linux-stable.git/drivers/usb/storage, branch linux-6.17.y Linux kernel stable tree usb: uas: fix urb unmapping issue when the uas device is remove during ongoing data transfer 2025-12-06T21:27:38+00:00 Owen Gu guhuinan@xiaomi.com 2025-11-20T12:33:36+00:00 426edbfc88b22601ea34a441a469092e7b301c52 commit 26d56a9fcb2014b99e654127960aa0a48a391e3c upstream. When a UAS device is unplugged during data transfer, there is a probability of a system panic occurring. The root cause is an access to an invalid memory address during URB callback handling. Specifically, this happens when the dma_direct_unmap_sg() function is called within the usb_hcd_unmap_urb_for_dma() interface, but the sg->dma_address field is 0 and the sg data structure has already been freed. The SCSI driver sends transfer commands by invoking uas_queuecommand_lck() in uas.c, using the uas_submit_urbs() function to submit requests to USB. Within the uas_submit_urbs() implementation, three URBs (sense_urb, data_urb, and cmd_urb) are sequentially submitted. Device removal may occur at any point during uas_submit_urbs execution, which may result in URB submission failure. However, some URBs might have been successfully submitted before the failure, and uas_submit_urbs will return the -ENODEV error code in this case. The current error handling directly calls scsi_done(). In the SCSI driver, this eventually triggers scsi_complete() to invoke scsi_end_request() for releasing the sgtable. The successfully submitted URBs, when being unlinked to giveback, call usb_hcd_unmap_urb_for_dma() in hcd.c, leading to exceptions during sg unmapping operations since the sg data structure has already been freed. This patch modifies the error condition check in the uas_submit_urbs() function. When a UAS device is removed but one or more URBs have already been successfully submitted to USB, it avoids immediately invoking scsi_done() and save the cmnd to devinfo->cmnd array. If the successfully submitted URBs is completed before devinfo->resetting being set, then the scsi_done() function will be called within uas_try_complete() after all pending URB operations are finalized. Otherwise, the scsi_done() function will be called within uas_zap_pending(), which is executed after usb_kill_anchored_urbs(). The error handling only takes effect when uas_queuecommand_lck() calls uas_submit_urbs() and returns the error value -ENODEV . In this case, the device is disconnected, and the flow proceeds to uas_disconnect(), where uas_zap_pending() is invoked to call uas_try_complete(). Fixes: eb2a86ae8c54 ("USB: UAS: fix disconnect by unplugging a hub") Cc: stable <stable@kernel.org> Signed-off-by: Yu Chen <chenyu45@xiaomi.com> Signed-off-by: Owen Gu <guhuinan@xiaomi.com> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20251120123336.3328-1-guhuinan@xiaomi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 26d56a9fcb2014b99e654127960aa0a48a391e3c upstream.

When a UAS device is unplugged during data transfer, there is
a probability of a system panic occurring. The root cause is
an access to an invalid memory address during URB callback handling.
Specifically, this happens when the dma_direct_unmap_sg() function
is called within the usb_hcd_unmap_urb_for_dma() interface, but the
sg->dma_address field is 0 and the sg data structure has already been
freed.

The SCSI driver sends transfer commands by invoking uas_queuecommand_lck()
in uas.c, using the uas_submit_urbs() function to submit requests to USB.
Within the uas_submit_urbs() implementation, three URBs (sense_urb,
data_urb, and cmd_urb) are sequentially submitted. Device removal may
occur at any point during uas_submit_urbs execution, which may result
in URB submission failure. However, some URBs might have been successfully
submitted before the failure, and uas_submit_urbs will return the -ENODEV
error code in this case. The current error handling directly calls
scsi_done(). In the SCSI driver, this eventually triggers scsi_complete()
to invoke scsi_end_request() for releasing the sgtable. The successfully
submitted URBs, when being unlinked to giveback, call
usb_hcd_unmap_urb_for_dma() in hcd.c, leading to exceptions during sg
unmapping operations since the sg data structure has already been freed.

This patch modifies the error condition check in the uas_submit_urbs()
function. When a UAS device is removed but one or more URBs have already
been successfully submitted to USB, it avoids immediately invoking
scsi_done() and save the cmnd to devinfo->cmnd array. If the successfully
submitted URBs is completed before devinfo->resetting being set, then
the scsi_done() function will be called within uas_try_complete() after
all pending URB operations are finalized. Otherwise, the scsi_done()
function will be called within uas_zap_pending(), which is executed after
usb_kill_anchored_urbs().

The error handling only takes effect when uas_queuecommand_lck() calls
uas_submit_urbs() and returns the error value -ENODEV . In this case,
the device is disconnected, and the flow proceeds to uas_disconnect(),
where uas_zap_pending() is invoked to call uas_try_complete().

Fixes: eb2a86ae8c54 ("USB: UAS: fix disconnect by unplugging a hub")
Cc: stable <stable@kernel.org>
Signed-off-by: Yu Chen <chenyu45@xiaomi.com>
Signed-off-by: Owen Gu <guhuinan@xiaomi.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20251120123336.3328-1-guhuinan@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: storage: sddr55: Reject out-of-bound new_pba 2025-12-06T21:27:38+00:00 Tianchu Chen flynnnchen@tencent.com 2025-11-16T04:46:18+00:00 5ebe8d479aaf4f41ac35e6955332304193c646f6 commit b59d4fda7e7d0aff1043a7f742487cb829f5aac1 upstream. Discovered by Atuin - Automated Vulnerability Discovery Engine. new_pba comes from the status packet returned after each write. A bogus device could report values beyond the block count derived from info->capacity, letting the driver walk off the end of pba_to_lba[] and corrupt heap memory. Reject PBAs that exceed the computed block count and fail the transfer so we avoid touching out-of-range mapping entries. Signed-off-by: Tianchu Chen <flynnnchen@tencent.com> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/B2DC73A3EE1E3A1D+202511161322001664687@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b59d4fda7e7d0aff1043a7f742487cb829f5aac1 upstream.

Discovered by Atuin - Automated Vulnerability Discovery Engine.

new_pba comes from the status packet returned after each write.
A bogus device could report values beyond the block count derived
from info->capacity, letting the driver walk off the end of
pba_to_lba[] and corrupt heap memory.

Reject PBAs that exceed the computed block count and fail the
transfer so we avoid touching out-of-range mapping entries.

Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/B2DC73A3EE1E3A1D+202511161322001664687@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: storage: Remove subclass and protocol overrides from Novatek quirk 2025-12-06T21:27:38+00:00 Alan Stern stern@rowland.harvard.edu 2025-11-21T21:29:34+00:00 96ada13ff2241ea436971b6be9a82c3c4feaa49c commit df5fde297e617041449f603ed5f646861c80000b upstream. A report from Oleg Smirnov indicates that the unusual_devs quirks entry for the Novatek camera does not need to override the subclass and protocol parameters: [3266355.209532] usb 1-3: new high-speed USB device number 10 using xhci_hcd [3266355.333031] usb 1-3: New USB device found, idVendor=0603, idProduct=8611, bcdDevice= 1.00 [3266355.333040] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [3266355.333043] usb 1-3: Product: YICARCAM [3266355.333045] usb 1-3: Manufacturer: XIAO-YI [3266355.333047] usb 1-3: SerialNumber: 966110000000100 [3266355.338621] usb-storage 1-3:1.0: USB Mass Storage device detected [3266355.338817] usb-storage 1-3:1.0: Quirks match for vid 0603 pid 8611: 4000 [3266355.338821] usb-storage 1-3:1.0: This device (0603,8611,0100 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h (kernel 6.16.10-arch1-1) Please send a copy of this message to <linux-usb@vger.kernel.org> and <usb-storage@lists.one-eyed-alien.net> The overrides are harmless but they do provoke the driver into logging this annoying message. Update the entry to remove the unneeded entries. Reported-by: stealth <oleg.smirnov.1988@gmail.com> Closes: https://lore.kernel.org/CAKxjRRxhC0s19iEWoN=pEMqXJ_z8w_moC0GCXSqSKCcOddnWjQ@mail.gmail.com/ Fixes: 6ca8af3c8fb5 ("USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera") Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/b440f177-f0b8-4d5a-8f7b-10855d4424ee@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit df5fde297e617041449f603ed5f646861c80000b upstream.

A report from Oleg Smirnov indicates that the unusual_devs quirks
entry for the Novatek camera does not need to override the subclass
and protocol parameters:

[3266355.209532] usb 1-3: new high-speed USB device number 10 using xhci_hcd
[3266355.333031] usb 1-3: New USB device found, idVendor=0603, idProduct=8611, bcdDevice= 1.00
[3266355.333040] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[3266355.333043] usb 1-3: Product: YICARCAM
[3266355.333045] usb 1-3: Manufacturer: XIAO-YI
[3266355.333047] usb 1-3: SerialNumber: 966110000000100
[3266355.338621] usb-storage 1-3:1.0: USB Mass Storage device detected
[3266355.338817] usb-storage 1-3:1.0: Quirks match for vid 0603 pid 8611: 4000
[3266355.338821] usb-storage 1-3:1.0: This device (0603,8611,0100 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h (kernel 6.16.10-arch1-1)
                    Please send a copy of this message to
<linux-usb@vger.kernel.org> and <usb-storage@lists.one-eyed-alien.net>

The overrides are harmless but they do provoke the driver into logging
this annoying message.  Update the entry to remove the unneeded entries.

Reported-by: stealth <oleg.smirnov.1988@gmail.com>
Closes: https://lore.kernel.org/CAKxjRRxhC0s19iEWoN=pEMqXJ_z8w_moC0GCXSqSKCcOddnWjQ@mail.gmail.com/
Fixes: 6ca8af3c8fb5 ("USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera")
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/b440f177-f0b8-4d5a-8f7b-10855d4424ee@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: storage: Fix memory leak in USB bulk transport 2025-12-06T21:27:38+00:00 Desnes Nunes desnesn@redhat.com 2025-10-31T04:34:36+00:00 5b815ddb3f5560fac35b16de3a2a22d5f81c5993 commit 41e99fe2005182139b1058db71f0d241f8f0078c upstream. A kernel memory leak was identified by the 'ioctl_sg01' test from Linux Test Project (LTP). The following bytes were mainly observed: 0x53425355. When USB storage devices incorrectly skip the data phase with status data, the code extracts/validates the CSW from the sg buffer, but fails to clear it afterwards. This leaves status protocol data in srb's transfer buffer, such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can lead to USB protocols leaks to user space through SCSI generic (/dev/sg*) interfaces, such as the one seen here when the LTP test requested 512 KiB. Fix the leak by zeroing the CSW data in srb's transfer buffer immediately after the validation of devices that skip data phase. Note: Differently from CVE-2018-1000204, which fixed a big leak by zero- ing pages at allocation time, this leak occurs after allocation, when USB protocol data is written to already-allocated sg pages. Fixes: a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") Cc: stable <stable@kernel.org> Signed-off-by: Desnes Nunes <desnesn@redhat.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/20251031043436.55929-1-desnesn@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 41e99fe2005182139b1058db71f0d241f8f0078c upstream.

A kernel memory leak was identified by the 'ioctl_sg01' test from Linux
Test Project (LTP). The following bytes were mainly observed: 0x53425355.

When USB storage devices incorrectly skip the data phase with status data,
the code extracts/validates the CSW from the sg buffer, but fails to clear
it afterwards. This leaves status protocol data in srb's transfer buffer,
such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can
lead to USB protocols leaks to user space through SCSI generic (/dev/sg*)
interfaces, such as the one seen here when the LTP test requested 512 KiB.

Fix the leak by zeroing the CSW data in srb's transfer buffer immediately
after the validation of devices that skip data phase.

Note: Differently from CVE-2018-1000204, which fixed a big leak by zero-
ing pages at allocation time, this leak occurs after allocation, when USB
protocol data is written to already-allocated sg pages.

Fixes: a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()")
Cc: stable <stable@kernel.org>
Signed-off-by: Desnes Nunes <desnesn@redhat.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20251031043436.55929-1-desnesn@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: storage: Ignore driver CD mode for Realtek multi-mode Wi-Fi dongles 2025-08-17T10:13:36+00:00 Zenm Chen zenmchen@gmail.com 2025-08-13T16:24:15+00:00 a3dc32c635bae0ae569f489e00de0e8f015bfc25 Many Realtek USB Wi-Fi dongles released in recent years have two modes: one is driver CD mode which has Windows driver onboard, another one is Wi-Fi mode. Add the US_FL_IGNORE_DEVICE quirk for these multi-mode devices. Otherwise, usb_modeswitch may fail to switch them to Wi-Fi mode. Currently there are only two USB IDs known to be used by these multi-mode Wi-Fi dongles: 0bda:1a2b and 0bda:a192. Information about Mercury MW310UH in /sys/kernel/debug/usb/devices. T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=a192 Rev= 2.00 S: Manufacturer=Realtek S: Product=DISK C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Information about D-Link AX9U rev. A1 in /sys/kernel/debug/usb/devices. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 55 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=1a2b Rev= 0.00 S: Manufacturer=Realtek S: Product=DISK C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable <stable@kernel.org> Signed-off-by: Zenm Chen <zenmchen@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20250813162415.2630-1-zenmchen@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Many Realtek USB Wi-Fi dongles released in recent years have two modes:
one is driver CD mode which has Windows driver onboard, another one is
Wi-Fi mode. Add the US_FL_IGNORE_DEVICE quirk for these multi-mode devices.
Otherwise, usb_modeswitch may fail to switch them to Wi-Fi mode.

Currently there are only two USB IDs known to be used by these multi-mode
Wi-Fi dongles: 0bda:1a2b and 0bda:a192.

Information about Mercury MW310UH in /sys/kernel/debug/usb/devices.
T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 12 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=a192 Rev= 2.00
S:  Manufacturer=Realtek
S:  Product=DISK
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Information about D-Link AX9U rev. A1 in /sys/kernel/debug/usb/devices.
T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 55 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=1a2b Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=DISK
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable <stable@kernel.org>
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250813162415.2630-1-zenmchen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: storage: realtek_cr: Use correct byte order for bcs->Residue 2025-08-13T15:19:28+00:00 Thorsten Blum thorsten.blum@linux.dev 2025-08-13T14:52:49+00:00 98da66a70ad2396e5a508c4245367797ebc052ce Since 'bcs->Residue' has the data type '__le32', convert it to the correct byte order of the CPU using this driver when assigning it to the local variable 'residue'. Cc: stable <stable@kernel.org> Fixes: 50a6cb932d5c ("USB: usb_storage: add ums-realtek driver") Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://lore.kernel.org/r/20250813145247.184717-3-thorsten.blum@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Since 'bcs->Residue' has the data type '__le32', convert it to the
correct byte order of the CPU using this driver when assigning it to
the local variable 'residue'.

Cc: stable <stable@kernel.org>
Fixes: 50a6cb932d5c ("USB: usb_storage: add ums-realtek driver")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250813145247.184717-3-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera 2025-08-13T15:16:46+00:00 Mael GUERIN mael.guerin@murena.io 2025-08-06T16:44:03+00:00 6ca8af3c8fb584f3424a827f554ff74f898c27cd Add the US_FL_BULK_IGNORE_TAG quirk for Novatek NTK96550-based camera to fix USB resets after sending SCSI vendor commands due to CBW and CSW tags difference, leading to undesired slowness while communicating with the device. Please find below the copy of /sys/kernel/debug/usb/devices with my device plugged in (listed as TechSys USB mass storage here, the underlying chipset being the Novatek NTK96550-based camera): T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0603 ProdID=8611 Rev= 0.01 S: Manufacturer=TechSys S: Product=USB Mass Storage S: SerialNumber=966110000000100 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Mael GUERIN <mael.guerin@murena.io> Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20250806164406.43450-1-mael.guerin@murena.io Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add the US_FL_BULK_IGNORE_TAG quirk for Novatek NTK96550-based camera
to fix USB resets after sending SCSI vendor commands due to CBW and
CSW tags difference, leading to undesired slowness while communicating
with the device.

Please find below the copy of /sys/kernel/debug/usb/devices with my
device plugged in (listed as TechSys USB mass storage here, the
underlying chipset being the Novatek NTK96550-based camera):

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0603 ProdID=8611 Rev= 0.01
S:  Manufacturer=TechSys
S:  Product=USB Mass Storage
S:  SerialNumber=966110000000100
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Mael GUERIN <mael.guerin@murena.io>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250806164406.43450-1-mael.guerin@murena.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: storage: reltek_cr: convert to use secs_to_jiffies 2025-06-19T10:27:36+00:00 Yuesong Li liyuesong@vivo.com 2025-06-16T06:25:06+00:00 7bf742b071c7ad8cdaae74a79c6af63f6447dada Since commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") has been introduced, we can use it to avoid scaling the time to msec Signed-off-by: Yuesong Li <liyuesong@vivo.com> Link: https://lore.kernel.org/r/20250616062506.1074376-1-liyuesong@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Since commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") has
been introduced, we can use it to avoid scaling the time to msec

Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Link: https://lore.kernel.org/r/20250616062506.1074376-1-liyuesong@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
treewide, timers: Rename from_timer() to timer_container_of() 2025-06-08T07:07:37+00:00 Ingo Molnar mingo@kernel.org 2025-05-09T05:51:14+00:00 41cb08555c4164996d67c78b3bf1c658075b75f1 Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com 
Move this API to the canonical timer_*() namespace.

[ tglx: Redone against pre rc1 ]

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Merge tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2025-06-06T19:45:35+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-06-06T19:45:35+00:00 c0c9379f235df33a12ceae94370ad80c5278324d Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.16-rc1. Included in here are the following: - USB offload support for audio devices. I think this takes the record for the most number of patch series (30+) over the longest period of time (2+ years) to get merged properly. Many props go to Wesley Cheng for seeing this effort through, they took a major out-of-tree hacked-up-monstrosity that was created by multiple vendors for their specific devices, got it all merged into a semi-coherent set of changes, and got all of the different major subsystems to agree on how this should be implemented both with changes to their code as well as userspace apis, AND wrangled the hardware companies into agreeing to go forward with this, despite making them all redo work they had already done in their private device trees. This feature offers major power savings on embedded devices where a USB audio stream can continue to flow while the rest of the system is sleeping, something that devices running on battery power really care about. There are still some more small tweaks left to be done here, and those patches are still out for review and arguing among the different hardware companies, but this is a major step forward and a great example of how to do upstream development well. - small number of thunderbolt fixes and updates, things seem to be slowing down here (famous last words...) - xhci refactors and reworking to try to handle some rough corner cases in some hardware implementations where things don't always work properly - typec driver updates - USB3 power management reworking and updates - Removal of some old and orphaned UDC gadget drivers that had not been used in a very long time, dropping over 11 thousand lines from the tree, always a nice thing, making up for the 12k lines added for the USB offload feature. - lots of little updates and fixes in different drivers All of these have been in linux-next for over 2 weeks, the USB offload logic has been in there for 8 weeks now, with no reported issues" * tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) ALSA: usb-audio: qcom: fix USB_XHCI dependency ASoC: qdsp6: fix compile-testing without CONFIG_OF usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro USB: typec: fix const issue in typec_match() USB: gadget: udc: fix const issue in gadget_match_driver() USB: gadget: fix up const issue with struct usb_function_instance USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB USB: serial: bus: fix const issue in usb_serial_device_match() usb: usbtmc: Fix timeout value in get_stb usb: usbtmc: Fix read_stb function and get_stb ioctl ALSA: qc_audio_offload: try to reduce address space confusion ALSA: qc_audio_offload: avoid leaking xfer_buf allocation ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe() usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub usb: gadget: lpc32xx_udc: Use USB API functions rather than constants usb: gadget: epautoconf: Use USB API functions rather than constants ... 
Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
  Included in here are the following:

   - USB offload support for audio devices.

     I think this takes the record for the most number of patch series
     (30+) over the longest period of time (2+ years) to get merged
     properly.

     Many props go to Wesley Cheng for seeing this effort through, they
     took a major out-of-tree hacked-up-monstrosity that was created by
     multiple vendors for their specific devices, got it all merged into
     a semi-coherent set of changes, and got all of the different major
     subsystems to agree on how this should be implemented both with
     changes to their code as well as userspace apis, AND wrangled the
     hardware companies into agreeing to go forward with this, despite
     making them all redo work they had already done in their private
     device trees.

     This feature offers major power savings on embedded devices where a
     USB audio stream can continue to flow while the rest of the system
     is sleeping, something that devices running on battery power really
     care about. There are still some more small tweaks left to be done
     here, and those patches are still out for review and arguing among
     the different hardware companies, but this is a major step forward
     and a great example of how to do upstream development well.

   - small number of thunderbolt fixes and updates, things seem to be
     slowing down here (famous last words...)

   - xhci refactors and reworking to try to handle some rough corner
     cases in some hardware implementations where things don't always
     work properly

   - typec driver updates

   - USB3 power management reworking and updates

   - Removal of some old and orphaned UDC gadget drivers that had not
     been used in a very long time, dropping over 11 thousand lines from
     the tree, always a nice thing, making up for the 12k lines added
     for the USB offload feature.

   - lots of little updates and fixes in different drivers

  All of these have been in linux-next for over 2 weeks, the USB offload
  logic has been in there for 8 weeks now, with no reported issues"

* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  ALSA: usb-audio: qcom: fix USB_XHCI dependency
  ASoC: qdsp6: fix compile-testing without CONFIG_OF
  usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
  usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
  USB: typec: fix const issue in typec_match()
  USB: gadget: udc: fix const issue in gadget_match_driver()
  USB: gadget: fix up const issue with struct usb_function_instance
  USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
  USB: serial: bus: fix const issue in usb_serial_device_match()
  usb: usbtmc: Fix timeout value in get_stb
  usb: usbtmc: Fix read_stb function and get_stb ioctl
  ALSA: qc_audio_offload: try to reduce address space confusion
  ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
  ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
  ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
  usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
  dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
  usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
  usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
  usb: gadget: epautoconf: Use USB API functions rather than constants
  ...