linux-stable.git/drivers/usb/serial, branch v3.16.76

USB: serial: ftdi_sio: add ID for isodebug v1

2019-10-31T22:15:00+00:00

commit f8377eff548170e8ea8022c067a1fbdf9e1c46a8 upstream.

This adds the vid:pid of the isodebug v1 isolated JTAG/SWD+UART. Only the
second channel is available for use as a serial port.

Signed-off-by: Andreas Fritiofson 
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings

USB: serial: option: add support for GosunCn ME3630 RNDIS mode

2019-10-31T22:14:56+00:00

commit aed2a26283528fb69c38e414f649411aa48fb391 upstream.

Added USB IDs for GosunCn ME3630 cellular module in RNDIS mode.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=03 Dev#= 18 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0601 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=b950269c
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

Signed-off-by: Jörgen Storvist 
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings

USB: serial: option: add GosunCn ZTE WeLink ME3630

2019-10-31T22:14:55+00:00

commit 70a7444c550a75584ffcfae95267058817eff6a7 upstream.

Added USB serial option driver support for GosunCn ZTE WeLink ME3630
series cellular modules for USB modes ECM/NCM and MBIM.

usb-devices output MBIM mode:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0602 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim

usb-devices output ECM/NCM mode:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=1476 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether

Signed-off-by: Jörgen Storvist 
Signed-off-by: Johan Hovold 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

USB: serial: pl2303: add Allied Telesis VT-Kit3

2019-10-05T15:19:40+00:00

commit c5f81656a18b271976a86724dadd8344e54de74e upstream.

This is adds the vendor and device id for the AT-VT-Kit3 which is a
pl2303-based device.

Signed-off-by: Chris Packham 
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings

USB: serial: fix unthrottle races

2019-09-23T20:11:57+00:00

commit 3f5edd58d040bfa4b74fb89bc02f0bc6b9cd06ab upstream.

Fix two long-standing bugs which could potentially lead to memory
corruption or leave the port throttled until it is reopened (on weakly
ordered systems), respectively, when read-URB completion races with
unthrottle().

First, the URB must not be marked as free before processing is complete
to prevent it from being submitted by unthrottle() on another CPU.

	CPU 1				CPU 2
	================		================
	complete()			unthrottle()
	  process_urb();
	  smp_mb__before_atomic();
	  set_bit(i, free);		  if (test_and_clear_bit(i, free))
	  					  submit_urb();

Second, the URB must be marked as free before checking the throttled
flag to prevent unthrottle() on another CPU from failing to observe that
the URB needs to be submitted if complete() sees that the throttled flag
is set.

	CPU 1				CPU 2
	================		================
	complete()			unthrottle()
	  set_bit(i, free);		  throttled = 0;
	  smp_mb__after_atomic();	  smp_mb();
	  if (throttled)		  if (test_and_clear_bit(i, free))
	  	  return;			  submit_urb();

Note that test_and_clear_bit() only implies barriers when the test is
successful. To handle the case where the URB is still in use an explicit
barrier needs to be added to unthrottle() for the second race condition.

Fixes: d83b405383c9 ("USB: serial: add support for multiple read urbs")
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings

USB: serial: use variable for status

2019-09-23T20:11:57+00:00

commit 3161da970d38cd6ed2ba8cadec93874d1d06e11e upstream.

This patch turns status in a variable read once from the URB.
The long term plan is to deliver status to the callback.
In addition it makes the code a bit more elegant.

Signed-off-by: Oliver Neukum 
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings

USB: serial: fix initial-termios handling

2019-09-23T20:11:53+00:00

commit 579bebe5dd522580019e7b10b07daaf500f9fb1e upstream.

The USB-serial driver init_termios callback is used to override the
default initial terminal settings provided by USB-serial core.

After a bug was fixed in the original implementation introduced by
commit fe1ae7fdd2ee ("tty: USB serial termios bits"), the init_termios
callback was no longer called just once on first use as intended but
rather on every (first) open.

This specifically meant that the terminal settings saved on (final)
close were ignored when reopening a port for drivers overriding the
initial settings.

Also update the outdated function header referring to the creation of
termios objects.

Fixes: 7e29bb4b779f ("usb-serial: fix termios initialization logic")
Signed-off-by: Johan Hovold 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

USB: serial: cp210x: add new device id

2019-08-13T11:38:56+00:00

commit a595ecdd5f60b2d93863cebb07eec7f935839b54 upstream.

Lorenz Messtechnik has a device that is controlled by the cp210x driver,
so add the device id to the driver.  The device id was provided by
Silicon-Labs for the devices from this vendor.

Reported-by: Uli 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings

USB: serial: mos7720: fix mos_parport refcount imbalance on error path

2019-08-13T11:38:50+00:00

commit 2908b076f5198d231de62713cb2b633a3a4b95ac upstream.

The write_parport_reg_nonblock() helper takes a reference to the struct
mos_parport, but failed to release it in a couple of error paths after
allocation failures, leading to a memory leak.

Johan said that move the kref_get() and mos_parport assignment to the
end of urbtrack initialisation is a better way, so move it. and
mos_parport do not used until urbtrack initialisation.

Signed-off-by: Lin Yi 
Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715")
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings

USB: serial: ftdi_sio: add additional NovaTech products

2019-08-13T11:38:45+00:00

commit 422c2537ba9d42320f8ab6573940269f87095320 upstream.

Add PIDs for the NovaTech OrionLX+ and Orion I/O so they can be
automatically detected.

Signed-off-by: George McCollister 
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings