linux-stable.git/drivers/usb/serial, branch v3.18.78

USB: serial: metro-usb: add MS7820 device id

2017-10-27T08:17:22+00:00

commit 31dc3f819bac28a0990b36510197560258ab7421 upstream.

Add device-id entry for (Honeywell) Metrologic MS7820 bar code scanner.

The device has two interfaces (in this mode?); a vendor-specific
interface with two interrupt endpoints and a second HID interface, which
we do not bind to.

Reported-by: Ladislav Dobrovsky 
Tested-by: Ladislav Dobrovsky 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: console: fix use-after-free after failed setup

2017-10-18T07:15:16+00:00

commit 299d7572e46f98534033a9e65973f13ad1ce9047 upstream.

Make sure to reset the USB-console port pointer when console setup fails
in order to avoid having the struct usb_serial be prematurely freed by
the console code when the device is later disconnected.

Fixes: 73e487fdb75f ("[PATCH] USB console: fix disconnection issues")
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: qcserial: add Dell DW5818, DW5819

2017-10-18T07:15:16+00:00

commit f5d9644c5fca7d8e8972268598bb516a7eae17f9 upstream.

Dell Wireless 5819/5818 devices are re-branded Sierra Wireless MC74
series which will by default boot with vid 0x413c and pid's 0x81cf,
0x81d0, 0x81d1, 0x81d2.

Signed-off-by: Shrirang Bagul 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add support for TP-Link LTE module

2017-10-18T07:15:16+00:00

commit 837ddc4793a69b256ac5e781a5e729b448a8d983 upstream.

This commit adds support for TP-Link LTE mPCIe module is used
in in TP-Link MR200v1, MR6400v1 and v2 routers.

Signed-off-by: Henryk Heisig 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: add support for ELV TFD500

2017-10-18T07:15:16+00:00

commit c496ad835c31ad639b6865714270b3003df031f6 upstream.

Add the USB device id for the ELV TFD500 data logger.

Signed-off-by: Andreas Engel 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: mos7840: fix control-message error handling

2017-10-08T08:11:20+00:00

[ Upstream commit cd8db057e93ddaacbec025b567490555d2bca280 ]

Make sure to detect short transfers when reading a device register.

The modem-status handling had sufficient error checks in place, but move
handling of short transfers into the register accessor function itself
for consistency.

Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

USB: serial: mos7720: fix control-message error handling

2017-10-08T08:11:20+00:00

[ Upstream commit 0d130367abf582e7cbf60075c2a7ab53817b1d14 ]

Make sure to log an error on short transfers when reading a device
register.

Also clear the provided buffer (which if often an uninitialised
automatic variable) on errors as the driver currently does not bother to
check for errors.

Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add support for D-Link DWM-157 C1

2017-09-13T21:03:45+00:00

commit 169e86546f5712179709de23cd64bbb15f199fab upstream.

This commit adds support (an ID, really) for D-Link DWM-157 hardware
version C1 USB modem to option driver.

According to manufacturer-provided Windows INF file the device has four
serial ports:
"D-Link HSPA+DataCard Diagnostics Interface" (interface 2; modem port),
"D-Link HSPA+DataCard NMEA Device" (interface 3),
"D-Link HSPA+DataCard Speech Port" (interface 4),
"D-Link HSPA+DataCard Debug Port" (interface 5).

usb-devices output:
T:  Bus=05 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7d0e Rev=03.00
S:  Manufacturer=D-Link,Inc
S:  Product=D-Link DWM-157
C:  #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Signed-off-by: Maciej S. Szmigiero 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: add support for Qivicon USB ZigBee dongle

2017-08-16T20:35:30+00:00

commit 9585e340db9f6cc1c0928d82c3a23cc4460f0a3f upstream.

The German Telekom offers a ZigBee USB Stick under the brand name Qivicon
for their SmartHome Home Base in its 1. Generation. The productId is not
known by the according kernel module, this patch adds support for it.

Signed-off-by: Stefan Triller 
Reviewed-by: Frans Klaver 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add D-Link DWM-222 device ID

2017-08-16T20:35:30+00:00

commit fd1b8668af59a11bb754a6c9b0051c6c5ce73b74 upstream.

Add device id for D-Link DWM-222.

Signed-off-by: Hector Martin 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman