linux-stable.git/drivers/usb/otg, branch v3.3 Linux kernel stable tree usb: otg: mv_otg: Add dependence 2012-02-02T20:46:35+00:00 Neil Zhang zhangwm@marvell.com 2012-01-30T03:44:23+00:00 ed2833ac7ee86ee00f6dd3085a32752209fd8b6e This otg driver depends on marvell EHCI driver, so add the dependence. It can fix the following build error on i386: ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined! ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined! Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This otg driver depends on marvell EHCI driver, so add the dependence.
It can fix the following build error on i386:

ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined!
ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined!

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branch 'for-greg' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus 2012-01-25T15:48:44+00:00 Greg Kroah-Hartman gregkh@suse.de 2012-01-25T15:48:12+00:00 7c24814f7eb9a194b11507b43ca0b947415754c2 * 'for-greg' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: musb: omap2430: minor cleanups. usb: dwc3: unmap the proper number of sg entries usb: musb: fix shutdown while usb gadget is in use usb: gadget: f_mass_storage: Use "bool" instead of "int" in fsg_module_parameters usb: gadget: check for streams only for SS udcs usb: gadget: fsl_udc: fix the usage of udc->max_ep drivers: usb: otg: Fix dependencies for some OTG drivers usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle() usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst too usb: gadget: storage: endian fix usb: dwc3: ep0: fix compile warning usb: musb: davinci: fix build breakage usb: gadget: langwell: don't call gadget's disconnect() usb: gadget: langwell: drop langwell_otg support usb: otg: kill langwell_otg driver usb: dwc3: ep0: tidy up Pending Request handling 
* 'for-greg' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: musb: omap2430: minor cleanups.
  usb: dwc3: unmap the proper number of sg entries
  usb: musb: fix shutdown while usb gadget is in use
  usb: gadget: f_mass_storage: Use "bool" instead of "int" in fsg_module_parameters
  usb: gadget: check for streams only for SS udcs
  usb: gadget: fsl_udc: fix the usage of udc->max_ep
  drivers: usb: otg: Fix dependencies for some OTG drivers
  usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle()
  usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst too
  usb: gadget: storage: endian fix
  usb: dwc3: ep0: fix compile warning
  usb: musb: davinci: fix build breakage
  usb: gadget: langwell: don't call gadget's disconnect()
  usb: gadget: langwell: drop langwell_otg support
  usb: otg: kill langwell_otg driver
  usb: dwc3: ep0: tidy up Pending Request handling
usb: mv-otg - Fix build if CONFIG_USB is not set 2012-01-24T22:58:45+00:00 Geert Uytterhoeven geert@linux-m68k.org 2012-01-15T11:36:16+00:00 2053c2d1b116282038fde3d60965ac158b1b8ba2 ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined! ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> -- Inpired by drivers/usb/otg/msm_otg.c. Is this correct? drivers/usb/otg/mv_otg.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined!
ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined!

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
--
Inpired by drivers/usb/otg/msm_otg.c. Is this correct?

 drivers/usb/otg/mv_otg.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers: usb: otg: Fix dependencies for some OTG drivers 2012-01-24T13:43:08+00:00 Fabio Estevam festevam@gmail.com 2012-01-13T17:19:06+00:00 a37670b1c0f5dee021e451130653936742233457 Fix the following build warning: warning: (USB_LANGWELL_OTG && FSL_USB2_OTG && USB_MV_OTG) selects USB_OTG which has unmet direct dependencies (USB_SUPPORT && USB && EXPERIMENTAL && USB_SUSPEND) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
Fix the following build warning:

warning: (USB_LANGWELL_OTG && FSL_USB2_OTG && USB_MV_OTG) selects USB_OTG which has unmet direct dependencies (USB_SUPPORT && USB && EXPERIMENTAL && USB_SUSPEND)

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: otg: kill langwell_otg driver 2012-01-24T13:41:51+00:00 Alexander Shishkin alexander.shishkin@linux.intel.com 2011-12-21T08:19:38+00:00 c1084a56da255ef5385c0f587e16fdc225a5460f The way this driver was added by f0ae849 (usb: Add Intel Langwell USB OTG Transceiver Driver) never even compiled together with langwell_udc, and that's the only way for it to be useful. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v2.6.31+ Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@linux.intel.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com> 
The way this driver was added by f0ae849 (usb: Add Intel Langwell USB
OTG Transceiver Driver) never even compiled together with langwell_udc,
and that's the only way for it to be useful.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable@vger.kernel.org # v2.6.31+
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@linux.intel.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 2012-01-14T04:43:32+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-01-14T04:43:32+00:00 21ebd6c68b5511b55f4f456e4ba17c2d711e3617 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other. 
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
  rtc: max8925: Add function to work as wakeup source
  mfd: Add pm ops to max8925
  mfd: Convert aat2870 to dev_pm_ops
  mfd: Still check other interrupts if we get a wm831x touchscreen IRQ
  mfd: Introduce missing kfree in 88pm860x probe routine
  mfd: Add S5M series configuration
  mfd: Add s5m series irq driver
  mfd: Add S5M core driver
  mfd: Improve mc13xxx dt binding document
  mfd: Fix stmpe section mismatch
  mfd: Fix stmpe build warning
  mfd: Fix STMPE I2c build failure
  mfd: Constify aat2870-core i2c_device_id table
  gpio: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 610
  mfd: Add support for STMPE SPI interface
  mfd: Separate out STMPE controller and interface specific code
  misc: Remove max8997-muic sysfs attributes
  mfd: Remove unused wm831x_irq_data_to_mask_reg()
  ...

Fix up trivial conflict in drivers/leds/Kconfig due to addition of
LEDS_MAX8997 and LEDS_TCA6507 next to each other.
Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2012-01-09T20:09:47+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-01-09T20:09:47+00:00 55b81e6f2795484ea8edf5805c95c007cacfa736 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits) USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c xhci: Clean up 32-bit build warnings. USB: update documentation for usbmon usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops drivers/usb/class/cdc-acm.c: clear dangling pointer drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree drivers/usb/host/isp1760-if.c: introduce missing kfree usb: option: add ZD Incorporated HSPA modem usb: ch9: fix up MaxStreams helper USB: usb-skeleton.c: cleanup open_count USB: usb-skeleton.c: fix open/disconnect race xhci: Properly handle COMP_2ND_BW_ERR USB: remove dead code from suspend/resume path USB: add quirk for another camera drivers: usb: wusbcore: Fix dependency for USB_WUSB xhci: Better debugging for critical host errors. xhci: Be less verbose during URB cancellation. xhci: Remove debugging about ring structure allocation. xhci: Remove debugging about toggling cycle bits. xhci: Remove debugging for individual transfers. ... 
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits)
  USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c
  xhci: Clean up 32-bit build warnings.
  USB: update documentation for usbmon
  usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops
  drivers/usb/class/cdc-acm.c: clear dangling pointer
  drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree
  drivers/usb/host/isp1760-if.c: introduce missing kfree
  usb: option: add ZD Incorporated HSPA modem
  usb: ch9: fix up MaxStreams helper
  USB: usb-skeleton.c: cleanup open_count
  USB: usb-skeleton.c: fix open/disconnect race
  xhci: Properly handle COMP_2ND_BW_ERR
  USB: remove dead code from suspend/resume path
  USB: add quirk for another camera
  drivers: usb: wusbcore: Fix dependency for USB_WUSB
  xhci: Better debugging for critical host errors.
  xhci: Be less verbose during URB cancellation.
  xhci: Remove debugging about ring structure allocation.
  xhci: Remove debugging about toggling cycle bits.
  xhci: Remove debugging for individual transfers.
  ...
mfd: Unify abx500 headers in mfd/abx500 2012-01-08T23:37:39+00:00 Linus Walleij linus.walleij@linaro.org 2011-12-02T13:16:33+00:00 ee66e653ca7425bc8ffca4e00f19a8057cd14e4d This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
This moves all the header files related to the abx500 family into
a common include directory below mfd. From now on we place any
subchip header in that directory. Headers previously in e.g.
<linux/mfd/ab8500/gpio.h> get prefixed and are now e.g.
<linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface
remains in <linux/mfd/abx500.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Merge branch 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next 2011-12-22T22:05:19+00:00 Greg Kroah-Hartman gregkh@suse.de 2011-12-22T22:05:01+00:00 ee0db58ade2c60342a7d648f375d0a4107c39527 * 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (24 commits) usb: dwc3: gadget: add support for SG lists usb: dwc3: gadget: don't force 'LST' always usb: dwc3: gadget: don't return anything on prepare trbs usb: dwc3: gadget: re-factor dwc3_prepare_trbs() usb: gadget: introduce support for sg lists usb: renesas: pipe: convert a long if into a XOR operation usb: gadget: remove useless depends on Kconfig usb: gadget: s3c-hsudc: remove the_controller global usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource usb: gadget: s3c-hsudc: Add regulator handling usb: gadget: s3c-hsudc: use udc_start and udc_stop functions usb: gadget: s3c-hsudc: move device registration to probe usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe usb: gadget: s3c-hsudc: add __devinit to probe function usb: gadget: s3c-hsudc: move platform_data struct to global header USB: EHCI: Add Marvell Host Controller driver USB: OTG: add Marvell usb OTG driver support usb: gadget: mv_udc: drop ARCH dependency usb: gadget: mv_udc: fix bug in ep_dequeue usb: gadget: enlarge maxburst bit width. ... 
* 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (24 commits)
  usb: dwc3: gadget: add support for SG lists
  usb: dwc3: gadget: don't force 'LST' always
  usb: dwc3: gadget: don't return anything on prepare trbs
  usb: dwc3: gadget: re-factor dwc3_prepare_trbs()
  usb: gadget: introduce support for sg lists
  usb: renesas: pipe: convert a long if into a XOR operation
  usb: gadget: remove useless depends on Kconfig
  usb: gadget: s3c-hsudc: remove the_controller global
  usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource
  usb: gadget: s3c-hsudc: Add regulator handling
  usb: gadget: s3c-hsudc: use udc_start and udc_stop functions
  usb: gadget: s3c-hsudc: move device registration to probe
  usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe
  usb: gadget: s3c-hsudc: add __devinit to probe function
  usb: gadget: s3c-hsudc: move platform_data struct to global header
  USB: EHCI: Add Marvell Host Controller driver
  USB: OTG: add Marvell usb OTG driver support
  usb: gadget: mv_udc: drop ARCH dependency
  usb: gadget: mv_udc: fix bug in ep_dequeue
  usb: gadget: enlarge maxburst bit width.
  ...
Merge branch 'for-next/xceiv' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next 2011-12-22T21:59:05+00:00 Greg Kroah-Hartman gregkh@suse.de 2011-12-22T21:58:59+00:00 06e298b46417bc729b996396a068daf462e2ab62 * 'for-next/xceiv' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: otg: trivial cleanups 
* 'for-next/xceiv' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: otg: trivial cleanups