linux-stable.git/drivers/usb/serial, branch v3.18.124 Linux kernel stable tree USB: serial: simple: add Motorola Tetra MTP6550 id 2018-10-13T07:09:31+00:00 Johan Hovold johan@kernel.org 2018-09-24T13:28:10+00:00 974abf888c6a227b3578737ec925872e19b70baf commit f5fad711c06e652f90f581fc7c2caee327c33d31 upstream. Add device-id for the Motorola Tetra radio MTP6550. Bus 001 Device 004: ID 0cad:9012 Motorola CGISS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9012 bcdDevice 24.16 iManufacturer 1 Motorola Solutions, Inc. iProduct 2 TETRA PEI interface iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 55 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 Generic Serial config bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Reported-by: Hans Hult <hanshult35@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f5fad711c06e652f90f581fc7c2caee327c33d31 upstream.

Add device-id for the Motorola Tetra radio MTP6550.

Bus 001 Device 004: ID 0cad:9012 Motorola CGISS
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0cad Motorola CGISS
  idProduct          0x9012
  bcdDevice           24.16
  iManufacturer           1 Motorola Solutions, Inc.
  iProduct                2 TETRA PEI interface
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           55
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          3 Generic Serial config
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Reported-by: Hans Hult <hanshult35@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: kobil_sct: fix modem-status error handling 2018-10-13T07:09:24+00:00 Johan Hovold johan@kernel.org 2018-07-04T15:02:18+00:00 ec9147bf4f142d04086953591512a41c1c8da5c7 [ Upstream commit a420b5d939ee58f1d950f0ea782834056520aeaa ] Make sure to return -EIO in case of a short modem-status read request. While at it, split the debug message to not include the (zeroed) transfer-buffer content in case of errors. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit a420b5d939ee58f1d950f0ea782834056520aeaa ]

Make sure to return -EIO in case of a short modem-status read request.

While at it, split the debug message to not include the (zeroed)
transfer-buffer content in case of errors.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: ti_usb_3410_5052: fix array underflow in completion handler 2018-09-26T06:33:59+00:00 Johan Hovold johan@kernel.org 2018-08-21T09:59:53+00:00 66688f6191c9299ccb8ccf3e1dc99cc59b194587 commit 5dfdd24eb3d39d815bc952ae98128e967c9bba49 upstream. Similarly to a recently reported bug in io_ti, a malicious USB device could set port_number to a negative value and we would underflow the port array in the interrupt completion handler. As these devices only have one or two ports, fix this by making sure we only consider the seventh bit when determining the port number (and ignore bits 0xb0 which are typically set to 0x30). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5dfdd24eb3d39d815bc952ae98128e967c9bba49 upstream.

Similarly to a recently reported bug in io_ti, a malicious USB device
could set port_number to a negative value and we would underflow the
port array in the interrupt completion handler.

As these devices only have one or two ports, fix this by making sure we
only consider the seventh bit when determining the port number (and
ignore bits 0xb0 which are typically set to 0x30).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: io_ti: fix array underflow in completion handler 2018-09-26T06:33:57+00:00 Johan Hovold johan@kernel.org 2018-08-21T09:59:52+00:00 a9cdf4ce5cb8ccda956400c636829df67cb59ad6 commit 691a03cfe8ca483f9c48153b869d354e4ae3abef upstream. As reported by Dan Carpenter, a malicious USB device could set port_number to a negative value and we would underflow the port array in the interrupt completion handler. As these devices only have one or two ports, fix this by making sure we only consider the seventh bit when determining the port number (and ignore bits 0xb0 which are typically set to 0x30). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 691a03cfe8ca483f9c48153b869d354e4ae3abef upstream.

As reported by Dan Carpenter, a malicious USB device could set
port_number to a negative value and we would underflow the port array in
the interrupt completion handler.

As these devices only have one or two ports, fix this by making sure we
only consider the seventh bit when determining the port number (and
ignore bits 0xb0 which are typically set to 0x30).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: sierra: fix potential deadlock at close 2018-08-28T05:21:32+00:00 John Ogness john.ogness@linutronix.de 2018-06-23T22:32:11+00:00 382627a4da357d169e7a2011970d76273dec39fe commit e60870012e5a35b1506d7b376fddfb30e9da0b27 upstream. The portdata spinlock can be taken in interrupt context (via sierra_outdat_callback()). Disable interrupts when taking the portdata spinlock when discarding deferred URBs during close to prevent a possible deadlock. Fixes: 014333f77c0b ("USB: sierra: fix urb and memory leak on disconnect") Cc: stable <stable@vger.kernel.org> Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ johan: amend commit message and add fixes and stable tags ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e60870012e5a35b1506d7b376fddfb30e9da0b27 upstream.

The portdata spinlock can be taken in interrupt context (via
sierra_outdat_callback()).
Disable interrupts when taking the portdata spinlock when discarding
deferred URBs during close to prevent a possible deadlock.

Fixes: 014333f77c0b ("USB: sierra: fix urb and memory leak on disconnect")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ johan: amend commit message and add fixes and stable tags ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: mos7840: fix status-register error handling 2018-07-22T11:43:23+00:00 Johan Hovold johan@kernel.org 2018-07-04T15:02:17+00:00 a10a393dc9fdfc93cbe5daa5c80e153ae1edd5f3 commit 794744abfffef8b1f3c0c8a4896177d6d13d653d upstream. Add missing transfer-length sanity check to the status-register completion handler to avoid leaking bits of uninitialised slab data to user space. Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver") Cc: stable <stable@vger.kernel.org> # 2.6.19 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 794744abfffef8b1f3c0c8a4896177d6d13d653d upstream.

Add missing transfer-length sanity check to the status-register
completion handler to avoid leaking bits of uninitialised slab data to
user space.

Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver")
Cc: stable <stable@vger.kernel.org>     # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: keyspan_pda: fix modem-status error handling 2018-07-22T11:43:23+00:00 Johan Hovold johan@kernel.org 2018-07-04T15:02:16+00:00 81739d0b623ebba7c63a9529ef53845dfda86e89 commit 01b3cdfca263a17554f7b249d20a247b2a751521 upstream. Fix broken modem-status error handling which could lead to bits of slab data leaking to user space. Fixes: 3b36a8fd6777 ("usb: fix uninitialized variable warning in keyspan_pda") Cc: stable <stable@vger.kernel.org> # 2.6.27 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 01b3cdfca263a17554f7b249d20a247b2a751521 upstream.

Fix broken modem-status error handling which could lead to bits of slab
data leaking to user space.

Fixes: 3b36a8fd6777 ("usb: fix uninitialized variable warning in keyspan_pda")
Cc: stable <stable@vger.kernel.org>     # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: visor: handle potential invalid device configuration 2018-05-16T08:05:16+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2018-04-29T15:41:55+00:00 98db87df4c01943c54e41cea5dd6249f9f43100f commit 4842ed5bfcb9daf6660537d70503c18d38dbdbb8 upstream. If we get an invalid device configuration from a palm 3 type device, we might incorrectly parse things, and we have the potential to crash in "interesting" ways. Fix this up by verifying the size of the configuration passed to us by the device, and only if it is correct, will we handle it. Note that this also fixes an information leak of slab data. Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ johan: add comment about the info leak ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4842ed5bfcb9daf6660537d70503c18d38dbdbb8 upstream.

If we get an invalid device configuration from a palm 3 type device, we
might incorrectly parse things, and we have the potential to crash in
"interesting" ways.

Fix this up by verifying the size of the configuration passed to us by
the device, and only if it is correct, will we handle it.

Note that this also fixes an information leak of slab data.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: add comment about the info leak ]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: cp210x: add ID for NI USB serial console 2018-05-02T14:59:53+00:00 Kyle Roeschley kyle.roeschley@ni.com 2018-04-09T15:23:55+00:00 a67a3e7cd8e4ccdf148cacd635d55bc51a282984 commit 1e23aace21515a8f7615a1de016c0ea8d4e0cc6e upstream. Added the USB VID and PID for the USB serial console on some National Instruments devices. Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1e23aace21515a8f7615a1de016c0ea8d4e0cc6e upstream.

Added the USB VID and PID for the USB serial console on some National
Instruments devices.

Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: ftdi_sio: use jtag quirk for Arrow USB Blaster 2018-05-02T14:59:53+00:00 Vasyl Vavrychuk vvavrychuk@gmail.com 2018-04-11T14:05:13+00:00 915224d505955eb1366d027b8a08c7fb3d4ef4a0 commit 470b5d6f0cf4674be2d1ec94e54283a1770b6a1a upstream. Arrow USB Blaster integrated on MAX1000 board uses the same vendor ID (0x0403) and product ID (0x6010) as the "original" FTDI device. This patch avoids picking up by ftdi_sio of the first interface of this USB device. After that this device can be used by Arrow user-space JTAG driver. Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 470b5d6f0cf4674be2d1ec94e54283a1770b6a1a upstream.

Arrow USB Blaster integrated on MAX1000 board uses the same vendor ID
(0x0403) and product ID (0x6010) as the "original" FTDI device.

This patch avoids picking up by ftdi_sio of the first interface of this
USB device. After that this device can be used by Arrow user-space JTAG
driver.

Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>