linux-stable.git/drivers/usb/serial, branch v4.9.280 Linux kernel stable tree USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2 2021-08-15T11:01:02+00:00 David Bauer mail@david-bauer.net 2021-08-04T23:25:22+00:00 384ea57acd45c8aeba0b964dcf272e066b50d615 commit 8da0e55c7988ef9f08a708c38e5c75ecd8862cf8 upstream. The Auto-M3 OP-COM v2 is a OBD diagnostic device using a FTD232 for the USB connection. Signed-off-by: David Bauer <mail@david-bauer.net> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8da0e55c7988ef9f08a708c38e5c75ecd8862cf8 upstream.

The Auto-M3 OP-COM v2 is a OBD diagnostic device using a FTD232 for the
USB connection.

Signed-off-by: David Bauer <mail@david-bauer.net>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: ch341: fix character loss at high transfer rates 2021-08-15T11:01:02+00:00 Willy Tarreau w@1wt.eu 2021-07-24T15:27:39+00:00 fa74dfe83ae8c5492c05b7f26f06a228f9e98cd5 commit 3c18e9baee0ef97510dcda78c82285f52626764b upstream. The chip supports high transfer rates, but with the small default buffers (64 bytes read), some entire blocks are regularly lost. This typically happens at 1.5 Mbps (which is the default speed on Rockchip devices) when used as a console to access U-Boot where the output of the "help" command misses many lines and where "printenv" mangles the environment. The FTDI driver doesn't suffer at all from this. One difference is that it uses 512 bytes rx buffers and 256 bytes tx buffers. Adopting these values completely resolved the issue, even the output of "dmesg" is reliable. I preferred to leave the Tx value unchanged as it is not involved in this issue, while a change could increase the risk of triggering the same issue with other devices having too small buffers. I verified that it backports well (and works) at least to 5.4. It's of low importance enough to be dropped where it doesn't trivially apply anymore. Cc: stable@vger.kernel.org Signed-off-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210724152739.18726-1-w@1wt.eu Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3c18e9baee0ef97510dcda78c82285f52626764b upstream.

The chip supports high transfer rates, but with the small default buffers
(64 bytes read), some entire blocks are regularly lost. This typically
happens at 1.5 Mbps (which is the default speed on Rockchip devices) when
used as a console to access U-Boot where the output of the "help" command
misses many lines and where "printenv" mangles the environment.

The FTDI driver doesn't suffer at all from this. One difference is that
it uses 512 bytes rx buffers and 256 bytes tx buffers. Adopting these
values completely resolved the issue, even the output of "dmesg" is
reliable. I preferred to leave the Tx value unchanged as it is not
involved in this issue, while a change could increase the risk of
triggering the same issue with other devices having too small buffers.

I verified that it backports well (and works) at least to 5.4. It's of
low importance enough to be dropped where it doesn't trivially apply
anymore.

Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210724152739.18726-1-w@1wt.eu
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: option: add Telit FD980 composition 0x1056 2021-08-15T11:01:02+00:00 Daniele Palmas dnlplm@gmail.com 2021-08-03T19:47:11+00:00 f4d6c9b3bea9e59566fd32aad524aba311807532 commit 5648c073c33d33a0a19d0cb1194a4eb88efe2b71 upstream. Add the following Telit FD980 composition 0x1056: Cfg #1: mass storage Cfg #2: rndis, tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20210803194711.3036-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5648c073c33d33a0a19d0cb1194a4eb88efe2b71 upstream.

Add the following Telit FD980 composition 0x1056:

Cfg #1: mass storage
Cfg #2: rndis, tty, adb, tty, tty, tty, tty

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20210803194711.3036-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick 2021-07-28T07:14:28+00:00 John Keeping john@metanate.com 2021-07-21T16:17:45+00:00 040b0ec6e1a0fa11df8f771f7036988435011f0c commit d6a206e60124a9759dd7f6dfb86b0e1d3b1df82e upstream. Add the USB serial device ID for the CEL ZigBee EM3588 radio stick. Signed-off-by: John Keeping <john@metanate.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d6a206e60124a9759dd7f6dfb86b0e1d3b1df82e upstream.

Add the USB serial device ID for the CEL ZigBee EM3588 radio stick.

Signed-off-by: John Keeping <john@metanate.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: cp210x: fix comments for GE CS1000 2021-07-28T07:14:28+00:00 Ian Ray ian.ray@ge.com 2021-07-19T16:43:49+00:00 4002226a9991e5ab5b63a8295ef828311947b3a4 commit e9db418d4b828dd049caaf5ed65dc86f93bb1a0c upstream. Fix comments for GE CS1000 CP210x USB ID assignments. Fixes: 42213a0190b5 ("USB: serial: cp210x: add some more GE USB IDs") Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e9db418d4b828dd049caaf5ed65dc86f93bb1a0c upstream.

Fix comments for GE CS1000 CP210x USB ID assignments.

Fixes: 42213a0190b5 ("USB: serial: cp210x: add some more GE USB IDs")
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: option: add support for u-blox LARA-R6 family 2021-07-28T07:14:28+00:00 Marco De Marco marco.demarco@posteo.net 2021-07-05T19:44:21+00:00 302b8152382b2889276a65f0b70856a962d9b5fe commit 94b619a07655805a1622484967754f5848640456 upstream. The patch is meant to support LARA-R6 Cat 1 module family. Module USB ID: Vendor ID: 0x05c6 Product ID: 0x90fA Interface layout: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: QMI wwan (not available in all versions) Signed-off-by: Marco De Marco <marco.demarco@posteo.net> Link: https://lore.kernel.org/r/49260184.kfMIbaSn9k@mars Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 94b619a07655805a1622484967754f5848640456 upstream.

The patch is meant to support LARA-R6 Cat 1 module family.

Module USB ID:
Vendor  ID: 0x05c6
Product ID: 0x90fA

Interface layout:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: QMI wwan (not available in all versions)

Signed-off-by: Marco De Marco <marco.demarco@posteo.net>
Link: https://lore.kernel.org/r/49260184.kfMIbaSn9k@mars
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: quatech2: fix control-request directions 2021-06-16T09:36:35+00:00 Johan Hovold johan@kernel.org 2021-05-24T09:17:05+00:00 0309bae47376787e1b78d485dc7ad4aea98d3aa7 commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the three requests which erroneously used usb_rcvctrlpipe(). Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable@vger.kernel.org # 3.5 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream.

The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Fix the three requests which erroneously used usb_rcvctrlpipe().

Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: stable@vger.kernel.org      # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: omninet: add device id for Zyxel Omni 56K Plus 2021-06-16T09:36:35+00:00 Alexandre GRIVEAUX agriveaux@deutnet.info 2021-05-23T16:35:21+00:00 07aebfc501f4e49da812ab02adcc2327f67042ee commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream. Add device id for Zyxel Omni 56K Plus modem, this modem include: USB chip: NetChip NET2888 Main chip: 901041A F721501APGF Another modem using the same chips is the Zyxel Omni 56K DUO/NEO, could be added with the right USB ID. Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream.

Add device id for Zyxel Omni 56K Plus modem, this modem include:

USB chip:
NetChip
NET2888

Main chip:
901041A
F721501APGF

Another modem using the same chips is the Zyxel Omni 56K DUO/NEO,
could be added with the right USB ID.

Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: ftdi_sio: add NovaTech OrionMX product ID 2021-06-16T09:36:35+00:00 George McCollister george.mccollister@gmail.com 2021-06-04T00:32:08+00:00 e10729496b8db1ff57052a4d5d48d10b5f3cefa5 commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream. Add PID for the NovaTech OrionMX so it can be automatically detected. Signed-off-by: George McCollister <george.mccollister@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream.

Add PID for the NovaTech OrionMX so it can be automatically detected.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: pl2303: add device id for ADLINK ND-6530 GC 2021-06-03T06:23:29+00:00 Zolton Jheng s6668c2t@gmail.com 2021-05-10T02:32:00+00:00 13d26ab903b8c05e75c22668391501ab2e8c08cf commit f8e8c1b2f782e7391e8a1c25648ce756e2a7d481 upstream. This adds the device id for the ADLINK ND-6530 which is a PL2303GC based device. Signed-off-by: Zolton Jheng <s6668c2t@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f8e8c1b2f782e7391e8a1c25648ce756e2a7d481 upstream.

This adds the device id for the ADLINK ND-6530 which is a PL2303GC based
device.

Signed-off-by: Zolton Jheng <s6668c2t@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>