linux-stable.git/drivers/usb/serial, branch v4.8.2

USB: serial: cp210x: Add ID for a Juniper console

2016-10-07T13:03:20+00:00

commit decc5360f23e9efe0252094f47f57f254dcbb3a9 upstream.

Signed-off-by: Kyle Jones 
Signed-off-by: Greg Kroah-Hartman

USB: serial: simple: add support for another Infineon flashloader

2016-09-12T08:19:41+00:00

This patch adds support for Infineon flashloader 0x8087/0x0801.

The flashloader is used in Telit LE940B modem family with Telit
flashing application.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: option: add WeTelecom 0x6802 and 0x6803 products

2016-08-24T12:13:40+00:00

These product IDs are listed in Windows driver.
0x6803 corresponds to WeTelecom WM-D300.
0x6802 name is unknown.

Signed-off-by: Aleksandr Makarov 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: option: add WeTelecom WM-D200

2016-08-20T13:32:14+00:00

Add support for WeTelecom WM-D200.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22de ProdID=6801 Rev=00.00
S:  Manufacturer=WeTelecom Incorporated
S:  Product=WeTelecom Mobile Products
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Signed-off-by: Aleksandr Makarov 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: mos7840: fix non-atomic allocation in write path

2016-08-15T08:43:57+00:00

There is an allocation with GFP_KERNEL flag in mos7840_write(),
while it may be called from interrupt context.

Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic
allocation in write path")

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: mos7720: fix non-atomic allocation in write path

2016-08-15T08:37:04+00:00

There is an allocation with GFP_KERNEL flag in mos7720_write(),
while it may be called from interrupt context.

Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic
allocation in write path")

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: fix memleak in driver-registration error path

2016-08-08T11:41:17+00:00

udriver struct allocated by kzalloc() will not be freed
if usb_register() and next calls fail. This patch fixes this
by adding one more step with kfree(udriver) in error path.

Signed-off-by: Alexey Klimov 
Acked-by: Alan Stern 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: option: add support for Telit LE920A4

2016-08-08T10:36:27+00:00

This patch adds a set of compositions for Telit LE920A4.

Compositions in short are:

0x1207: tty + tty
0x1208: tty + adb + tty + tty
0x1211: tty + adb + ecm
0x1212: tty + adb
0x1213: ecm + tty
0x1214: tty + adb + ecm + tty

telit_le922_blacklist_usbcfg3 is reused for compositions 0x1211
and 0x1214 due to the same interfaces positions.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: ftdi_sio: add device ID for WICED USB UART dev board

2016-08-08T10:24:14+00:00

BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0
UART/FIFO IC.

To support BCM920706V2_EVAL dev board for WICED development on Linux.
Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading
ftdi_sio for this board.

Signed-off-by: Sheng-Hui J. Chu 
Cc: stable 
Signed-off-by: Johan Hovold

USB: serial: ftdi_sio: add PIDs for Ivium Technologies devices

2016-08-08T10:00:02+00:00

Ivium Technologies uses the FTDI VID with custom PIDs for their line of
electrochemical interfaces and the PalmSens they developed for PalmSens
BV.

Signed-off-by: Robert Delien 
Cc: stable 
Signed-off-by: Johan Hovold