linux-stable.git/drivers/usb/serial, branch v3.0.42 Linux kernel stable tree usb: serial: mos7840: Fixup mos7840_chars_in_buffer() 2012-08-26T22:12:13+00:00 Mark Ferrell mferrell@uplogix.com 2012-07-24T19:15:13+00:00 edbc37fd3930900161aca75dd3684825179ca091 commit 5c263b92f828af6a8cf54041db45ceae5af8f2ab upstream. * Use the buffer content length as opposed to the total buffer size. This can be a real problem when using the mos7840 as a usb serial-console as all kernel output is truncated during boot. Signed-off-by: Mark Ferrell <mferrell@uplogix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5c263b92f828af6a8cf54041db45ceae5af8f2ab upstream.

 * Use the buffer content length as opposed to the total buffer size.  This can
   be a real problem when using the mos7840 as a usb serial-console as all
   kernel output is truncated during boot.

Signed-off-by: Mark Ferrell <mferrell@uplogix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ftdi_sio: Add VID/PID for Kondo Serial USB 2012-08-26T22:12:12+00:00 Ozan Çağlayan ozancag@gmail.com 2012-08-10T14:25:10+00:00 d0f56add7cd65221d04964de9cc78bddebe2ecae commit 7724a1edbe463b06d4e7831a41149ba095b16c53 upstream. This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter interface: http://www.kondo-robot.com/EN/wp/?cat=28 Tested by controlling an RCB3 board using libRCB3. Signed-off-by: Ozan Çağlayan <ozancag@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7724a1edbe463b06d4e7831a41149ba095b16c53 upstream.

This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter
interface:
http://www.kondo-robot.com/EN/wp/?cat=28

Tested by controlling an RCB3 board using libRCB3.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add ZTE K5006-Z 2012-08-26T22:12:12+00:00 Bjørn Mork bjorn@mork.no 2012-08-15T13:43:33+00:00 bb82df1a3fd0ab9ddab5134abe3e79917cd90954 commit f1b5c997e68533df1f96dcd3068a231bca495603 upstream. The ZTE (Vodafone) K5006-Z use the following interface layout: 00 DIAG 01 secondary 02 modem 03 networkcard 04 storage Ignoring interface #3 which is handled by the qmi_wwan driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f1b5c997e68533df1f96dcd3068a231bca495603 upstream.

The ZTE (Vodafone) K5006-Z use the following
interface layout:

00 DIAG
01 secondary
02 modem
03 networkcard
04 storage

Ignoring interface #3 which is handled by the qmi_wwan
driver.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: support the new interfaces of Huawei Data Card devices in option driver 2012-08-26T22:12:12+00:00 fangxiaozhi huananhu@huawei.com 2012-08-08T09:24:45+00:00 0dfcf2c7d9488159970a9753e15ccb8b0d0cecec commit ee6f827df9107139e8960326e49e1376352ced4d upstream. In this patch, we add new declarations into option.c to support the new interfaces of Huawei Data Card devices. And at the same time, remove the redundant declarations from option.c. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ee6f827df9107139e8960326e49e1376352ced4d upstream.

In this patch, we add new declarations into option.c to support the new
interfaces of Huawei Data Card devices. And at the same time, remove the
redundant declarations from option.c.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: Add MEDIATEK product ids 2012-07-16T15:47:50+00:00 Gaosen Zhang gaosen.zhang@mediatek.com 2012-07-05T13:49:00+00:00 2be9ba94c3fa8b6ae608b8d02930a144afa6ee62 commit aacef9c561a693341566a6850c451ce3df68cb9a upstream. Signed-off-by: Gaosen Zhang <gaosen.zhang@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit aacef9c561a693341566a6850c451ce3df68cb9a upstream.

Signed-off-by: Gaosen Zhang <gaosen.zhang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add ZTE MF60 2012-07-16T15:47:50+00:00 Bjørn Mork bjorn@mork.no 2012-07-02T17:53:55+00:00 3f029b4965222ae903fad68cd89da60741458a3e commit 8e16e33c168a6efd0c9f7fa9dd4c1e1db9a74553 upstream. Switches into a composite device by ejecting the initial driver CD. The four interfaces are: QCDM, AT, QMI/wwan and mass storage. Let this driver manage the two serial interfaces: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 28 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1402 Rev= 0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE WCDMA Technologies MSM S: SerialNumber=xxxxx C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8e16e33c168a6efd0c9f7fa9dd4c1e1db9a74553 upstream.

Switches into a composite device by ejecting the initial
driver CD.  The four interfaces are: QCDM, AT, QMI/wwan
and mass storage.  Let this driver manage the two serial
interfaces:

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 28 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=1402 Rev= 0.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE WCDMA Technologies MSM
S:  SerialNumber=xxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: CP210x Add 10 Device IDs 2012-07-16T15:47:48+00:00 Craig Shelley craig@microtron.org.uk 2012-06-26T22:20:04+00:00 45412136e830b9f5f80785a3e7d616d1b96fef52 commit 3fcc8f96829776cf181918461923d1e3bbb831a2 upstream. This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3fcc8f96829776cf181918461923d1e3bbb831a2 upstream.

This patch adds 10 device IDs for CP210x based devices from the following manufacturers:
Timewave
Clipsal
Festo
Link Instruments

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: Add USB ID for Novatel Ovation MC551 2012-07-16T15:47:48+00:00 Forest Bond forest.bond@rapidrollout.com 2012-06-22T14:30:38+00:00 148e2ad046117ab77ce07b014e3e12fd065c567f commit 065b07e7a14676f4138ce4619d229c0be5a74230 upstream. This device is also known as the Verizon USB551L. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 065b07e7a14676f4138ce4619d229c0be5a74230 upstream.

This device is also known as the Verizon USB551L.

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add id for Cellient MEN-200 2012-07-16T15:47:48+00:00 Dmitry Shmygov shmygov@rambler.ru 2012-06-20T11:51:40+00:00 6e12eaef351797bb7fe1e65d94393db4134dd49c commit 1e2c4e59d2b8797973471b4a287a43eac12a0f40 upstream. Add vendor and product ID to option.c driver for Cellient MEN-200 EVDO Rev.B 450MHz data module. http://cellient.com Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1e2c4e59d2b8797973471b4a287a43eac12a0f40 upstream.

Add vendor and product ID to option.c driver
for Cellient MEN-200 EVDO Rev.B 450MHz data module.
http://cellient.com

Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: Enforce USB driver and USB serial driver match 2012-06-22T18:34:16+00:00 Bjørn Mork bjorn@mork.no 2012-05-30T08:00:14+00:00 72211bf3b8e08f17540168bde0ab3a2f7c2658ca commit 954c3f8a5f1b7716be9eee978b3bc85bae92d7c8 upstream. We need to make sure that the USB serial driver we find matches the USB driver whose probe we are currently executing. Otherwise we will end up with USB serial devices bound to the correct serial driver but wrong USB driver. An example of such cross-probing, where the usbserial_generic USB driver has found the sierra serial driver: May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected sysfs view of the same problem: bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/sierra -rw-r--r-- 1 root root 4096 May 29 18:23 new_id lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2 --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/ total 0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/ total 0 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial -rw-r--r-- 1 root root 4096 May 29 18:33 new_id --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind So we end up with a mismatch between the USB driver and the USB serial driver. The reason for the above is simple: The USB driver probe will succeed if *any* registered serial driver matches, and will use that serial driver for all serial driver functions. This makes ref counting go wrong. We count the USB driver as used, but not the USB serial driver. This may result in Oops'es as demonstrated by Johan Hovold <jhovold@gmail.com>: [11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1 [11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0 [11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0 [11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0 [11812.264197] USB Serial deregistering driver FTDI USB Serial Device [11812.264865] usbcore: deregistering interface driver ftdi_sio [11812.282180] USB Serial deregistering driver pl2303 [11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [11812.283272] usbcore: deregistering interface driver pl2303 [11812.301056] USB Serial deregistering driver generic [11812.301186] usbcore: deregistering interface driver usbserial_generic [11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect [11812.301823] BUG: unable to handle kernel paging request at f8e7438c [11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.301871] *pde = 357ef067 *pte = 00000000 [11812.301957] Oops: 0000 [#1] PREEMPT SMP [11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303] [11812.302008] [11812.302019] Pid: 1323, comm: modprobe Tainted: G W 3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J [11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1 [11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300 [11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58 [11812.302160] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0 [11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [11812.302189] DR6: ffff0ff0 DR7: 00000400 [11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000) [11812.302209] Stack: [11812.302216] f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540 [11812.302325] f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450 [11812.302372] f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590 [11812.302419] Call Trace: [11812.302439] [<c133d2c1>] usb_unbind_interface+0x51/0x190 [11812.302456] [<c12f0344>] __device_release_driver+0x64/0xb0 [11812.302469] [<c12f0c67>] driver_detach+0x97/0xa0 [11812.302483] [<c12f001c>] bus_remove_driver+0x6c/0xe0 [11812.302500] [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140 [11812.302514] [<c12f0ff9>] driver_unregister+0x49/0x80 [11812.302528] [<c1457df6>] ? printk+0x1d/0x1f [11812.302540] [<c133c50d>] usb_deregister+0x5d/0xb0 [11812.302557] [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial] [11812.302575] [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial] [11812.302593] [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial] [11812.302611] [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial] [11812.302716] [<c1080b48>] sys_delete_module+0x158/0x260 [11812.302730] [<c110594e>] ? mntput+0x1e/0x30 [11812.302746] [<c145c3c3>] ? sysenter_exit+0xf/0x18 [11812.302746] [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170 [11812.302746] [<c145c390>] sysenter_do_call+0x12/0x36 [11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f [11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58 [11812.302746] CR2: 00000000f8e7438c Fix by only evaluating serial drivers pointing back to the USB driver we are currently probing. This still allows two or more drivers to match the same device, running their serial driver probes to sort out which one to use. Signed-off-by: Bjørn Mork <bjorn@mork.no> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 954c3f8a5f1b7716be9eee978b3bc85bae92d7c8 upstream.

We need to make sure that the USB serial driver we find
matches the USB driver whose probe we are currently
executing. Otherwise we will end up with USB serial
devices bound to the correct serial driver but wrong
USB driver.

An example of such cross-probing, where the usbserial_generic
USB driver has found the sierra serial driver:

May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected
May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected
May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected

sysfs view of the same problem:

bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/
total 0
--w------- 1 root root 4096 May 29 18:23 bind
lrwxrwxrwx 1 root root    0 May 29 18:23 module -> ../../../../module/usbserial
--w------- 1 root root 4096 May 29 18:23 uevent
--w------- 1 root root 4096 May 29 18:23 unbind
bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/
total 0
--w------- 1 root root 4096 May 29 18:23 bind
lrwxrwxrwx 1 root root    0 May 29 18:23 module -> ../../../../module/sierra
-rw-r--r-- 1 root root 4096 May 29 18:23 new_id
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2
--w------- 1 root root 4096 May 29 18:23 uevent
--w------- 1 root root 4096 May 29 18:23 unbind

bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/
total 0
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3
--w------- 1 root root 4096 May 29 18:33 bind
lrwxrwxrwx 1 root root    0 May 29 18:33 module -> ../../../../module/usbserial
--w------- 1 root root 4096 May 29 18:22 uevent
--w------- 1 root root 4096 May 29 18:33 unbind
bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/
total 0
--w------- 1 root root 4096 May 29 18:33 bind
lrwxrwxrwx 1 root root    0 May 29 18:33 module -> ../../../../module/usbserial
-rw-r--r-- 1 root root 4096 May 29 18:33 new_id
--w------- 1 root root 4096 May 29 18:22 uevent
--w------- 1 root root 4096 May 29 18:33 unbind

So we end up with a mismatch between the USB driver and the
USB serial driver.  The reason for the above is simple: The
USB driver probe will succeed if *any* registered serial
driver matches, and will use that serial driver for all
serial driver functions.

This makes ref counting go wrong. We count the USB driver
as used, but not the USB serial driver.  This may result
in Oops'es as demonstrated by Johan Hovold <jhovold@gmail.com>:

[11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1
[11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0
[11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0
[11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0
[11812.264197] USB Serial deregistering driver FTDI USB Serial Device
[11812.264865] usbcore: deregistering interface driver ftdi_sio
[11812.282180] USB Serial deregistering driver pl2303
[11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[11812.283272] usbcore: deregistering interface driver pl2303
[11812.301056] USB Serial deregistering driver generic
[11812.301186] usbcore: deregistering interface driver usbserial_generic
[11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect
[11812.301823] BUG: unable to handle kernel paging request at f8e7438c
[11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial]
[11812.301871] *pde = 357ef067 *pte = 00000000
[11812.301957] Oops: 0000 [#1] PREEMPT SMP
[11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303]
[11812.302008]
[11812.302019] Pid: 1323, comm: modprobe Tainted: G        W    3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J
[11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1
[11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial]
[11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300
[11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58
[11812.302160]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0
[11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[11812.302189] DR6: ffff0ff0 DR7: 00000400
[11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000)
[11812.302209] Stack:
[11812.302216]  f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540
[11812.302325]  f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450
[11812.302372]  f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590
[11812.302419] Call Trace:
[11812.302439]  [<c133d2c1>] usb_unbind_interface+0x51/0x190
[11812.302456]  [<c12f0344>] __device_release_driver+0x64/0xb0
[11812.302469]  [<c12f0c67>] driver_detach+0x97/0xa0
[11812.302483]  [<c12f001c>] bus_remove_driver+0x6c/0xe0
[11812.302500]  [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140
[11812.302514]  [<c12f0ff9>] driver_unregister+0x49/0x80
[11812.302528]  [<c1457df6>] ? printk+0x1d/0x1f
[11812.302540]  [<c133c50d>] usb_deregister+0x5d/0xb0
[11812.302557]  [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial]
[11812.302575]  [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial]
[11812.302593]  [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial]
[11812.302611]  [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial]
[11812.302716]  [<c1080b48>] sys_delete_module+0x158/0x260
[11812.302730]  [<c110594e>] ? mntput+0x1e/0x30
[11812.302746]  [<c145c3c3>] ? sysenter_exit+0xf/0x18
[11812.302746]  [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170
[11812.302746]  [<c145c390>] sysenter_do_call+0x12/0x36
[11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f
[11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58
[11812.302746] CR2: 00000000f8e7438c

Fix by only evaluating serial drivers pointing back to the
USB driver we are currently probing.  This still allows two
or more drivers to match the same device, running their
serial driver probes to sort out which one to use.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Tested-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>