linux-stable.git/drivers/usb/serial, branch v3.10.97 Linux kernel stable tree USB: option: fix Cinterion AHxx enumeration 2016-02-19T22:22:40+00:00 John Ernberg john.ernberg@actia.se 2016-01-25T12:27:17+00:00 4478e2240dfbbd5491d5aaf9c92e5fb603f1bfdd commit 4152b387da81617c80cb2946b2d56e3958906b3e upstream. In certain kernel configurations where the cdc_ether and option drivers are compiled as modules there can occur a race condition in enumeration. This causes the option driver to enumerate the ethernet(wwan) interface as usb-serial interfaces. usb-devices output for the modem: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=0055 Rev=00.00 S: Manufacturer=Cinterion S: Product=AHx C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: John Ernberg <john.ernberg@actia.se> Fixes: 1941138e1c02 ("USB: added support for Cinterion's products...") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4152b387da81617c80cb2946b2d56e3958906b3e upstream.

In certain kernel configurations where the cdc_ether and option drivers
are compiled as modules there can occur a race condition in enumeration.
This causes the option driver to enumerate the ethernet(wwan) interface
as usb-serial interfaces.

usb-devices output for the modem:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=0055 Rev=00.00
S:  Manufacturer=Cinterion
S:  Product=AHx
C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether

Signed-off-by: John Ernberg <john.ernberg@actia.se>
Fixes: 1941138e1c02 ("USB: added support for Cinterion's products...")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: option: Adding support for Telit LE922 2016-02-19T22:22:40+00:00 Daniele Palmas dnlplm@gmail.com 2016-01-12T16:22:06+00:00 3bee9e6e206d990619cdb3a62df7cef89eb919b4 commit ff4e2494dc17b173468e1713fdf6237fd8578bc7 upstream. This patch adds support for two PIDs of LE922. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ff4e2494dc17b173468e1713fdf6237fd8578bc7 upstream.

This patch adds support for two PIDs of LE922.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cp210x: add ID for IAI USB to RS485 adaptor 2016-02-19T22:22:40+00:00 Peter Dedecker peter.dedecker@hotmail.com 2016-01-08T11:34:41+00:00 e193199af5199c771e1d38e03349d94969759d3b commit f487c54ddd544e1c9172cd510954f697b77b76e3 upstream. Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by: Peter Dedecker <peter.dedecker@hotmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f487c54ddd544e1c9172cd510954f697b77b76e3 upstream.

Added the USB serial console device ID for IAI Corp. RCB-CV-USB
USB to RS485 adaptor.

Signed-off-by: Peter Dedecker <peter.dedecker@hotmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable 2016-02-19T22:22:40+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2016-01-20T07:43:13+00:00 03b987cbcf2d1b012e95f9530a2652237a721326 commit e03cdf22a2727c60307be6a729233edab3bfda9c upstream. Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by: Harald Linden <harald.linden@7183.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e03cdf22a2727c60307be6a729233edab3bfda9c upstream.

Harald Linden reports that the ftdi_sio driver works properly for the
Yaesu SCU-18 cable if the device ids are added to the driver.  So let's
add them.

Reported-by: Harald Linden <harald.linden@7183.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: visor: fix null-deref at probe 2016-02-19T22:22:40+00:00 Johan Hovold johan@kernel.org 2016-01-12T11:05:20+00:00 f1a9ca0d6949ec920c7e34a1eb48dbf55e84f8ed commit cac9b50b0d75a1d50d6c056ff65c005f3224c8e0 upstream. Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cac9b50b0d75a1d50d6c056ff65c005f3224c8e0 upstream.

Fix null-pointer dereference at probe should a (malicious) Treo device
lack the expected endpoints.

Specifically, the Treo port-setup hack was dereferencing the bulk-in and
interrupt-in urbs without first making sure they had been allocated by
core.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: visor: fix crash on detecting device without write_urbs 2016-02-19T22:22:40+00:00 Vladis Dronov vdronov@redhat.com 2016-01-12T14:10:50+00:00 3b079e37731a962211c65e9aff9928f3ac2e6840 commit cb3232138e37129e88240a98a1d2aba2187ff57c upstream. The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Fixes: cfb8da8f69b8 ("USB: visor: fix initialisation of UX50/TH55 devices") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cb3232138e37129e88240a98a1d2aba2187ff57c upstream.

The visor driver crashes in clie_5_attach() when a specially crafted USB
device without bulk-out endpoint is detected. This fix adds a check that
the device has proper configuration expected by the driver.

Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Fixes: cfb8da8f69b8 ("USB: visor: fix initialisation of UX50/TH55 devices")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ti_usb_3410_502: Fix ID table size 2016-02-19T22:22:40+00:00 Ben Hutchings ben@decadent.org.uk 2015-12-23T13:25:54+00:00 24e1fdb327b97cde4ff92e7ceca86f9882a723e6 Commit 35a2fbc941ac ("USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable") failed to update the size of the ti_id_table_3410 array. This doesn't need to be fixed upstream following commit d7ece6515e12 ("USB: ti_usb_3410_5052: remove vendor/product module parameters") but should be fixed in stable branches older than 3.12. Backports of commit c9d09dc7ad10 ("USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well.") similarly failed to update the size of the ti_id_table_combined array. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Commit 35a2fbc941ac ("USB: serial: ti_usb_3410_5052: new device id for
Abbot strip port cable") failed to update the size of the
ti_id_table_3410 array.  This doesn't need to be fixed upstream
following commit d7ece6515e12 ("USB: ti_usb_3410_5052: remove
vendor/product module parameters") but should be fixed in stable
branches older than 3.12.

Backports of commit c9d09dc7ad10 ("USB: serial: ti_usb_3410_5052: add
Abbott strip port ID to combined table as well.") similarly failed to
update the size of the ti_id_table_combined array.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cp210x: add ID for ELV Marble Sound Board 1 2016-01-29T05:49:32+00:00 Oliver Freyermuth o.freyermuth@googlemail.com 2015-12-28T17:37:38+00:00 c4924b5c530a9fdd4df55868e0bbb593d91fe444 commit f7d7f59ab124748156ea551edf789994f05da342 upstream. Add the USB device ID for ELV Marble Sound Board 1. Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f7d7f59ab124748156ea551edf789994f05da342 upstream.

Add the USB device ID for ELV Marble Sound Board 1.

Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ipaq.c: fix a timeout loop 2016-01-29T05:49:32+00:00 Dan Carpenter dan.carpenter@oracle.com 2015-12-16T11:06:37+00:00 5dbf71c9f68021abb944cca8184b9bb4267c7b9d commit abdc9a3b4bac97add99e1d77dc6d28623afe682b upstream. The code expects the loop to end with "retries" set to zero but, because it is a post-op, it will end set to -1. I have fixed this by moving the decrement inside the loop. Fixes: 014aa2a3c32e ('USB: ipaq: minor ipaq_open() cleanup.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit abdc9a3b4bac97add99e1d77dc6d28623afe682b upstream.

The code expects the loop to end with "retries" set to zero but, because
it is a post-op, it will end set to -1.  I have fixed this by moving the
decrement inside the loop.

Fixes: 014aa2a3c32e ('USB: ipaq: minor ipaq_open() cleanup.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cp210x: Remove CP2110 ID from compatibility list 2016-01-23T03:47:53+00:00 Konstantin Shkolnyy konstantin.shkolnyy@gmail.com 2015-11-10T22:40:13+00:00 e68f3e07d9f90b08083e903e24361241e0c9e0c7 commit 7c90e610b60cd1ed6abafd806acfaedccbbe52d1 upstream. CP2110 ID (0x10c4, 0xea80) doesn't belong here because it's a HID and completely different from CP210x devices. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7c90e610b60cd1ed6abafd806acfaedccbbe52d1 upstream.

CP2110 ID (0x10c4, 0xea80) doesn't belong here because it's a HID
and completely different from CP210x devices.

Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>