linux-stable.git/drivers/usb/phy, branch linux-5.4.y

usb: phy: twl6030: Fix incorrect type for ret

2025-10-29T12:59:47+00:00

[ Upstream commit b570b346ddd727c4b41743a6a2f49e7217c5317f ]

In the twl6030_usb_probe(), the variable ret is declared as
a u32 type. However, since ret may receive -ENODEV when accepting
the return value of omap_usb2_set_comparator().Therefore, its type
should be changed to int.

Fixes: 0e98de67bacba ("usb: otg: make twl6030_usb as a comparator driver to omap_usb2")
Signed-off-by: Xichao Zhao 
Link: https://lore.kernel.org/r/20250822092224.30645-1-zhao.xichao@vivo.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: phy: mxs: disconnect line when USB charger is attached

2025-08-28T14:21:18+00:00

[ Upstream commit 87ed257acb0934e08644568df6495988631afd4c ]

For mxs PHY, if there is a vbus but the bus is not enumerated, we need
to force the dp/dm as SE0 from the controller side. If not, there is
possible USB wakeup due to unstable dp/dm, since there is possible no
pull on dp/dm, such as there is a USB charger on the port.

Signed-off-by: Xu Yang 
Acked-by: Peter Chen 
Link: https://lore.kernel.org/r/20230627110353.1879477-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: phy: Fix API devm_usb_put_phy() can not release the phy

2024-11-08T15:20:53+00:00

commit fdce49b5da6e0fb6d077986dec3e90ef2b094b50 upstream.

For devm_usb_put_phy(), its comment says it needs to invoke usb_put_phy()
to release the phy, but it does not do that actually, so it can not fully
undo what the API devm_usb_get_phy() does, that is wrong, fixed by using
devres_release() instead of devres_destroy() within the API.

Fixes: cedf8602373a ("usb: phy: move bulk of otg/otg.c to phy/phy.c")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu 
Link: https://lore.kernel.org/r/20241020-usb_phy_fix-v1-1-7f79243b8e1e@quicinc.com
Signed-off-by: Greg Kroah-Hartman

usb: phy: mxs: remove CONFIG_USB_OTG condition for mxs_phy_is_otg_host()

2024-01-25T22:34:29+00:00

commit ff2b89de471da942a4d853443688113a44fd35ed upstream.

When CONFIG_USB_OTG is not set, mxs_phy_is_otg_host() will always return
false. This behaviour is wrong. Since phy.last_event will always be set
for either host or device mode. Therefore, CONFIG_USB_OTG condition
can be removed.

Fixes: 5eda42aebb76 ("usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()")
cc:  
Acked-by: Peter Chen 
Signed-off-by: Xu Yang 
Link: https://lore.kernel.org/r/20231228110753.1755756-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()

2023-09-23T08:59:49+00:00

[ Upstream commit 5eda42aebb7668b4dcff025cd3ccb0d3d7c53da6 ]

The function mxs_phy_is_otg_host() will return true if OTG_ID_VALUE is
0 at USBPHY_CTRL register. However, OTG_ID_VALUE will not reflect the real
state if the ID pin is float, such as Host-only or Type-C cases. The value
of OTG_ID_VALUE is always 1 which means device mode.
This patch will fix the issue by judging the current mode based on
last_event. The controller will update last_event in time.

Fixes: 7b09e67639d6 ("usb: phy: mxs: refine mxs_phy_disconnect_line")
Signed-off-by: Xu Yang 
Acked-by: Peter Chen 
Link: https://lore.kernel.org/r/20230627110353.1879477-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: phy: phy-tahvo: fix memory leak in tahvo_usb_probe()

2023-07-27T06:37:20+00:00

[ Upstream commit 342161c11403ea00e9febc16baab1d883d589d04 ]

Smatch reports:
drivers/usb/phy/phy-tahvo.c: tahvo_usb_probe()
warn: missing unwind goto?

After geting irq, if ret < 0, it will return without error handling to
free memory.
Just add error handling to fix this problem.

Fixes: 0d45a1373e66 ("usb: phy: tahvo: add IRQ check")
Signed-off-by: Li Yang 
Reviewed-by: Dongliang Mu 
Link: https://lore.kernel.org/r/20230420140832.9110-1-lidaxian@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: phy: tahvo: add IRQ check

2021-09-15T07:47:35+00:00

[ Upstream commit 0d45a1373e669880b8beaecc8765f44cb0241e47 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an
original error code.  Stop calling request_threaded_irq() with the invalid
IRQ #s.

Fixes: 9ba96ae5074c ("usb: omap1: Tahvo USB transceiver driver")
Acked-by: Felipe Balbi 
Signed-off-by: Sergey Shtylyov 
Link: https://lore.kernel.org/r/8280d6a4-8e9a-7cfe-1aa9-db586dc9afdf@omp.ru
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: phy: twl6030: add IRQ checks

2021-09-15T07:47:34+00:00

[ Upstream commit 0881e22c06e66af0b64773c91c8868ead3d01aa1 ]

The driver neglects to check the result of platform_get_irq()'s calls and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing them both to fail with -EINVAL, overriding
an original error code.  Stop calling request_threaded_irq() with the
invalid IRQ #s.

Fixes: c33fad0c3748 ("usb: otg: Adding twl6030-usb transceiver driver for OMAP4430")
Acked-by: Felipe Balbi 
Signed-off-by: Sergey Shtylyov 
Link: https://lore.kernel.org/r/9507f50b-50f1-6dc4-f57c-3ed4e53a1c25@omp.ru
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: phy: fsl-usb: add IRQ check

2021-09-15T07:47:34+00:00

[ Upstream commit ecc2f30dbb25969908115c81ec23650ed982b004 ]

The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling request_irq() with the invalid IRQ #s.

Fixes: 0807c500a1a6 ("USB: add Freescale USB OTG Transceiver driver")
Acked-by: Felipe Balbi 
Signed-off-by: Sergey Shtylyov 
Link: https://lore.kernel.org/r/b0a86089-8b8b-122e-fd6d-73e8c2304964@omp.ru
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: phy: twl6030-usb: Fix a resource leak in an error handling path in 'twl6030_usb_probe()'

2020-06-03T06:21:12+00:00

[ Upstream commit f058764d19000d98aef72010468db1f69faf9fa0 ]

A call to 'regulator_get()' is hidden in 'twl6030_usb_ldo_init()'. A
corresponding put must be performed in the error handling path, as
already done in the remove function.

While at it, also move a 'free_irq()' call in the error handling path in
order to be consistent.

Reviewed-by: Dan Carpenter 
Signed-off-by: Christophe JAILLET 
Signed-off-by: Felipe Balbi 
Signed-off-by: Sasha Levin