linux-stable.git/drivers/usb/serial, branch v5.0.2

USB: serial: cp210x: fix GPIO in autosuspend

2019-03-10T06:09:01+00:00

commit 7b0b644b9aa2de5032db0f468fddca091d0b7b90 upstream.

Current GPIO code in cp210x fails to take USB autosuspend into account,
making it practically impossible to use GPIOs with autosuspend enabled
without user configuration. Fix this like for ftdi_sio in a previous patch.
Tested on a CP2102N.

Signed-off-by: Karoly Pados 
Fixes: cf5276ce7867 ("USB: serial: cp210x: Adding GPIO support for CP2105")
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485

2019-03-10T06:08:58+00:00

commit 8d7fa3d4ea3f0ca69554215e87411494e6346fdc upstream.

This adds the USB ID of the Hjelmslund Electronics USB485 Iso stick.

Signed-off-by: Mans Rullgard 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: add ID for Ingenico 3070

2019-03-10T06:08:57+00:00

commit dd9d3d86b08d6a106830364879c42c78db85389c upstream.

Here is how this device appears in kernel log:

	usb 3-1: new full-speed USB device number 18 using xhci_hcd
	usb 3-1: New USB device found, idVendor=0b00, idProduct=3070
	usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
	usb 3-1: Product: Ingenico 3070
	usb 3-1: Manufacturer: Silicon Labs
	usb 3-1: SerialNumber: 0001

Apparently this is a POS terminal with embedded USB-to-Serial converter.

Cc: stable@vger.kernel.org
Signed-off-by: Ivan Mironov 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Telit ME910 ECM composition

2019-03-10T06:08:57+00:00

commit 6431866b6707d27151be381252d6eef13025cfce upstream.

This patch adds Telit ME910 family ECM composition 0x1102.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: keyspan_usa: add proper SPDX lines for .h files

2019-01-18T10:09:32+00:00

The keyspan_usa??msg.h files are under a BSD-3 style license, so
properly label them as such with a SPDX line at the top of the file.

Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold

USB: serial: pl2303: add new PID to support PL2303TB

2019-01-17T16:24:39+00:00

Add new PID to support PL2303TB (TYPE_HX)

Signed-off-by: Charles Yeh 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: ftdi_sio: fix GPIO not working in autosuspend

2019-01-14T13:40:11+00:00

There is a bug in the current GPIO code for ftdi_sio: it failed to take USB
autosuspend into account. If the device is in autosuspend, calls to
usb_control_msg() fail with -EHOSTUNREACH. Because the standard value for
autosuspend timeout is usually 2-5 seconds, this made it almost impossible
to use the GPIOs on machines that have USB autosuspend enabled. This patch
fixes the issue by acquiring a PM lock on the device for the duration of
the USB transfers. Tested on an FT231X device.

Signed-off-by: Karoly Pados 
[ johan: simplify code somewhat ]
Fixes: ba93cc7da896 ("USB: serial: ftdi_sio: implement GPIO support for FT-X devices")
Cc: stable 	# 4.20
Signed-off-by: Johan Hovold

USB: serial: simple: add Motorola Tetra TPG2200 device id

2019-01-07T15:37:52+00:00

Add new Motorola Tetra device id for Motorola Solutions TETRA PEI device

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0cad ProdID=9016 Rev=24.16
S:  Manufacturer=Motorola Solutions, Inc.
S:  Product=TETRA PEI interface
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple

Signed-off-by: Max Schulze 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: option: add Fibocom NL678 series

2018-12-21T15:47:02+00:00

Added USB serial option driver support for Fibocom NL678 series cellular
module: VID 2cb7 and PIDs 0x0104 and 0x0105.
Reserved network and ADB interfaces.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0104 Rev=03.10
S:  Manufacturer=Fibocom
S:  Product=Fibocom NL678-E Modem
S:  SerialNumber=12345678
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0105 Rev=03.10
S:  Manufacturer=Fibocom
S:  Product=Fibocom NL678-E Modem
S:  SerialNumber=12345678
C:  #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

Signed-off-by: Jörgen Storvist 
Cc: stable 
Acked-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

Merge USB 4.20-rc8 mergepoint into usb-next

2018-12-21T15:46:08+00:00

We need the USB changes in here for additional patches to be able to
apply cleanly.

Signed-off-by: Greg Kroah-Hartman