linux-stable.git/drivers/usb/serial, branch v5.8.2

USB: serial: cp210x: enable usb generic throttle/unthrottle

2020-08-19T06:27:00+00:00

commit 4387b3dbb079d482d3c2b43a703ceed4dd27ed28 upstream.

Assign the .throttle and .unthrottle functions to be generic function
in the driver structure to prevent data loss that can otherwise occur
if the host does not enable USB throttling.

Signed-off-by: Brant Merryman 
Co-developed-by: Phu Luu 
Signed-off-by: Phu Luu 
Link: https://lore.kernel.org/r/57401AF3-9961-461F-95E1-F8AFC2105F5E@silabs.com
[ johan: fix up tags ]
Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control")
Cc: stable      # 2.6.12
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: re-enable auto-RTS on open

2020-08-19T06:27:00+00:00

commit c7614ff9b73a1e6fb2b1b51396da132ed22fecdb upstream.

CP210x hardware disables auto-RTS but leaves auto-CTS when in hardware
flow control mode and UART on cp210x hardware is disabled. When
re-opening the port, if auto-CTS is enabled on the cp210x, then auto-RTS
must be re-enabled in the driver.

Signed-off-by: Brant Merryman 
Co-developed-by: Phu Luu 
Signed-off-by: Phu Luu 
Link: https://lore.kernel.org/r/ECCF8E73-91F3-4080-BE17-1714BC8818FB@silabs.com
[ johan: fix up tags and problem description ]
Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control")
Cc: stable      # 2.6.12
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: iuu_phoenix: fix led-activity helpers

2020-08-19T06:26:39+00:00

[ Upstream commit de37458f8c2bfc465500a1dd0d15dbe96d2a698c ]

The set-led command is eight bytes long and starts with a command byte
followed by six bytes of RGB data and ends with a byte encoding a
frequency (see iuu_led() and iuu_rgbf_fill_buffer()).

The led activity helpers had a few long-standing bugs which corrupted
the command packets by inserting a second command byte and thereby
offsetting the RGB data and dropping the frequency in non-xmas mode.

In xmas mode, a related off-by-one error left the frequency field
uninitialised.

Fixes: 60a8fc017103 ("USB: add iuu_phoenix driver")
Reported-by: George Spelvin 
Link: https://lore.kernel.org/r/20200716085056.31471-1-johan@kernel.org
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin

USB: serial: qcserial: add EM7305 QDL product ID

2020-08-11T13:48:06+00:00

commit d2a4309c1ab6df424b2239fe2920d6f26f808d17 upstream.

When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba
laptop, it changed product ID to 0x9062 when entering QDL mode:

usb 2-4: new high-speed USB device number 78 using xhci_hcd
usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: EM7305
usb 2-4: Manufacturer: Sierra Wireless, Incorporated

The upgrade could complete after running
 # echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id

qcserial 2-4:1.0: Qualcomm USB modem converter detected
usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0

Signed-off-by: Erik Ekman 
Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: iuu_phoenix: fix memory corruption

2020-07-16T08:20:21+00:00

The driver would happily overwrite its write buffer with user data in
256 byte increments due to a removed buffer-space sanity check.

Fixes: 5fcf62b0f1f2 ("tty: iuu_phoenix: fix locking.")
Cc: stable      # 2.6.31
Signed-off-by: Johan Hovold

USB: serial: option: add Quectel EG95 LTE modem

2020-07-07T15:40:52+00:00

Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0195 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Signed-off-by: AceLan Kao 
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold

USB: serial: ch341: add new Product ID for CH340

2020-06-23T08:57:27+00:00

Add PID for CH340 that's found on some ESP8266 dev boards made by
LilyGO. The specific device that contains such serial converter can be
seen here: https://github.com/LilyGO/LILYGO-T-OI.

Apparently, it's a regular CH340, but I've confirmed with others that
also bought this board that the PID found on this device (0x7522)
differs from other devices with the "same" converter (0x7523).
Simply adding its PID to the driver and rebuilding it made it work
as expected.

Signed-off-by: Igor Moura 
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold

USB: serial: option: add GosunCn GM500 series

2020-06-23T07:57:40+00:00

Add USB IDs for GosunCn GM500 series cellular modules.

RNDIS config:
usb-devices
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=305a ProdID=1404 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

MBIM config:
usb-devices
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=305a ProdID=1405 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim

ECM config:
usb-devices
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=305a ProdID=1406 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether

Signed-off-by: Jörgen Storvist 
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold

USB: serial: cypress_m8: enable Simply Automated UPB PIM

2020-06-23T07:56:17+00:00

This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module)
which allows for controlling multiple UPB compatible devices from Linux
using the standard serial interface.

Based on vendor application source code there are two different models
of USB based PIM devices in addition to a number of RS232 based PIM's.

The vendor UPB application source contains the following USB ID's:

	#define USB_PCS_VENDOR_ID 0x04b4
	#define USB_PCS_PIM_PRODUCT_ID 0x5500

	#define USB_SAI_VENDOR_ID 0x17dd
	#define USB_SAI_PIM_PRODUCT_ID 0x5500

The first set of ID's correspond to the PIM variant sold by Powerline
Control Systems while the second corresponds to the Simply Automated
Incorporated PIM. As the product ID for both of these match the default
cypress HID->COM RS232 product ID it assumed that they both use an
internal variant of this HID->COM RS232 converter hardware. However
as the vendor ID for the Simply Automated variant is different we need
to also add it to the cypress_M8 driver so that it is properly
detected.

Signed-off-by: James Hilliard 
Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com
Cc: stable@vger.kernel.org
[ johan: amend VID define entry ]
Signed-off-by: Johan Hovold

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada