linux-stable.git/drivers/usb/serial, branch v3.2.38 Linux kernel stable tree USB: io_ti: Fix NULL dereference in chase_port() 2013-02-06T04:33:38+00:00 Wolfgang Frisch wfpub@roembden.net 2013-01-17T00:07:02+00:00 7b4992729ddd232f6026c109f93d8296ca58b3ed commit 1ee0a224bc9aad1de496c795f96bc6ba2c394811 upstream. The tty is NULL when the port is hanging up. chase_port() needs to check for this. This patch is intended for stable series. The behavior was observed and tested in Linux 3.2 and 3.7.1. Johan Hovold submitted a more elaborate patch for the mainline kernel. [ 56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84 [ 56.278811] usb 1-1: USB disconnect, device number 3 [ 56.278856] usb 1-1: edge_bulk_in_callback - stopping read! [ 56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 [ 56.280536] IP: [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0 [ 56.282085] Oops: 0002 [#1] SMP [ 56.282744] Modules linked in: [ 56.283512] CPU 1 [ 56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox [ 56.283512] RIP: 0010:[<ffffffff8144e62a>] [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP: 0018:ffff88001fa99ab0 EFLAGS: 00010046 [ 56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064 [ 56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8 [ 56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000 [ 56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0 [ 56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4 [ 56.283512] FS: 0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000 [ 56.283512] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0 [ 56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80) [ 56.283512] Stack: [ 56.283512] 0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c [ 56.283512] ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001 [ 56.283512] ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296 [ 56.283512] Call Trace: [ 56.283512] [<ffffffff810578ec>] ? add_wait_queue+0x12/0x3c [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff812ffe81>] ? chase_port+0x84/0x2d6 [ 56.283512] [<ffffffff81063f27>] ? try_to_wake_up+0x199/0x199 [ 56.283512] [<ffffffff81263a5c>] ? tty_ldisc_hangup+0x222/0x298 [ 56.283512] [<ffffffff81300171>] ? edge_close+0x64/0x129 [ 56.283512] [<ffffffff810612f7>] ? __wake_up+0x35/0x46 [ 56.283512] [<ffffffff8106135b>] ? should_resched+0x5/0x23 [ 56.283512] [<ffffffff81264916>] ? tty_port_shutdown+0x39/0x44 [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff8125d38c>] ? __tty_hangup+0x307/0x351 [ 56.283512] [<ffffffff812e6ddc>] ? usb_hcd_flush_endpoint+0xde/0xed [ 56.283512] [<ffffffff8144e625>] ? _raw_spin_lock_irqsave+0x14/0x35 [ 56.283512] [<ffffffff812fd361>] ? usb_serial_disconnect+0x57/0xc2 [ 56.283512] [<ffffffff812ea99b>] ? usb_unbind_interface+0x5c/0x131 [ 56.283512] [<ffffffff8128d738>] ? __device_release_driver+0x7f/0xd5 [ 56.283512] [<ffffffff8128d9cd>] ? device_release_driver+0x1a/0x25 [ 56.283512] [<ffffffff8128d393>] ? bus_remove_device+0xd2/0xe7 [ 56.283512] [<ffffffff8128b7a3>] ? device_del+0x119/0x167 [ 56.283512] [<ffffffff812e8d9d>] ? usb_disable_device+0x6a/0x180 [ 56.283512] [<ffffffff812e2ae0>] ? usb_disconnect+0x81/0xe6 [ 56.283512] [<ffffffff812e4435>] ? hub_thread+0x577/0xe82 [ 56.283512] [<ffffffff8144daa7>] ? __schedule+0x490/0x4be [ 56.283512] [<ffffffff8105798f>] ? abort_exclusive_wait+0x79/0x79 [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff810570b4>] ? kthread+0x81/0x89 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] [<ffffffff8145387c>] ? ret_from_fork+0x7c/0xb0 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00 <f0> 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66 [ 56.283512] RIP [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP <ffff88001fa99ab0> [ 56.283512] CR2: 00000000000001c8 [ 56.283512] ---[ end trace 49714df27e1679ce ]--- Signed-off-by: Wolfgang Frisch <wfpub@roembden.net> Cc: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 1ee0a224bc9aad1de496c795f96bc6ba2c394811 upstream.

The tty is NULL when the port is hanging up.
chase_port() needs to check for this.

This patch is intended for stable series.
The behavior was observed and tested in Linux 3.2 and 3.7.1.

Johan Hovold submitted a more elaborate patch for the mainline kernel.

[   56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84
[   56.278811] usb 1-1: USB disconnect, device number 3
[   56.278856] usb 1-1: edge_bulk_in_callback - stopping read!
[   56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8
[   56.280536] IP: [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0
[   56.282085] Oops: 0002 [#1] SMP
[   56.282744] Modules linked in:
[   56.283512] CPU 1
[   56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox
[   56.283512] RIP: 0010:[<ffffffff8144e62a>]  [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.283512] RSP: 0018:ffff88001fa99ab0  EFLAGS: 00010046
[   56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064
[   56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8
[   56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000
[   56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0
[   56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4
[   56.283512] FS:  0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000
[   56.283512] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0
[   56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80)
[   56.283512] Stack:
[   56.283512]  0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c
[   56.283512]  ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001
[   56.283512]  ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296
[   56.283512] Call Trace:
[   56.283512]  [<ffffffff810578ec>] ? add_wait_queue+0x12/0x3c
[   56.283512]  [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28
[   56.283512]  [<ffffffff812ffe81>] ? chase_port+0x84/0x2d6
[   56.283512]  [<ffffffff81063f27>] ? try_to_wake_up+0x199/0x199
[   56.283512]  [<ffffffff81263a5c>] ? tty_ldisc_hangup+0x222/0x298
[   56.283512]  [<ffffffff81300171>] ? edge_close+0x64/0x129
[   56.283512]  [<ffffffff810612f7>] ? __wake_up+0x35/0x46
[   56.283512]  [<ffffffff8106135b>] ? should_resched+0x5/0x23
[   56.283512]  [<ffffffff81264916>] ? tty_port_shutdown+0x39/0x44
[   56.283512]  [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28
[   56.283512]  [<ffffffff8125d38c>] ? __tty_hangup+0x307/0x351
[   56.283512]  [<ffffffff812e6ddc>] ? usb_hcd_flush_endpoint+0xde/0xed
[   56.283512]  [<ffffffff8144e625>] ? _raw_spin_lock_irqsave+0x14/0x35
[   56.283512]  [<ffffffff812fd361>] ? usb_serial_disconnect+0x57/0xc2
[   56.283512]  [<ffffffff812ea99b>] ? usb_unbind_interface+0x5c/0x131
[   56.283512]  [<ffffffff8128d738>] ? __device_release_driver+0x7f/0xd5
[   56.283512]  [<ffffffff8128d9cd>] ? device_release_driver+0x1a/0x25
[   56.283512]  [<ffffffff8128d393>] ? bus_remove_device+0xd2/0xe7
[   56.283512]  [<ffffffff8128b7a3>] ? device_del+0x119/0x167
[   56.283512]  [<ffffffff812e8d9d>] ? usb_disable_device+0x6a/0x180
[   56.283512]  [<ffffffff812e2ae0>] ? usb_disconnect+0x81/0xe6
[   56.283512]  [<ffffffff812e4435>] ? hub_thread+0x577/0xe82
[   56.283512]  [<ffffffff8144daa7>] ? __schedule+0x490/0x4be
[   56.283512]  [<ffffffff8105798f>] ? abort_exclusive_wait+0x79/0x79
[   56.283512]  [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f
[   56.283512]  [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f
[   56.283512]  [<ffffffff810570b4>] ? kthread+0x81/0x89
[   56.283512]  [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c
[   56.283512]  [<ffffffff8145387c>] ? ret_from_fork+0x7c/0xb0
[   56.283512]  [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c
[   56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00
<f0> 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66
[   56.283512] RIP  [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.283512]  RSP <ffff88001fa99ab0>
[   56.283512] CR2: 00000000000001c8
[   56.283512] ---[ end trace 49714df27e1679ce ]---

Signed-off-by: Wolfgang Frisch <wfpub@roembden.net>
Cc: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: option: add TP-LINK HSUPA Modem MA180 2013-02-06T04:33:37+00:00 Bjørn Mork bjorn@mork.no 2013-01-15T09:29:49+00:00 157bb66c87286abc3dad2ed19a8cfb130ef24573 commit 99beb2e9687ffd61c92a9875141eabe6f57a71b9 upstream. The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 99beb2e9687ffd61c92a9875141eabe6f57a71b9 upstream.

The driver description files gives these names to the vendor specific
functions on this modem:

 Diagnostics VID_2357&PID_0201&MI_00
 NMEA        VID_2357&PID_0201&MI_01
 Modem       VID_2357&PID_0201&MI_03
 Networkcard VID_2357&PID_0201&MI_04

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: option: blacklist network interface on ONDA MT8205 4G LTE 2013-02-06T04:33:37+00:00 Bjørn Mork bjorn@mork.no 2013-01-17T14:14:22+00:00 36a2828e044669324bf324e4bdbeadd4a96039cb commit 2291dff02e5f8c708a46a7c4c888f2c467e26642 upstream. The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 2291dff02e5f8c708a46a7c4c888f2c467e26642 upstream.

The driver description files gives these names to the vendor specific
functions on this modem:

 Diag   VID_19D2&PID_0265&MI_00
 NMEA   VID_19D2&PID_0265&MI_01
 AT cmd VID_19D2&PID_0265&MI_02
 Modem  VID_19D2&PID_0265&MI_03
 Net    VID_19D2&PID_0265&MI_04

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added 2013-02-06T04:33:33+00:00 Tomasz Mloduchowski q@qdot.me 2013-01-13T22:32:53+00:00 bc20c871bc118f719ada8f5771704c7cad7ef0e5 commit 8cf65dc386f3634a43312f436cc7a935476a40c4 upstream. Simple fix to add support for Crucible Technologies COMET Caller ID USB decoder - a device containing FTDI USB/Serial converter chip, handling 1200bps CallerID messages decoded from the phone line - adding correct USB PID is sufficient. Tested to apply cleanly and work flawlessly against 3.6.9, 3.7.0-rc8 and 3.8.0-rc3 on both amd64 and x86 arches. Signed-off-by: Tomasz Mloduchowski <q@qdot.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 8cf65dc386f3634a43312f436cc7a935476a40c4 upstream.

Simple fix to add support for Crucible Technologies COMET Caller ID
USB decoder - a device containing FTDI USB/Serial converter chip,
handling 1200bps CallerID messages decoded from the phone line -
adding correct USB PID is sufficient.

Tested to apply cleanly and work flawlessly against 3.6.9, 3.7.0-rc8
and 3.8.0-rc3 on both amd64 and x86 arches.

Signed-off-by: Tomasz Mloduchowski <q@qdot.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: option: add Nexpring NP10T terminal id 2013-02-06T04:33:30+00:00 Dzianis Kahanovich mahatma@bspu.unibel.by 2012-12-03T13:06:26+00:00 5d0afa58e6045b69de6e9e7dfe23ae35279b4dd4 commit ad86e58661b38b279b7519d4e49c7a19dc1654bb upstream. Hyundai Petatel Inc. Nexpring NP10T terminal (EV-DO rev.A USB modem) ID Signed-off-by: Denis Kaganovich <mahatma@eu.by> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit ad86e58661b38b279b7519d4e49c7a19dc1654bb upstream.

Hyundai Petatel Inc. Nexpring NP10T terminal (EV-DO rev.A USB modem) ID

Signed-off-by: Denis Kaganovich <mahatma@eu.by>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: option: add Telekom Speedstick LTE II 2013-02-06T04:33:30+00:00 Bjørn Mork bjorn@mork.no 2012-12-28T16:29:52+00:00 f9a6b00c2a90a2229895d4c497d89bdaad66e4f5 commit 5ec0085440ef8c2cf50002b34d5a504ee12aa2bf upstream. also known as Alcatel One Touch L100V LTE The driver description files gives these names to the vendor specific functions on this modem: Application1: VID_1BBB&PID_011E&MI_00 Application2: VID_1BBB&PID_011E&MI_01 Modem: VID_1BBB&PID_011E&MI_03 Ethernet: VID_1BBB&PID_011E&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 5ec0085440ef8c2cf50002b34d5a504ee12aa2bf upstream.

also known as Alcatel One Touch L100V LTE

The driver description files gives these names to the vendor specific
functions on this modem:

 Application1: VID_1BBB&PID_011E&MI_00
 Application2: VID_1BBB&PID_011E&MI_01
 Modem:        VID_1BBB&PID_011E&MI_03
 Ethernet:     VID_1BBB&PID_011E&MI_04

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: option: blacklist network interface on ZTE MF880 2013-02-06T04:33:29+00:00 Bjørn Mork bjorn@mork.no 2012-12-19T14:15:17+00:00 f51d4762def5c0808b81359605d5f0cb2eb79c98 commit fab38246f318edcd0dcb8fd3852a47cf8938878a upstream. The driver description files gives these names to the vendor specific functions on this modem: diag: VID_19D2&PID_0284&MI_00 nmea: VID_19D2&PID_0284&MI_01 at: VID_19D2&PID_0284&MI_02 mdm: VID_19D2&PID_0284&MI_03 net: VID_19D2&PID_0284&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit fab38246f318edcd0dcb8fd3852a47cf8938878a upstream.

The driver description files gives these names to the vendor specific
functions on this modem:

 diag: VID_19D2&PID_0284&MI_00
 nmea: VID_19D2&PID_0284&MI_01
 at:   VID_19D2&PID_0284&MI_02
 mdm:  VID_19D2&PID_0284&MI_03
 net:  VID_19D2&PID_0284&MI_04

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: option: Add new MEDIATEK PID support 2013-02-06T04:33:29+00:00 Quentin.Li snowmanli88@163.com 2012-12-26T08:58:22+00:00 7dbea1489aef9fe5634d65a5db8ea204cbd0b17a commit 94a85b633829b946eef53fc1825d526312fb856f upstream. In option.c, add some new MEDIATEK PIDs support for MEDIATEK new products. This is a MEDIATEK inc. release patch. Signed-off-by: Quentin.Li <snowmanli88@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 94a85b633829b946eef53fc1825d526312fb856f upstream.

In option.c, add some new MEDIATEK PIDs support for MEDIATEK new products. This
is a MEDIATEK inc. release patch.

Signed-off-by: Quentin.Li <snowmanli88@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: ftdi_sio: Add support for Newport AGILIS motor drivers 2013-01-03T03:33:18+00:00 Martin Teichmann lkb.teichmann@gmail.com 2012-11-21T15:45:07+00:00 1f4cd1dd05a9d0b1ef39443e883caa85edd12916 commit d7e14b375b40c04cd735b115713043b69a2c68ac upstream. The Newport AGILIS model AG-UC8 compact piezo motor controller (http://search.newport.com/?q=*&x2=sku&q2=AG-UC8) is yet another device using an FTDI USB-to-serial chip. It works fine with the ftdi_sio driver when adding options ftdi-sio product=0x3000 vendor=0x104d to modprobe.d. udevadm reports "Newport" as the manufacturer, and "Agilis" as the product name. Signed-off-by: Martin Teichmann <lkb.teichmann@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit d7e14b375b40c04cd735b115713043b69a2c68ac upstream.

The Newport AGILIS model AG-UC8 compact piezo motor controller
(http://search.newport.com/?q=*&x2=sku&q2=AG-UC8)
is yet another device using an FTDI USB-to-serial chip. It works
fine with the ftdi_sio driver when adding

  options ftdi-sio product=0x3000 vendor=0x104d

to modprobe.d. udevadm reports "Newport" as the manufacturer,
and "Agilis" as the product name.

Signed-off-by: Martin Teichmann <lkb.teichmann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: ftdi_sio: fixup BeagleBone A5+ quirk 2013-01-03T03:33:17+00:00 Peter Korsgaard jacmet@sunsite.dk 2012-11-22T15:30:46+00:00 ea337d41d5c6f65d9fb4a19176f9f2a2cca5398d commit 1a88d5eee2ef2ad1d3c4e32043e9c4c5347d4fc1 upstream. BeagleBone A5+ devices ended up getting shipped with the 'BeagleBone/XDS100V2' product string, and not XDS100 like it was agreed, so adjust the quirk to match. For details, see the thread on the beagle list: https://groups.google.com/forum/#!msg/beagleboard/zrFPew9_Wvo/ibWr1-eE8JwJ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 1a88d5eee2ef2ad1d3c4e32043e9c4c5347d4fc1 upstream.

BeagleBone A5+ devices ended up getting shipped with the
'BeagleBone/XDS100V2' product string, and not XDS100 like it
was agreed, so adjust the quirk to match.

For details, see the thread on the beagle list:

https://groups.google.com/forum/#!msg/beagleboard/zrFPew9_Wvo/ibWr1-eE8JwJ

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>