linux-stable.git/drivers/usb/storage, branch linux-2.6.28.y

USB: usb-storage: augment unusual_devs entry for Simple Tech/Datafab

2009-05-02T17:56:58+00:00

upstream commit: e4813eec8d47c8299d968bd5349dc881fa481c26

This patch (as1227) adds the MAX_SECTORS_64 flag to the unusual_devs
entry for the Simple Tech/Datafab controller.  This fixes Bugzilla
#12882.

Signed-off-by: Alan Stern 
Reported-and-tested-by: binbin 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Chris Wright

USB: usb-storage: increase max_sectors for tape drives

2009-05-02T17:56:34+00:00

'
upstream commit: 5c16034d73da2c1b663aa25dedadbc533b3d811c

This patch (as1203) increases the max_sector limit for USB tape
drives.  By default usb-storage sets max_sectors to 240 (i.e., 120 KB)
for all devices.  But tape drives need a higher limit, since tapes can
and do have very large block sizes.  Without the ability to transfer
an entire large block in a single command, such tapes can't be used.

This fixes Bugzilla #12207.

Signed-off-by: Alan Stern 
Reported-and-tested-by: Phil Mitchell 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Chris Wright

USB: fix USB_STORAGE_CYPRESS_ATACB

2009-05-02T17:56:33+00:00

upstream commit: 1f4159c1620f74377e26d8a569d10ca5907ef475

commit 64a87b24: [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer
changed the scsi_eh_prep_cmnd logic by making it clear
the ->cmnd buffer. But the sat to cypress atacb translation supposed
the ->cmnd buffer wasn't modified.

This patch makes it set the ->cmnd buffer after scsi_eh_prep_cmnd call.
The problem and a fix was reported by Matthieu CASTET 

It also removes all the hackery fiddling of scsi_cmnd and scsi_eh_save by
requesting from scsi_eh_prep_cmnd to prepare a read into ->sense_buffer,
which is much more suitable a buffer for HW transfers, then after the command
execution the regs read is copied into regs buffer before actual preparation
of sense_buffer.

Also fix an alien comment character to my utf-8 editor.

Signed-off-by: Boaz Harrosh 
Signed-off-by: Matthieu CASTET 
Cc: stable 
Cc: James Bottomley 
Cc: Matthew Dharm 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Chris Wright

USB: unusual_devs: Add support for GI 0431 SD-Card interface

2009-03-23T21:55:28+00:00

commit c497e715f93d148d751c055401568684eea0bf6b upstream.

Enable the SD-Card interface on the GI 0431 HSUPA stick from Option.

The unusual_devs.h entry is necessary because the device descriptor is
vendor-specific. That prevents usb-storage from binding to it as an
interface driver.

T:  Bus=07 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 15 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=0af0 ProdID=7501 Rev= 0.00
S:  Manufacturer=Option N.V.
S:  Product=Globetrotter HSUPA Modem
C:* #Ifs=11 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#=10 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Jan Dumon 
Signed-off-by: Phil Dibowitz 
Signed-off-by: Greg Kroah-Hartman

USB: Updated unusual-devs entry for USB mass storage on Nokia 6233

2009-03-23T21:55:28+00:00

commit 716a9c8561d9c50ec454f4fbd39a265892feda2c upstream.

Current firmware revision 5.60 still behaves the same,
so update the quirk up a (non-existing) 99.99 revision.

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493415

Signed-off-by: Moritz Muehlenhoff 
Tested-by: Jan Heitkoetter 
Signed-off-by: Phil Dibowitz 
Signed-off-by: Greg Kroah-Hartman

USB: storage: Unusual USB device Prolific 2507 variation added

2009-03-23T21:55:27+00:00

commit 8a0845c51b2e300f5204a323b874f7f58ea0eff7 upstream.

The "c-enter" USB to Toshiba 1.8" IDE enclosure needs special treatment
to work flawlessly. This patch is absolutely trivial, as the integrated
USB-IDE bridge is already identified to be an "unusual" device, only the
bcdDevice is different (lower) to the bcdDeviceMin already included in
the kernel.
It is a Prolific 2507 bridge.

T:  Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=067b ProdID=2507 Rev= 0.01
S:  Manufacturer=Prolific Technology Inc.
S:  Product=ATAPI-6 Bridge Controller
S:  SerialNumber=00000272
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms


Signed-off-by: Thomas Bartosik 
Signed-off-by: Greg Kroah-Hartman

USB: usb-storage: add IGNORE_RESIDUE flag for Genesys Logic adapters

2009-03-17T00:32:03+00:00

commit 5126a2674ddac0804450f59da25a058cca629d38 upstream.

This patch (as1219) adds the IGNORE_RESIDUE flag to the unusual_devs
entries for Genesys Logic's USB-IDE adapter.  Although this device
usually gets the residue correct, there is one command crucial to the
operation of CD and DVD drives which it messes up.

Tested-by: Mike Lampard 
Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: usb-storage: add Pentax to the bad-vendor list

2009-02-12T17:50:38+00:00

commit 506e9469833c66ed6bb9acd902e208f7301b6adb upstream.

This patch (as1202) adds Pentax to usb-storage's list of bad vendors
whose devices always need the CAPACITY_HEURISTICS flag.  This is in
addition to the existing entries: Nokia, Nikon, and Motorola.

Signed-off-by: Alan Stern 
Tested-by: Virgo Pärna 
Signed-off-by: Greg Kroah-Hartman

USB: storage: add unusual devs entry

2009-02-02T17:53:21+00:00

commit b90de8aea36ae6fe8050a6e91b031369c4f251b2 upstream.

This adds an unusual devs entry for 2116:0320

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

usb-storage: set CAPACITY_HEURISTICS flag for bad vendors

2009-01-25T00:41:41+00:00

commit a81a81a25d3ecdab777abca87c5ddf484056103d upstream.

This patch (as1194b) makes usb-storage set the CAPACITY_HEURISTICS flag
for all devices made by Nokia, Nikon, or Motorola.  These companies
seem to include the READ CAPACITY bug in all of their devices.

Since cell phones and digital cameras rely on flash storage, which
always has an even number of sectors, setting CAPACITY_HEURISTICS
shouldn't cause any problems.  Not even if the companies wise up and
start making devices without the bug.

A large number of unusual_devs entries are now unnecessary, so the
patch removes them.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman