linux-stable.git/drivers/usb/serial, branch v3.2.70 Linux kernel stable tree USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle 2015-08-06T23:32:14+00:00 John D. Blair johnb@candicontrols.com 2015-06-04T20:18:19+00:00 db54381f113fb48705c931216497fdb088060c36 commit df72d588c54dad57dabb3cc8a87475d8ed66d806 upstream. Added the USB serial device ID for the HubZ dual ZigBee and Z-Wave radio dongle. Signed-off-by: John D. Blair <johnb@candicontrols.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit df72d588c54dad57dabb3cc8a87475d8ed66d806 upstream.

Added the USB serial device ID for the HubZ dual ZigBee
and Z-Wave radio dongle.

Signed-off-by: John D. Blair <johnb@candicontrols.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board 2015-08-06T23:32:12+00:00 Patrick Riphagen patrick.riphagen@xsens.com 2015-05-19T08:03:01+00:00 cf80348f6420632e175f78a4163e40aedace37e6 commit 1df5b888f54070a373a73b34488cc78c2365b7b4 upstream. This adds support for new Xsens device, Motion Tracker Development Board, using Xsens' own Vendor ID Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 1df5b888f54070a373a73b34488cc78c2365b7b4 upstream.

This adds support for new Xsens device, Motion Tracker Development Board,
using Xsens' own Vendor ID

Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: pl2303: Remove support for Samsung I330 2015-08-06T23:32:08+00:00 Jason A. Donenfeld Jason@zx2c4.com 2015-04-22T12:35:08+00:00 cf24c628650f2197e69d90289e413fe0098e4df9 commit 48ef23a4f686b1e4519d4193c20d26834ff810ff upstream. This phone is already supported by the visor driver. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 48ef23a4f686b1e4519d4193c20d26834ff810ff upstream.

This phone is already supported by the visor driver.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: cp210x: add ID for KCF Technologies PRN device 2015-08-06T23:32:08+00:00 Mark Edwards sonofaforester@gmail.com 2015-04-14T12:52:34+00:00 4a7e721f7db80f4feccab1ba03398d5cb4dd0be1 commit c735ed74d83f8ecb45c4c4c95a16853c9c3c8157 upstream. Added the USB serial console device ID for KCF Technologies PRN device which has a USB port for its serial console. Signed-off-by: Mark Edwards <sonofaforester@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit c735ed74d83f8ecb45c4c4c95a16853c9c3c8157 upstream.

Added the USB serial console device ID for KCF Technologies PRN device
which has a USB port for its serial console.

Signed-off-by: Mark Edwards <sonofaforester@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: ftdi_sio: Use jtag quirk for SNAP Connect E10 2015-05-09T22:16:32+00:00 Doug Goldstein cardoe@cardoe.com 2015-03-24T01:34:48+00:00 fdb966911e4c273bdb1a7988c128f6a13d3b309d commit b229a0f840f774d29d8fedbf5deb344ca36b7f1a upstream. This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order to avoid attaching a TTY to the JTAG port as this board is based on the CALAO Systems reference design and needs the same fix up. Signed-off-by: Doug Goldstein <cardoe@cardoe.com> [johan: clean up probe logic ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit b229a0f840f774d29d8fedbf5deb344ca36b7f1a upstream.

This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order
to avoid attaching a TTY to the JTAG port as this board is based on the
CALAO Systems reference design and needs the same fix up.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
[johan: clean up probe logic ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: keyspan_pda: add new device id 2015-05-09T22:16:31+00:00 Nathaniel W Filardo nwf@cs.jhu.edu 2015-03-16T15:19:55+00:00 382e089b49c21adbd0851e7c55bf8d5040b100cd commit 5e71fc8629cefae5f3c1a4f498de3fe4f631924a upstream. Add USB VID/PID for Xircom PGMFHUB USB/serial component. (The hub and SCSI bridge on that hardware are recognized out of the box by existing drivers.) Tested VID/PID using new_id and loopback connection and was met with success, but that's all the testing done. Signed-off-by: Nathaniel Wesley Filardo <nwf@cs.jhu.edu> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 5e71fc8629cefae5f3c1a4f498de3fe4f631924a upstream.

Add USB VID/PID for Xircom PGMFHUB USB/serial component.  (The hub and SCSI
bridge on that hardware are recognized out of the box by existing drivers.)
Tested VID/PID using new_id and loopback connection and was met with
success, but that's all the testing done.

Signed-off-by: Nathaniel Wesley Filardo <nwf@cs.jhu.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: serial: keyspan_pda: fix Entrega company name spelling 2015-05-09T22:16:31+00:00 Mark Knibbs markk@clara.co.uk 2014-10-04T11:19:59+00:00 155b62716478a9328601cdd693824db0fc83aa6e commit 5f9f975b7984ffec0a25f55e58246aebf68794f4 upstream. Entrega is misspelled as Entregra or Entrgra, so fix that. Signed-off-by: Mark Knibbs <markk@clara.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 5f9f975b7984ffec0a25f55e58246aebf68794f4 upstream.

Entrega is misspelled as Entregra or Entrgra, so fix that.

Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: ftdi_sio: Added custom PID for Synapse Wireless product 2015-05-09T22:16:31+00:00 Doug Goldstein cardoe@cardoe.com 2015-03-16T02:56:04+00:00 ca2ed49671c399e43c546f1a454267c2f0ba7061 commit 4899c054a90439477b24da8977db8d738376fe90 upstream. Synapse Wireless uses the FTDI VID with a custom PID of 0x9090 for their SNAP Stick 200 product. Signed-off-by: Doug Goldstein <cardoe@cardoe.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 4899c054a90439477b24da8977db8d738376fe90 upstream.

Synapse Wireless uses the FTDI VID with a custom PID of 0x9090 for their
SNAP Stick 200 product.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards 2015-05-09T22:16:22+00:00 Max Mansfield max.m.mansfield@gmail.com 2015-03-03T01:38:02+00:00 df94ba6185a3dd47d8674d312c9a7d57973a8a9e commit c7d373c3f0da2b2b78c4b1ce5ae41485b3ef848c upstream. This patch integrates Cyber Cortex AV boards with the existing ftdi_jtag_quirk in order to use serial port 0 with JTAG which is required by the manufacturers' software. Steps: 2 [ftdi_sio_ids.h] 1. Defined the device PID [ftdi_sio.c] 2. Added a macro declaration to the ids array, in order to enable the jtag quirk for the device. Signed-off-by: Max Mansfield <max.m.mansfield@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit c7d373c3f0da2b2b78c4b1ce5ae41485b3ef848c upstream.

This patch integrates Cyber Cortex AV boards with the existing
ftdi_jtag_quirk in order to use serial port 0 with JTAG which is
required by the manufacturers' software.

Steps: 2

[ftdi_sio_ids.h]
1. Defined the device PID

[ftdi_sio.c]
2. Added a macro declaration to the ids array, in order to enable the
jtag quirk for the device.

Signed-off-by: Max Mansfield <max.m.mansfield@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: serial: cp210x: Adding Seletek device id's 2015-05-09T22:16:21+00:00 Michiel vd Garde mgparser@gmail.com 2015-02-27T01:08:29+00:00 de067f5e8e22ea1db777aa30174797d92b1d4329 commit 675af70856d7cc026be8b6ea7a8b9db10b8b38a1 upstream. These device ID's are not associated with the cp210x module currently, but should be. This patch allows the devices to operate upon connecting them to the usb bus as intended. Signed-off-by: Michiel van de Garde <mgparser@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 675af70856d7cc026be8b6ea7a8b9db10b8b38a1 upstream.

These device ID's are not associated with the cp210x module currently,
but should be. This patch allows the devices to operate upon connecting
them to the usb bus as intended.

Signed-off-by: Michiel van de Garde <mgparser@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>