linux-stable.git/drivers/usb/serial, branch v5.15 Linux kernel stable tree USB: serial: qcserial: add EM9191 QDL support 2021-10-07T13:39:06+00:00 Aleksander Morgado aleksander@aleksander.es 2021-10-07T12:25:01+00:00 11c52d250b34a0862edc29db03fbec23b30db6da When the module boots into QDL download mode it exposes the 1199:90d2 ids, which can be mapped to the qcserial driver, and used to run firmware upgrades (e.g. with the qmi-firmware-update program). T: Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90d2 Rev=00.00 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=8W0382004102A109 C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
When the module boots into QDL download mode it exposes the 1199:90d2
ids, which can be mapped to the qcserial driver, and used to run
firmware upgrades (e.g. with the qmi-firmware-update program).

  T:  Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
  D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  P:  Vendor=1199 ProdID=90d2 Rev=00.00
  S:  Manufacturer=Sierra Wireless, Incorporated
  S:  Product=Sierra Wireless EM9191
  S:  SerialNumber=8W0382004102A109
  C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA
  I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
USB: serial: option: add Quectel EC200S-CN module support 2021-10-07T07:55:13+00:00 Yu-Tung Chang mtwget@gmail.com 2021-09-30T02:11:12+00:00 2263eb7370060bdb0013bc14e1a7c9bf33617a55 Add usb product id of the Quectel EC200S-CN module. usb-devices output for 0x6002: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6002 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=0000 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Signed-off-by: Yu-Tung Chang <mtwget@gmail.com> Link: https://lore.kernel.org/r/20210930021112.330396-1-mtwget@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
Add usb product id of the Quectel EC200S-CN module.

usb-devices output for 0x6002:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=6002 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=0000
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)

Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
Link: https://lore.kernel.org/r/20210930021112.330396-1-mtwget@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
USB: serial: option: add prod. id for Quectel EG91 2021-10-07T07:53:17+00:00 Tomaz Solc tomaz.solc@tablix.org 2021-10-06T12:57:50+00:00 c184accc4a42c7872dc8e8d0fc97a740dc61fe24 Adding support for Quectel EG91 LTE module. The interface layout is same as for EG95. usb-devices output: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0191 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan Interfaces: 0: Diag 1: GNSS 2: AT-command interface/modem 3: Modem 4: QMI Signed-off-by: Tomaz Solc <tomaz.solc@tablix.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
Adding support for Quectel EG91 LTE module.

The interface layout is same as for EG95.

usb-devices output:
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0191 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan

Interfaces:

0: Diag
1: GNSS
2: AT-command interface/modem
3: Modem
4: QMI

Signed-off-by: Tomaz Solc <tomaz.solc@tablix.org>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
USB: serial: option: add Telit LE910Cx composition 0x1204 2021-10-07T07:48:05+00:00 Daniele Palmas dnlplm@gmail.com 2021-10-04T10:56:55+00:00 f5a8a07edafed8bede17a95ef8940fe3a57a77d5 Add the following Telit LE910Cx composition: 0x1204: tty, adb, mbim, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20211004105655.8515-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
Add the following Telit LE910Cx composition:

0x1204: tty, adb, mbim, tty, tty, tty, tty

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211004105655.8515-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
USB: serial: option: add device id for Foxconn T99W265 2021-09-24T07:32:11+00:00 Slark Xiao slark_xiao@163.com 2021-09-17T11:01:06+00:00 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a Adding support for Foxconn device T99W265 for enumeration with PID 0xe0db. usb-devices output for 0xe0db T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0489 ProdID=e0db Rev=05.04 S: Manufacturer=Microsoft S: Product=Generic Mobile Broadband Adapter S: SerialNumber=6c50f452 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com [ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
Adding support for Foxconn device T99W265 for enumeration with
PID 0xe0db.

usb-devices output for 0xe0db
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0489 ProdID=e0db Rev=05.04
S:  Manufacturer=Microsoft
S:  Product=Generic Mobile Broadband Adapter
S:  SerialNumber=6c50f452
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com
[ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter 2021-09-24T07:31:10+00:00 Uwe Brandt uwe.brandt@gmail.com 2021-09-21T17:54:46+00:00 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter. Signed-off-by: Uwe Brandt <uwe.brandt@gmail.com> Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter.

Signed-off-by: Uwe Brandt <uwe.brandt@gmail.com>
Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
USB: serial: cp210x: add part-number debug printk 2021-09-23T08:46:31+00:00 Johan Hovold johan@kernel.org 2021-09-22T11:31:00+00:00 90ca6e7db83a06e9173bee5bb34ded3b37f4948d Add a part-number debug printk to facilitate debugging. Signed-off-by: Johan Hovold <johan@kernel.org> 
Add a part-number debug printk to facilitate debugging.

Signed-off-by: Johan Hovold <johan@kernel.org>
USB: serial: cp210x: fix dropped characters with CP2102 2021-09-23T08:44:46+00:00 Johan Hovold johan@kernel.org 2021-09-22T11:30:59+00:00 c32dfec6c1c36bbbcd5d33e949d99aeb215877ec Some CP2102 do not support event-insertion mode but return no error when attempting to enable it. This means that any event escape characters in the input stream will not be escaped by the device and consequently regular data may be interpreted as escape sequences and be removed from the stream by the driver. The reporter's device has batch number DCL00X etched into it and as discovered by the SHA2017 Badge team, counterfeit devices with that marking can be detected by sending malformed vendor requests. [1][2] Tests confirm that the possibly counterfeit CP2102 returns a single byte in response to a malformed two-byte part-number request, while an original CP2102 returns two bytes. Assume that every CP2102 that behaves this way also does not support event-insertion mode (e.g. cannot report parity errors). [1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418 [2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376 Reported-by: Malte Di Donato <malte@neo-soft.org> Tested-by: Malte Di Donato <malte@neo-soft.org> Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events") Cc: stable@vger.kernel.org # 5.9 Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
Some CP2102 do not support event-insertion mode but return no error when
attempting to enable it.

This means that any event escape characters in the input stream will not
be escaped by the device and consequently regular data may be
interpreted as escape sequences and be removed from the stream by the
driver.

The reporter's device has batch number DCL00X etched into it and as
discovered by the SHA2017 Badge team, counterfeit devices with that
marking can be detected by sending malformed vendor requests. [1][2]

Tests confirm that the possibly counterfeit CP2102 returns a single byte
in response to a malformed two-byte part-number request, while an
original CP2102 returns two bytes. Assume that every CP2102 that behaves
this way also does not support event-insertion mode (e.g. cannot report
parity errors).

[1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418
[2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376

Reported-by: Malte Di Donato <malte@neo-soft.org>
Tested-by: Malte Di Donato <malte@neo-soft.org>
Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events")
Cc: stable@vger.kernel.org	# 5.9
Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
USB: serial: option: remove duplicate USB device ID 2021-09-20T09:20:07+00:00 Krzysztof Kozlowski krzysztof.kozlowski@canonical.com 2021-09-17T09:18:48+00:00 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 The device ZTE 0x0094 is already on the list. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
The device ZTE 0x0094 is already on the list.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
USB: serial: mos7840: remove duplicated 0xac24 device ID 2021-09-20T09:19:55+00:00 Krzysztof Kozlowski krzysztof.kozlowski@canonical.com 2021-09-17T09:18:47+00:00 211f323768a25b30c106fd38f15a0f62c7c2b5f4 0xac24 device ID is already defined and used via BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list. Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> 
0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4.  Remove the duplicate from the list.

Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>