linux-stable.git/drivers/usb/serial, branch v5.19.8 Linux kernel stable tree USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode 2022-09-08T09:24:05+00:00 Slark Xiao slark_xiao@163.com 2022-08-10T03:30:50+00:00 1f45b7e93c942b840490b5031b1370ef4366ecea commit 8ffe20d08f2c95d702c453020d03a4c568a988f0 upstream. We added PIDs for MV32-WA/WB MBIM mode before, now we need to add support for RmNet mode. Test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f3 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F3 USB Mobile Broadband S: SerialNumber=d7b4be8d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f4 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F4 USB Mobile Broadband S: SerialNumber=d095087d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> [ johan: sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8ffe20d08f2c95d702c453020d03a4c568a988f0 upstream.

We added PIDs for MV32-WA/WB MBIM mode before, now we need to add
support for RmNet mode.

Test evidence as below:
T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f3 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F3 USB Mobile Broadband
S:  SerialNumber=d7b4be8d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f4 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F4 USB Mobile Broadband
S:  SerialNumber=d095087d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Signed-off-by: Slark Xiao <slark_xiao@163.com>
[ johan: sort entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: option: add Quectel EM060K modem 2022-09-08T09:24:05+00:00 Yonglin Tan yonglin.tan@outlook.com 2022-07-19T11:28:00+00:00 cce30bc7ae4823eba2dfbe0c964f16d9c330c93c commit f766f3abe6dbc9bf8b56a5d53c87e5a17942c154 upstream. Add usb product id entry for the Quectel EM060K module. "MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030b Rev= 5.04 S: Manufacturer=Quectel S: Product=EM060K-GL S: SerialNumber=89fb57db C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com> [ johan: mention QDSS port and sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f766f3abe6dbc9bf8b56a5d53c87e5a17942c154 upstream.

Add usb product id entry for the Quectel EM060K module.

"MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030b Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=EM060K-GL
S:  SerialNumber=89fb57db
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
[ johan: mention QDSS port and sort entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: option: add support for OPPO R11 diag port 2022-09-08T09:24:05+00:00 Yan Xinyu sdlyyxy@bupt.edu.cn 2022-07-14T10:20:37+00:00 2a305d1b9055e15ead89a1332c0af7cef3daec4c commit 8d5fc280392735e4441b35de14f2f4860fa8d83c upstream. Add support for OPPO R11 USB diag serial port to option driver. This phone uses Qualcomm Snapdragon 660 SoC. usb-devices output: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22d9 ProdID=276c Rev=04.04 S: Manufacturer=OPPO S: Product=SDM660-MTP _SN:09C6BCA7 S: SerialNumber=beb2c403 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn> Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8d5fc280392735e4441b35de14f2f4860fa8d83c upstream.

Add support for OPPO R11 USB diag serial port to option driver. This
phone uses Qualcomm Snapdragon 660 SoC.

usb-devices output:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22d9 ProdID=276c Rev=04.04
S:  Manufacturer=OPPO
S:  Product=SDM660-MTP _SN:09C6BCA7
S:  SerialNumber=beb2c403
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs

Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn>
Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn
Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: cp210x: add Decagon UCA device id 2022-09-08T09:24:05+00:00 Johan Hovold johan@kernel.org 2022-08-29T14:25:50+00:00 bda33a5038a9045bbd88504cbe36bf2bf9003a9e commit ceb4038472a4803e7046ed488b03d11551991514 upstream. Add the device id for Decagon Devices USB Cable Adapter. Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108 Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ceb4038472a4803e7046ed488b03d11551991514 upstream.

Add the device id for Decagon Devices USB Cable Adapter.

Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: ch341: fix disabled rx timer on older devices 2022-09-08T09:24:05+00:00 Johan Hovold johan@kernel.org 2022-08-31T08:15:25+00:00 40bc52e14011b3b1d01fed5f527e59e1ce7a4bdd commit 41ca302a697b64a3dab4676e01d0d11bb184737d upstream. At least one older CH341 appears to have the RX timer enable bit inverted so that setting it disables the RX timer and prevents the FIFO from emptying until it is full. Only set the RX timer enable bit for devices with version newer than 0x27 (even though this probably affects all pre-0x30 devices). Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 41ca302a697b64a3dab4676e01d0d11bb184737d upstream.

At least one older CH341 appears to have the RX timer enable bit
inverted so that setting it disables the RX timer and prevents the FIFO
from emptying until it is full.

Only set the RX timer enable bit for devices with version newer than
0x27 (even though this probably affects all pre-0x30 devices).

Reported-by: Jonathan Woithe <jwoithe@just42.net>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au
Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Cc: stable@vger.kernel.org      # 4.10
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: ch341: fix lost character on LCR updates 2022-09-08T09:24:04+00:00 Johan Hovold johan@kernel.org 2022-08-31T08:15:24+00:00 cffe34a4d070b3e016c37284b5960dedd5661857 commit 8e83622ae7ca481c76c8fd9579877f6abae64ca2 upstream. Disable LCR updates for pre-0x30 devices which use a different (unknown) protocol for line control and where the current register write causes the next received character to be lost. Note that updating LCR using the INIT command has no effect on these devices either. Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8e83622ae7ca481c76c8fd9579877f6abae64ca2 upstream.

Disable LCR updates for pre-0x30 devices which use a different (unknown)
protocol for line control and where the current register write causes
the next received character to be lost.

Note that updating LCR using the INIT command has no effect on these
devices either.

Reported-by: Jonathan Woithe <jwoithe@just42.net>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au
Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling")
Cc: stable@vger.kernel.org      # 4.10
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id 2022-09-08T09:24:02+00:00 Niek Nooijens niek.nooijens@omron.com 2022-08-01T08:39:25+00:00 23475d8ebcca8c1435c3da99649b7c5ca613c549 commit 001047ea241a9646010b2744451dfbc7289542f3 upstream. works perfectly with: modprobe ftdi_sio echo "0590 00b2" | tee /sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null but doing this every reboot is a pain in the ass. Signed-off-by: Niek Nooijens <niek.nooijens@omron.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 001047ea241a9646010b2744451dfbc7289542f3 upstream.

works perfectly with:
modprobe ftdi_sio
echo "0590 00b2" | tee
/sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null

but doing this every reboot is a pain in the ass.

Signed-off-by: Niek Nooijens <niek.nooijens@omron.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: fix tty-port initialized comments 2022-08-17T13:15:38+00:00 Johan Hovold johan@kernel.org 2022-07-25T08:44:57+00:00 d293cf992a10a77d915a83d0784ba037a9b341cd [ Upstream commit 688ee1d1785c1359f9040f615dd8e6054962bce2 ] Fix up the tty-port initialized comments which got truncated and obfuscated when replacing the old ASYNCB_INITIALIZED flag. Fixes: d41861ca19c9 ("tty: Replace ASYNC_INITIALIZED bit and update atomically") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 688ee1d1785c1359f9040f615dd8e6054962bce2 ]

Fix up the tty-port initialized comments which got truncated and
obfuscated when replacing the old ASYNCB_INITIALIZED flag.

Fixes: d41861ca19c9 ("tty: Replace ASYNC_INITIALIZED bit and update atomically")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
USB: serial: ftdi_sio: add Belimo device ids 2022-07-13T06:20:32+00:00 Lucien Buchmann lucien.buchmann@gmx.net 2022-06-25T00:17:44+00:00 7c239a071d1f04b7137789810807b4108d475c72 Those two product ids are known. Signed-off-by: Lucien Buchmann <lucien.buchmann@gmx.net> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
Those two product ids are known.

Signed-off-by: Lucien Buchmann <lucien.buchmann@gmx.net>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
USB: serial: option: add Quectel RM500K module support 2022-06-23T11:58:05+00:00 Macpaul Lin macpaul.lin@mediatek.com 2022-06-23T08:56:44+00:00 15b694e96c31807d8515aacfa687a1e8a4fbbadc Add usb product id of the Quectel RM500K module. RM500K provides 2 mandatory interfaces to Linux host after enumeration. - /dev/ttyUSB5: this is a serial interface for control path. User needs to write AT commands to this device node to query status, set APN, set PIN code, and enable/disable the data connection to 5G network. - ethX: this is the data path provided as a RNDIS devices. After the data connection has been established, Linux host can access 5G data network via this interface. "RNDIS": RNDIS + ADB + AT (/dev/ttyUSB5) + MODEM COMs usb-devices output for 0x7001: T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=7001 Rev=00.01 S: Manufacturer=MediaTek Inc. S: Product=USB DATA CARD S: SerialNumber=869206050009672 C: #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Co-developed-by: Ballon Shi <ballon.shi@quectel.com> Signed-off-by: Ballon Shi <ballon.shi@quectel.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
Add usb product id of the Quectel RM500K module.

RM500K provides 2 mandatory interfaces to Linux host after enumeration.
 - /dev/ttyUSB5: this is a serial interface for control path. User needs
   to write AT commands to this device node to query status, set APN,
   set PIN code, and enable/disable the data connection to 5G network.
 - ethX: this is the data path provided as a RNDIS devices. After the
   data connection has been established, Linux host can access 5G data
   network via this interface.

"RNDIS": RNDIS + ADB + AT (/dev/ttyUSB5) + MODEM COMs

usb-devices output for 0x7001:
T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=7001 Rev=00.01
S:  Manufacturer=MediaTek Inc.
S:  Product=USB DATA CARD
S:  SerialNumber=869206050009672
C:  #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Co-developed-by: Ballon Shi <ballon.shi@quectel.com>
Signed-off-by: Ballon Shi <ballon.shi@quectel.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>