linux-stable.git/drivers/usb/serial, branch linux-2.6.39.y

USB: serial: add IDs for WinChipHead USB->RS232 adapter

2011-08-03T19:42:22+00:00

commit 026dfaf18973404a01f488d6aa556a8c466e06a4 upstream.

Add ID 4348:5523 for WinChipHead USB->RS 232 adapter with
Prolifec PL2303 chipset

Signed-off-by: Wolfgang Denk 
Signed-off-by: Greg Kroah-Hartman

USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c

2011-07-09T06:15:08+00:00

commit 309427b6351b763917caac3e4b2ab5651df99823 upstream.

appended patch adds support for the new FTDI FT232H chip. This chip is a
single channel version of the dual FT2232H/quad FT4232H, coming with it's
own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C,
FT4232H has also it's own PID).

The patch was checked on an UM232H module and a terminal program with TX/RX
shorted to that typing in the terminal reproduced the characters.

Signed-off-by: Uwe Bonnes 
Signed-off-by: Greg Kroah-Hartman

USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driver

2011-06-23T22:05:37+00:00

commit a26d31cef06f43a76327c21235e75450869df2b8 upstream.

E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2.

Signed-off-by: Steffen Sledz 
Signed-off-by: Greg Kroah-Hartman

Revert "USB: option: add ID for ZTE MF 330"

2011-06-23T22:05:37+00:00

commit 3095ec895fd5ec19a7cb60b5cbfa766d68a74a24 upstream.

This reverts commit a559d2c8c1bf652ea2d0ecd6ab4a250fcdb37db8.

Turns out that device id 0x1d6b:0x0002 is a USB hub, which causes havoc
when the option driver tries to bind to it.

So revert this as it doesn't seem to be needed at all.

Thanks to Michael Tokarev and Paweł Drobek for working on resolving this
issue.

Cc: Paweł Drobek 
Cc: Michael Tokarev 
Cc: Dominik Brodowski 
Signed-off-by: Greg Kroah-Hartman

USB: option Add blacklist for ZTE K3765-Z (19d2:2002)

2011-06-23T22:05:37+00:00

commit 7e8e62e4a5d26e4cb45f25dddd093837d75616c2 upstream.

The funtion option_send_status times out when sending USB messages
to the interfaces 0, 1, and 2 of this UMTS stick. This results in a
5s timeout in the function causing other tty operations to feel very
sluggish.

This patch adds a blacklist entry for these 3 interfaces on the ZTE
K3765-Z device.

I was also able to reproduce the problem with v2.6.38 and v2.6.39.

This is very similar to a problem fixed in

commit 7a89e4cb9cdaba92f5fbc509945cf4e3c48db4e2
Author: Herton Ronaldo Krzesinski 
Date:   Wed Mar 9 09:19:48 2011 +0000

    USB: serial: option: Apply OPTION_BLACKLIST_SENDSETUP also for ZTE MF626

Signed-off-by: Torsten Hilbrich 
Signed-off-by: Greg Kroah-Hartman

option: add Prolink PH300 modem IDs

2011-06-23T22:05:37+00:00

commit 5c3e4076ee8253c1e3688d10653ddee47a03b0db upstream.

Simple ID addition.

Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

option: add Alcatel X200 to sendsetup blacklist

2011-06-23T22:05:37+00:00

commit 15badbcc8eede58b0d7e53a3acde1c90a7b6e40e upstream.

This modem really wants sendsetup blacklisted for interfaces 0 and 1,
otherwise the kernel hardlocks for about 10 seconds while waiting for
the modem's firmware to respond, which it of course doesn't do.

A slight complication here is that TCT (who owns the Alcatel brand) used
the same USB IDs for the X200 as the X060s despite the devices having
completely different firmware and AT command sets, so we end up adding
the X060s to the blacklist at the same time.  PSA to OEMs: don't use the
same USB IDs for different devices.  Really.  It makes your kittens cry.

Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

option: add Zoom 4597 modem USB IDs

2011-06-23T22:05:36+00:00

commit cdacb598fe7ab85de80908c818dd7d66a2971117 upstream.

Uses Longcheer-based firmware and AT command set.

Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

USB: option: add support for Huawei E353 device

2011-06-03T00:32:27+00:00

commit 610ba42f29c3dfa46a05ff8c2cadc29f544ff76d upstream.

I am sharing patch to the devices/usb/serial/option.c. This allows
operation of Huawei E353 broadband modem using the “option” driver. The
patch simply adds new constant with proper product ID and an entry to
usb_device_id. I worked on the 2.6.38.6 sources. Tested on Dell inspiron
1764 (i3 core cpu) and brand new Huawei E353 modem, Fedora 15 beta.

Looking at the type of change, i doubt it has potential to introduce
problems in other parts of kernel or the driver itself.

Signed-off-by: Marcin Galczynski 
Signed-off-by: Greg Kroah-Hartman

Bind only modem AT command endpoint to option module.

2011-06-03T00:32:21+00:00

commit 15b2f3204a5c878c32939094775fb7349f707263 upstream.

Network interface is handled by upcoming gt_b3730 module.

Removed "GT-B3710" from comment, it is another modem with another USB ID.

Signed-off-by: Marius B. Kotsbak 
Signed-off-by: Greg Kroah-Hartman