linux-stable.git/drivers/usb/serial, branch v3.2.77

USB: cp210x: add ID for ELV Marble Sound Board 1

2016-02-13T10:34:06+00:00

commit f7d7f59ab124748156ea551edf789994f05da342 upstream.

Add the USB device ID for ELV Marble Sound Board 1.

Signed-off-by: Oliver Freyermuth 
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings

USB: ipaq.c: fix a timeout loop

2016-01-22T21:40:07+00:00

commit abdc9a3b4bac97add99e1d77dc6d28623afe682b upstream.

The code expects the loop to end with "retries" set to zero but, because
it is a post-op, it will end set to -1.  I have fixed this by moving the
decrement inside the loop.

Fixes: 014aa2a3c32e ('USB: ipaq: minor ipaq_open() cleanup.')
Signed-off-by: Dan Carpenter 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

USB: cp210x: Remove CP2110 ID from compatibility list

2015-12-30T02:25:57+00:00

commit 7c90e610b60cd1ed6abafd806acfaedccbbe52d1 upstream.

CP2110 ID (0x10c4, 0xea80) doesn't belong here because it's a HID
and completely different from CP210x devices.

Signed-off-by: Konstantin Shkolnyy 
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings

USB: option: add XS Stick W100-2 from 4G Systems

2015-12-30T02:25:56+00:00

commit 638148e20c7f8f6e95017fdc13bce8549a6925e0 upstream.

Thomas reports
"
4gsystems sells two total different LTE-surfsticks under the same name.
..
The newer version of XS Stick W100 is from "omega"
..
Under windows the driver switches to the same ID, and uses MI03\6 for
network and MI01\6 for modem.
..
echo "1c9e 9b01" > /sys/bus/usb/drivers/qmi_wwan/new_id
echo "1c9e 9b01" > /sys/bus/usb-serial/drivers/option1/new_id

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=9b01 Rev=02.32
S:  Manufacturer=USB Modem
S:  Product=USB Modem
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Now all important things are there:

wwp0s29f7u2i3 (net), ttyUSB2 (at), cdc-wdm0 (qmi), ttyUSB1 (at)

There is also ttyUSB0, but it is not usable, at least not for at.

The device works well with qmi and ModemManager-NetworkManager.
"

Reported-by: Thomas Schäfer 
Signed-off-by: Bjørn Mork 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

USB: ti_usb_3410_5052: Add Honeywell HGI80 ID

2015-12-30T02:25:55+00:00

commit 1bcb49e663f88bccee35b8688e6a3da2bea31fd4 upstream.

The Honeywell HGI80 is a wireless interface to the evohome connected
thermostat. It uses a TI 3410 USB-serial port.

Signed-off-by: David Woodhouse 
Signed-off-by: Johan Hovold 
[bwh: Backported to 3.2: adjust context; update array sizes]
Signed-off-by: Ben Hutchings

USB: ti_usb_3410_502: Fix ID table size

2015-12-30T02:25:55+00:00

Commit 35a2fbc941ac ("USB: serial: ti_usb_3410_5052: new device id for
Abbot strip port cable") failed to update the size of the
ti_id_table_3410 array.  This doesn't need to be fixed upstream
following commit d7ece6515e12 ("USB: ti_usb_3410_5052: remove
vendor/product module parameters") but should be fixed in stable
branches older than 3.12.

Backports of commit c9d09dc7ad10 ("USB: serial: ti_usb_3410_5052: add
Abbott strip port ID to combined table as well.") similarly failed to
update the size of the ti_id_table_combined array.

Signed-off-by: Ben Hutchings

USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well.

2015-12-30T02:25:55+00:00

commit c9d09dc7ad106492c17c587b6eeb99fe3f43e522 upstream.

Without this change, the USB cable for Freestyle Option and compatible
glucometers will not be detected by the driver.

Signed-off-by: Diego Elio Pettenò 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

USB: serial: option: add support for Novatel MiFi USB620L

2015-12-30T02:25:55+00:00

commit e07af133c3e2716db25e3e1e1d9f10c2088e9c1a upstream.

Also known as Verizon U620L.

The device is modeswitched from 1410:9020 to 1410:9022 by selecting the
4th USB configuration:

 $ sudo usb_modeswitch –v 0x1410 –p 0x9020 –u 4

This configuration provides a ECM interface as well as TTYs ('Enterprise
Mode' according to the U620 Linux integration guide).

Signed-off-by: Aleksander Morgado 
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings

USB: whiteheat: fix potential null-deref at probe

2015-10-13T02:46:11+00:00

commit cbb4be652d374f64661137756b8f357a1827d6a4 upstream.

Fix potential null-pointer dereference at probe by making sure that the
required endpoints are present.

The whiteheat driver assumes there are at least five pairs of bulk
endpoints, of which the final pair is used for the "command port". An
attempt to bind to an interface with fewer bulk endpoints would
currently lead to an oops.

Fixes CVE-2015-5257.

Reported-by: Moein Ghasemzadeh 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

USB: option: add ZTE PIDs

2015-10-13T02:46:09+00:00

commit 19ab6bc5674a30fdb6a2436b068d19a3c17dc73e upstream.

This is intended to add ZTE device PIDs on kernel.

Signed-off-by: Liu.Zhao 
[johan: sort the new entries ]
Signed-off-by: Johan Hovold 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings