linux-stable.git/drivers/usb/serial, branch v3.16.2

USB: whiteheat: Added bounds checking for bulk command response

2014-09-05T23:36:41+00:00

commit 6817ae225cd650fb1c3295d769298c38b1eba818 upstream.

This patch fixes a potential security issue in the whiteheat USB driver
which might allow a local attacker to cause kernel memory corrpution. This
is due to an unchecked memcpy into a fixed size buffer (of 64 bytes). On
EHCI and XHCI busses it's possible to craft responses greater than 64
bytes leading a buffer overflow.

Signed-off-by: James Forshaw 
Signed-off-by: Greg Kroah-Hartman

USB: ftdi_sio: Added PID for new ekey device

2014-09-05T23:36:41+00:00

commit 646907f5bfb0782c731ae9ff6fb63471a3566132 upstream.

Added support to the ftdi_sio driver for ekey Converter USB which
uses an FT232BM chip.

Signed-off-by: Jaša Bartelj 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: ftdi_sio: add Basic Micro ATOM Nano USB2Serial PID

2014-09-05T23:36:41+00:00

commit 6552cc7f09261db2aeaae389aa2c05a74b3a93b4 upstream.

Add device id for Basic Micro ATOM Nano USB2Serial adapters.

Reported-by: Nicolas Alt 
Tested-by: Nicolas Alt 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: Add support for new Xsens devices

2014-09-05T23:36:25+00:00

commit 4bdcde358b4bda74e356841d351945ca3f2245dd upstream.

This adds support for new Xsens devices, using Xsens' own Vendor ID.

Signed-off-by: Patrick Riphagen 
Signed-off-by: Frans Klaver 
Cc: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: Annotate the current Xsens PID assignments

2014-09-05T23:36:25+00:00

commit 9273b8a270878906540349422ab24558b9d65716 upstream.

The converters are used in specific products. It can be useful to know
which they are exactly.

Signed-off-by: Patrick Riphagen 
Signed-off-by: Frans Klaver 
Cc: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: Add Infineon Triboard

2014-07-12T01:22:38+00:00

This adds support for Infineon TriBoard TC1798 [1]. Only interface 1
is used as serial line (see [2], Figure 8-6).

[1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268
[2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a

Signed-off-by: Michal Sojka 
Cc: Johan Hovold 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

USB: ftdi_sio: Add extra PID.

2014-07-09T23:27:40+00:00

This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the
Testo 435-4 uses this, likely other gear as well.

Signed-off-by: Bert Vermeulen 
Cc: Johan Hovold 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usb: option: Add ID for Telewell TW-LTE 4G v2

2014-07-07T08:31:14+00:00

Add ID of the Telewell 4G v2 hardware to option driver to get legacy
serial interface working

Signed-off-by: Bernd Wachter 
Cc: 
Signed-off-by: Johan Hovold

USB: cp210x: add support for Corsair usb dongle

2014-07-07T08:28:18+00:00

Corsair USB Dongles are shipped with Corsair AXi series PSUs.
These are cp210x serial usb devices, so make driver detect these.
I have a program, that can get information from these PSUs.

Tested with 2 different dongles shipped with Corsair AX860i and
AX1200i units.

Signed-off-by: Andras Kovacs 
Cc: 
Signed-off-by: Johan Hovold

usb: option: add/modify Olivetti Olicard modems

2014-06-23T10:27:42+00:00

Adding a couple of Olivetti modems and blacklisting the net
function on a couple which are already supported.

Reported-by: Lars Melin 
Cc: 
Signed-off-by: Bjørn Mork 
Signed-off-by: Johan Hovold