af4a0926049e8bca2617 upstream.

The option named "auto_delink_en" is a bit misleading, as setting it to
false doesn't really disable auto-delink but let auto-delink be firmware
controlled.

Update the description to reflect the real usage of this parameter.

Signed-off-by: Kai-Heng Feng 
Cc: stable 
Link: https://lore.kernel.org/r/20190827173450.13572-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman

usb-storage: Add new JMS567 revision to unusual_devs

2019-09-06T08:20:55+00:00

commit 08d676d1685c2a29e4d0e1b0242324e564d4589e upstream.

Revision 0x0117 suffers from an identical issue to earlier revisions,
therefore it should be added to the quirks list.

Signed-off-by: Henk van der Laan 
Cc: stable 
Link: https://lore.kernel.org/r/20190816200847.21366-1-opensource@henkvdlaan.com
Signed-off-by: Greg Kroah-Hartman

USB: usb-storage: Add new ID to ums-realtek

2019-06-19T06:20:58+00:00

commit 1a6dd3fea131276a4fc44ae77b0f471b0b473577 upstream.

There is one more Realtek card reader requires ums-realtek to work
correctly.

Add the device ID to support it.

Signed-off-by: Kai-Heng Feng 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

UAS: fix alignment of scatter/gather segments

2019-05-10T15:53:15+00:00

commit 3ae62a42090f1ed48e2313ed256a1182a85fb575 upstream.

This is the UAS version of

747668dbc061b3e62bc1982767a3a1f9815fcf0e
usb-storage: Set virt_boundary_mask to avoid SG overflows

We are not as likely to be vulnerable as storage, as it is unlikelier
that UAS is run over a controller without native support for SG,
but the issue exists.
The issue has been existing since the inception of the driver.

Fixes: 115bb1ffa54c ("USB: Add UAS driver")
Signed-off-by: Oliver Neukum 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usb-storage: Set virt_boundary_mask to avoid SG overflows

2019-05-10T15:53:14+00:00

commit 747668dbc061b3e62bc1982767a3a1f9815fcf0e upstream.

The USB subsystem has always had an unusual requirement for its
scatter-gather transfers: Each element in the scatterlist (except the
last one) must have a length divisible by the bulk maxpacket size.
This is a particular issue for USB mass storage, which uses SG lists
created by the block layer rather than setting up its own.

So far we have scraped by okay because most devices have a logical
block size of 512 bytes or larger, and the bulk maxpacket sizes for
USB 2 and below are all <= 512.  However, USB 3 has a bulk maxpacket
size of 1024.  Since the xhci-hcd driver includes native SG support,
this hasn't mattered much.  But now people are trying to use USB-3
mass storage devices with USBIP, and the vhci-hcd driver currently
does not have full SG support.

The result is an overflow error, when the driver attempts to implement
an SG transfer of 63 512-byte blocks as a single
3584-byte (7 blocks) transfer followed by seven 4096-byte (8 blocks)
transfers.  The device instead sends 31 1024-byte packets followed by
a 512-byte packet, and this overruns the first SG buffer.

Ideally this would be fixed by adding better SG support to vhci-hcd.
But for now it appears we can work around the problem by
asking the block layer to respect the maxpacket limitation, through
the use of the virt_boundary_mask.

Signed-off-by: Alan Stern 
Reported-by: Seth Bollinger 
Tested-by: Seth Bollinger 
CC: Ming Lei 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman