linux-stable.git/drivers/usb/serial, branch v4.1.36

USB: serial: cp210x: fix tiocmget error handling

2016-11-26T03:57:02+00:00

[ Upstream commit de24e0a108bc48062e1c7acaa97014bce32a919f ]

The current tiocmget implementation would fail to report errors up the
stack and instead leaked a few bits from the stack as a mask of
modem-status flags.

Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control")
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin

USB: serial: fix potential NULL-dereference at probe

2016-11-24T01:59:49+00:00

[ Upstream commit 126d26f66d9890a69158812a6caa248c05359daa ]

Make sure we have at least one port before attempting to register a
console.

Currently, at least one driver binds to a "dummy" interface and requests
zero ports for it. Should such an interface also lack endpoints, we get
a NULL-deref during probe.

Fixes: e5b1e2062e05 ("USB: serial: make minor allocation dynamic")
Cc: stable 	# 3.11
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin

USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7

2016-11-01T19:18:01+00:00

[ Upstream commit ca006f785fbfd7a5c901900bd3fe2b26e946a1ee ]

This adds support to ftdi_sio for the Infineon TriBoard TC2X7
engineering board for first-generation Aurix SoCs with Tricore CPUs.
Mere addition of the device IDs does the job.

Signed-off-by: Stefan Tauner 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin

USB: serial: simple: add support for another Infineon flashloader

2016-10-03T00:44:49+00:00

[ Upstream commit f190fd92458da3e869b4e2c6289e2c617490ae53 ]

This patch adds support for Infineon flashloader 0x8087/0x0801.

The flashloader is used in Telit LE940B modem family with Telit
flashing application.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin

USB: serial: option: add WeTelecom 0x6802 and 0x6803 products

2016-09-12T16:53:03+00:00

[ Upstream commit 40d9c32525cba79130612650b1abc47c0c0f19a8 ]

These product IDs are listed in Windows driver.
0x6803 corresponds to WeTelecom WM-D300.
0x6802 name is unknown.

Signed-off-by: Aleksandr Makarov 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin

USB: serial: option: add WeTelecom WM-D200

2016-09-12T13:44:35+00:00

[ Upstream commit 6695593e4a7659db49ac6eca98c164f7b5589f72 ]

Add support for WeTelecom WM-D200.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22de ProdID=6801 Rev=00.00
S:  Manufacturer=WeTelecom Incorporated
S:  Product=WeTelecom Mobile Products
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Signed-off-by: Aleksandr Makarov 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin

USB: serial: mos7840: fix non-atomic allocation in write path

2016-09-12T13:30:59+00:00

[ Upstream commit 3b7c7e52efda0d4640060de747768360ba70a7c0 ]

There is an allocation with GFP_KERNEL flag in mos7840_write(),
while it may be called from interrupt context.

Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic
allocation in write path")

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin

USB: serial: mos7720: fix non-atomic allocation in write path

2016-09-12T13:30:54+00:00

[ Upstream commit 5a5a1d614287a647b36dff3f40c2b0ceabbc83ec ]

There is an allocation with GFP_KERNEL flag in mos7720_write(),
while it may be called from interrupt context.

Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic
allocation in write path")

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin

USB: serial: fix memleak in driver-registration error path

2016-08-24T18:12:37+00:00

[ Upstream commit 647024a7df36014bbc4479d92d88e6b77c0afcf6 ]

udriver struct allocated by kzalloc() will not be freed
if usb_register() and next calls fail. This patch fixes this
by adding one more step with kfree(udriver) in error path.

Signed-off-by: Alexey Klimov 
Acked-by: Alan Stern 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin

USB: serial: option: add support for Telit LE920A4

2016-08-24T18:12:09+00:00

[ Upstream commit 01d7956b58e644ea0d2e8d9340c5727a8fc39d70 ]

This patch adds a set of compositions for Telit LE920A4.

Compositions in short are:

0x1207: tty + tty
0x1208: tty + adb + tty + tty
0x1211: tty + adb + ecm
0x1212: tty + adb
0x1213: ecm + tty
0x1214: tty + adb + ecm + tty

telit_le922_blacklist_usbcfg3 is reused for compositions 0x1211
and 0x1214 due to the same interfaces positions.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin