linux-stable.git/drivers/usb/serial, branch linux-3.8.y Linux kernel stable tree USB: ftdi_sio: enable two UART ports on ST Microconnect Lite 2013-05-08T03:08:17+00:00 Adrian Thomasset adrian.thomasset@st.com 2013-04-24T10:37:35+00:00 73f78129b8c9b8213dd83232c64e85120c8ee9e2 commit 71d9a2b95fc9c9474d46d764336efd7a5a805555 upstream. The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports. The first two ports are reserved for the JTAG interface. We enable by default ports 2 and 3 as UARTs (where port 2 is a conventional RS-232 UART) Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 71d9a2b95fc9c9474d46d764336efd7a5a805555 upstream.

The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports.
The first two ports are reserved for the JTAG interface.

We enable by default ports 2 and 3 as UARTs (where port 2 is a
conventional RS-232 UART)

Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ftdi_sio: correct ST Micro Connect Lite PIDs 2013-05-08T03:08:17+00:00 Adrian Thomasset adrian.thomasset@st.com 2013-04-23T11:46:29+00:00 072dbd59aa8e3aaeb6f39144b81e8a90f683e2f2 commit 9f06d15f8db6946e41f73196a122b84a37938878 upstream. The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB UART FTDI chip. It is also possible to drive STM reference targets populated with an on-board JTAG debugger based on the FT2232H chip with the same STMicroelectronics tools. For this reason, the ST Micro Connect Lite PIDs should be ST_STMCLT_2232_PID: 0x3746 ST_STMCLT_4232_PID: 0x3747 Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9f06d15f8db6946e41f73196a122b84a37938878 upstream.

The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB
UART FTDI chip. It is also possible to drive STM reference targets
populated with an on-board JTAG debugger based on the FT2232H chip with
the same STMicroelectronics tools.

For this reason, the ST Micro Connect Lite PIDs should be
ST_STMCLT_2232_PID: 0x3746
ST_STMCLT_4232_PID: 0x3747

Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: add ftdi_sio USB ID for GDM Boost V1.x 2013-05-08T03:08:17+00:00 Stefani Seibold stefani@seibold.net 2013-04-07T10:08:55+00:00 775994902ebd8c1d8a30e703e6c3de9f332eff22 commit 58f8b6c4fa5a13cb2ddb400e26e9e65766d71e38 upstream. This patch add a missing usb device id for the GDMBoost V1.x device The patch is against 3.9-rc5 Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 58f8b6c4fa5a13cb2ddb400e26e9e65766d71e38 upstream.

This patch add a missing usb device id for the GDMBoost V1.x device

The patch is against 3.9-rc5

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: option: add a D-Link DWM-156 variant 2013-05-08T03:08:15+00:00 Bjørn Mork bjorn@mork.no 2013-04-09T09:26:02+00:00 f1af230b00cafcee75328a631cbca0f656d95442 commit a2a2d6c7f93e160b52a4ad0164db1f43f743ae0f upstream. Adding support for a Mediatek based device labelled as D-Link Model: DWM-156, H/W Ver: A7 Also adding two other device IDs found in the Debian(!) packages included on the embedded device driver CD. This is a composite MBIM + serial ports + card reader device: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7d01 Rev= 3.00 S: Manufacturer=D-Link,Inc S: Product=D-Link DWM-156 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a2a2d6c7f93e160b52a4ad0164db1f43f743ae0f upstream.

Adding support for a Mediatek based device labelled as
D-Link Model: DWM-156, H/W Ver: A7

Also adding two other device IDs found in the Debian(!)
packages included on the embedded device driver CD.

This is a composite MBIM + serial ports + card reader device:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7d01 Rev= 3.00
S:  Manufacturer=D-Link,Inc
S:  Product=D-Link DWM-156
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=500us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: option: Added support Olivetti Olicard 145 2013-05-08T03:08:15+00:00 Filippo Turato nnj7585@gmail.com 2013-04-20T13:04:08+00:00 ebdb6d413bf0f1d1e1ae28e2d8b5bfa032aa28a8 commit d19bf5cedfd7d53854a3bd699c98b467b139833b upstream. This adds PID for Olivetti Olicard 145 in option.c Signed-off-by: Filippo Turato <nnj7585@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d19bf5cedfd7d53854a3bd699c98b467b139833b upstream.

This adds PID for Olivetti Olicard 145 in option.c

Signed-off-by: Filippo Turato <nnj7585@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ti_usb_3410_5052: fix use-after-free in TIOCMIWAIT 2013-04-05T16:26:05+00:00 Johan Hovold jhovold@gmail.com 2013-03-19T08:21:26+00:00 0a9f03287a9290fb61aa74604b4f8fd7fdd3b64e commit fc98ab873aa3dbe783ce56a2ffdbbe7c7609521a upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fc98ab873aa3dbe783ce56a2ffdbbe7c7609521a upstream.

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cypress_m8: fix use-after-free in TIOCMIWAIT 2013-04-05T16:26:05+00:00 Johan Hovold jhovold@gmail.com 2013-03-19T08:21:13+00:00 b8574ededb2102a6fc85e76793bd13e3840fdb37 commit 356050d8b1e526db093e9d2c78daf49d6bf418e3 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Also remove bogus test for private data pointer being NULL as it is never assigned in the loop. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 356050d8b1e526db093e9d2c78daf49d6bf418e3 upstream.

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Also remove bogus test for private data pointer being NULL as it is
never assigned in the loop.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: mct_u232: fix use-after-free in TIOCMIWAIT 2013-04-05T16:26:05+00:00 Johan Hovold jhovold@gmail.com 2013-03-19T08:21:18+00:00 e86d3027d5483a290ba483a2a63cb22963efe01e commit cf1d24443677a0758cfa88ca40f24858b89261c0 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cf1d24443677a0758cfa88ca40f24858b89261c0 upstream.

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ark3116: fix use-after-free in TIOCMIWAIT 2013-04-05T16:26:04+00:00 Johan Hovold jhovold@gmail.com 2013-03-19T08:21:11+00:00 74b63618655dc8fa4bb58f88e0b857cee86a71ae commit 5018860321dc7a9e50a75d5f319bc981298fb5b7 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5018860321dc7a9e50a75d5f319bc981298fb5b7 upstream.

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: f81232: fix use-after-free in TIOCMIWAIT 2013-04-05T16:26:04+00:00 Johan Hovold jhovold@gmail.com 2013-03-19T08:21:14+00:00 4d2206e46ae13b5c724eb7d971cd45e92103cba9 commit 508f940f1407656076a2e7d8f7fa059b567ecac2 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 508f940f1407656076a2e7d8f7fa059b567ecac2 upstream.

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>