linux-stable.git/drivers/usb/serial/visor.c, branch linux-3.8.y

USB: Serial: visor.c: remove debug module parameter

2012-09-18T09:16:28+00:00

Now that all usb-serial modules are only using dev_dbg()
the debug module parameter does not do anything at all, so
remove it to reduce any confusion if someone were to try to
use it.

CC: Rusty Russell 
CC: Alan Stern 
CC: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

USB: serial: remove debug parameter from usb_serial_debug_data()

2012-09-18T08:58:57+00:00

We should use dev_dbg() for usb_serial_debug_data() like all of the rest
of the usb-serial drivers use, so remove the debug parameter as it's not
needed.

Signed-off-by: Greg Kroah-Hartman

USB: serial: rework usb_serial_register/deregister_drivers()

2012-05-08T22:46:14+00:00

This reworks the usb_serial_register_drivers() and
usb_serial_deregister_drivers() to not need a pointer to a struct
usb_driver anymore.  The usb_driver structure is now created dynamically
and registered and unregistered as needed.

This saves lines of code in each usb-serial driver.  All in-kernel users
of these functions were also fixed up at this time.  The pl2303 driver
was tested that everything worked properly.

Thanks for the idea to do this from Alan Stern.

Cc: Adhir Ramjiawan 
Cc: Alan Stern 
Cc: Al Borchers 
Cc: Aleksey Babahin 
Cc: Andrew Morton 
Cc: Andrew Worsley 
Cc: Bart Hartgers 
Cc: Bill Pemberton 
Cc: Dan Carpenter 
Cc: Dan Williams 
Cc: Donald Lee 
Cc: Eric Dumazet 
Cc: "Eric W. Biederman" 
Cc: Felipe Balbi 
Cc: Gary Brubaker 
Cc: Jesper Juhl 
Cc: Jiri Kosina 
Cc: Johan Hovold 
Cc: Julia Lawall 
Cc: Kautuk Consul 
Cc: Kuninori Morimoto 
Cc: Lonnie Mendez 
Cc: Matthias Bruestle and Harald Welte 
Cc: Matthias Urlichs 
Cc: Mauro Carvalho Chehab 
Cc: Michal Sroczynski 
Cc: "Michał Wróbel" 
Cc: Oliver Neukum 
Cc: Paul Gortmaker 
Cc: Peter Berger 
Cc: Preston Fick 
Cc: "Rafael J. Wysocki" 
Cc: Rigbert Hamisch 
Cc: Rusty Russell 
Cc: Simon Arlott 
Cc: Support Department 
Cc: Thomas Tuttle 
Cc: Uwe Bonnes 
Cc: Wang YanQing 
Cc: William Greathouse 
Signed-off-by: Greg Kroah-Hartman

USB: serial: remove usb_serial_disconnect call in all drivers

2012-05-07T21:02:13+00:00

This is now set by the usb-serial core, no need for the driver to
individually set it.

Thanks to Alan Stern for the idea to get rid of it.

Cc: William Greathouse 
Cc: Matthias Bruestle and Harald Welte 
Cc: Lonnie Mendez 
Cc: Peter Berger 
Cc: Al Borchers 
Cc: Gary Brubaker 
Cc: Oliver Neukum 
Cc: Matthias Urlichs 
Cc: Support Department 
Cc: Rusty Russell 
Cc: Alan Stern 
Cc: Mauro Carvalho Chehab 
Cc: Kautuk Consul 
Cc: Bill Pemberton 
Cc: Paul Gortmaker 
Cc: Bart Hartgers 
Cc: Johan Hovold 
Cc: Preston Fick 
Cc: Uwe Bonnes 
Cc: Simon Arlott 
Cc: Andrew Worsley 
Cc: "Michał Wróbel" 
Cc: Andrew Morton 
Cc: Eric Dumazet 
Cc: "Eric W. Biederman" 
Cc: Felipe Balbi 
Cc: Aleksey Babahin 
Cc: Dan Carpenter 
Cc: Jiri Kosina 
Cc: Donald Lee 
Cc: Julia Lawall 
Cc: Michal Sroczynski 
Cc: Wang YanQing 
Cc: Dan Williams 
Cc: Thomas Tuttle 
Cc: Rigbert Hamisch 
Cc: "Rafael J. Wysocki" 
Cc: Kuninori Morimoto 
Cc: Jesper Juhl 
Cc: Adhir Ramjiawan 
Signed-off-by: Greg Kroah-Hartman

USB: serial: remove usb_serial_probe call in all drivers

2012-05-07T20:48:33+00:00

This is now set by the usb-serial core, no need for the driver to
individually set it.

Thanks to Alan Stern for the idea to get rid of it.

Cc: William Greathouse 
Cc: Matthias Bruestle and Harald Welte 
Cc: Lonnie Mendez 
Cc: Peter Berger 
Cc: Al Borchers 
Cc: Gary Brubaker 
Cc: Oliver Neukum 
Cc: Matthias Urlichs 
Cc: Support Department 
Cc: Rusty Russell 
Cc: Alan Stern 
Cc: Mauro Carvalho Chehab 
Cc: Kautuk Consul 
Cc: Bill Pemberton 
Cc: Paul Gortmaker 
Cc: Bart Hartgers 
Cc: Johan Hovold 
Cc: Preston Fick 
Cc: Uwe Bonnes 
Cc: Simon Arlott 
Cc: Andrew Worsley 
Cc: "Michał Wróbel" 
Cc: Andrew Morton 
Cc: Eric Dumazet 
Cc: "Eric W. Biederman" 
Cc: Felipe Balbi 
Cc: Aleksey Babahin 
Cc: Dan Carpenter 
Cc: Jiri Kosina 
Cc: Donald Lee 
Cc: Julia Lawall 
Cc: Michal Sroczynski 
Cc: Wang YanQing 
Cc: Dan Williams 
Cc: Thomas Tuttle 
Cc: Rigbert Hamisch 
Cc: "Rafael J. Wysocki" 
Cc: Kuninori Morimoto 
Cc: Jesper Juhl 
Cc: Adhir Ramjiawan 
Signed-off-by: Greg Kroah-Hartman

USB: serial: visor: convert dbg() to dev_dbg()

2012-05-03T23:40:45+00:00

This removes most of the dbg() calls, as they were just tracing calls,
and converts the remaining ones to dev_dbg().

Signed-off-by: Greg Kroah-Hartman

USB: serial: visor: remove product and vendor module parameters

2012-04-19T22:16:59+00:00

This driver is for devices that are no longer being made, so the ability
to add new device ids when loading the module is not a feature that
anyone uses anymore.  So remove it, which simplifies the startup code a
lot, and saves space.

If you still need to dynamically load device ids, that can be done
through sysfs.

Signed-off-by: Greg Kroah-Hartman

usb-serial: use new registration API in [t-z]* drivers

2012-02-24T20:39:21+00:00

This patch (as1529) modifies the following usb-serial drivers to
utilize the new usb_serial_{de}register_drivers() routines:

	ti_usb_3410_5052, usb_debug, visor, vivopay-serial,
	whiteheat, and zio.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

module_param: make bool parameters really bool (drivers & misc)

2012-01-12T23:02:20+00:00

module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab 
Signed-off-by: Rusty Russell

USB: Add Samsung SGH-I500/Android modem ID switch to visor driver

2011-02-17T18:30:23+00:00

[USB]Add Samsung SGH-I500/Android modem ID switch to visor driver

Samsung decided to reuse USB ID of its old CDMA phone SGH-I500 for the
modem part of some of their Android phones. At least Galaxy Spica
is affected.

This modem needs ACM driver and does not work with visor driver which
binds the conflicting ID for SGH-I500.
Because SGH-I500 is pretty an old hardware its best to add switch to
visor
driver in cause somebody still wants to use that phone with Linux.

Note that this is needed only when using the Android phone as modem,
not in USB storage or ADB mode.

Signed-off-by: Maciej Szmigiero 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman